Air Compressor

Atlas Copco GA-37

Condition: excellent (used), Year of construction: 2015, operating hours: 67,772 h, functionality: fully functional, Atlas Copco GA37VSD+FF screw compressor. 37 kW with 13 bar and 6.55 m3/min. Inverter and dryer integrated. Ledpfxsyilkce Agzohc

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Top roll x15 with prebending min.120x120 / 3000 mm Voltage 3x400 V Lhjdpfx Ajw D Uqxsgzjc Working speed 2-5 m/min Power Power max. 30000 W Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: good (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 292.2 m³/h, pressure (max.): 13 bar, Equipment: type plate available, S014584 PROD - ATLASCOPCO TYPE - GA37 PLUS S/N - API509425 YEAR - 2006 POWER (kW) - 37 OUTPUT. (m3/min) - 4.87 Lhedpfjrt U Spox Agzjc CIS (bar) - 13

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Lhsdpfxjyg H Tcj Agzjc

Condition: good (used), Height: max 1,800 mm Lhsdpfx Ajqqkx Nsgzjc Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Electrical system: 380 VAC Electrical system: 50 Hz Electrics: 3 PH Clamping force: max 5,500 N Equipment - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 - Control system: S7

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Lsdpfx Aot Hdh Njgzehc Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: excellent (used), Year of construction: 2011, operating hours: 68,433 h, functionality: fully functional, Atlas Copco GA37VSDFF screw compressor. 13 bar, 7.25 m³/min. Integrated dryer and inverter. Motor and compressor element overhauled at approximately 65,000 operating hours. Lhsdpfox Sv Smjx Agzsc

Condition: good (used), functionality: fully functional, working width: 3,100 mm, distance between stands: 2,550 mm, back gauge: 1,500 mm, pressing force: 110 t, Bending capacity: 110 Ton Bending length: 3.100 mm Distance between columns: 2.550 mm Back gauge: 1.500 mm Stroke length: 150 mm Throat: 250 mm Rapid approach speed: 100 mm/sec. Bending speed: 8 mm/sec. Return speed: 65 mm/sec. Controller: ESA Kvara S630 Touch Featured with: - Foot pedal - Various tool sets - Light screen security Merlino - Controls renewed in 2018 Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 320 x 160 x 244 cm Ljdpfowi N T Esx Agzshc Machine weight: 8.700 kg

Condition: excellent (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 425.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA37 PLUS Ljdpfx Agjrz Rtbezshc S/N - API510029 YEAR - 2006 POWER (kW) - 37 OUTPUT. (m3/min) - 7.09 CIS (bar) - 7.5 HRS (DOC/GENERAL) - 6043 WAVE - no COND. DRYER - no COOLED (POW/WATER) - air ON TANK - no NEW/USED - USED

Condition: good (used), Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA37VSDFF SERIAL NO.: API580058 Lhedpfoxyarqjx Agzoc YEAR: 2009 POWER (kW): 37 CAPACITY (m3/min): 7.25 PRESSURE (bar): 12.5 OPERATING HOURS (DOC/TOTAL): 100392 FREQUENCY INVERTER: yes BUILT-IN DRYER: yes, R404 1.25kg HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTATION: no CONNECTION: 2'' NEW/USED: USED

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Ledpfx Agovgrh Uozohc Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2000, Year of manufacture 2000 Lodpfx Aowf U Dbsgzshc 10 bar

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Atlas Copco GA 37 FF With built-in compressed air refrigerant dryer. Refrigerant R 404a. Lodpfx Aerk Nt Ujgzjhc

Condition: refurbished (used), functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Lsdoxl Rqbspfx Agzshc Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: excellent (used), Year of construction: 2009, SCREW COMPRESSOR ATLAS COPCO GA37FF 37Kw DEHUMIDIFIER Screw compressor ATLAS COPCO GA37FF machine with air dryer after service Technical data: capacity: 6.42 m3/min; 37 KW engine; max pressure 7 bar; Ljdpetukfuofx Agzjhc year;2009 mileage;10290h!!! Compressor fully functional, ready to work, warranty we provide service.