FL-430 Automatic Labeling Machine

Automatische Etikettiermaschine FL-430

Condition: like new (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 61373, IT IS IN WORKING CONDITION Hfsdpfx Ajvwlf Ijh Nob

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, cutting width (max.): 1,680 mm, Equipment: safety light barrier, Cutting line Perfecta Year: 2013, little used Bigger, faster, more efficient: With a cutting width of 168 (66"), the Perfecta high-speed cutters have no problems processing large formats. Consisting of: Pallet loader Perfecta/Baumann BASA 7 Paper jogger Rear loading system Hsdpfxjwr Dgxe Ah Nefb Perfecta 168 TS guillotine cutter - 3 color monitors with touchscreen: Cuttronic - Automatic adjustment - Cutting table, side tables and stacker continuously corrosion-free with air cushion - Protection by photo cells - Number of knives: total 6 Unloading system Perfecta BA 6, on the left side of the guillotine cutter This robust cutting line from 2013 is in very good condition and still in production. Inspection possible by arrangement. Available immediately as a complete unit: - BASA 7 pallet feeder - vibrating table - with ZTS 2750 gripper transport system automatically to the rear table of the 168 guillotine cutter - BA6 stacker. This cutting line is suitable for medium to large print runs for continuous, fast, and precise cutting. It is equipped with corrosion-free stainless steel surfaces on the cutting and side tables, a powerful blower for the air cushion system, stop angle correction, and hold-down device.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, type of input current: AC, total length: 5,000 mm, total height: 1,500 mm, total width: 1,300 mm, input voltage: 400 V, overall weight: 850 kg, year of last overhaul: 2025, product height (max.): 120 mm, product height (min.): 10 mm, product length (max.): 550 mm, product length (min.): 50 mm, product width (max.): 230 mm, product width (min.): 20 mm, Ilapak SMART Horizontal Flowpack packaging machine, used machine, in very good condition - like new Machine data: - Year of manufacture: 2010 - Machine speed up to 100 cpm - Sealing jaw length 250mm, new straight knife - Permissible dimensions of the packed product: length: 50-550mm, width: 20-230mm, height up to 120mm - Adjustable forming box Hfodpfx Ahswnumuo Njb - Maximum length of the roll with foil: 630mm - NPNB system (No product no bag) - Sensor for working with printed foil - Total length of the machine: 5m, width: 1.3m height: 1.5m - Weight: 850 kg Additional systems: - Air extraction from the vacuum package - Gusseting foil tabs Optional: - Printer - Labeller

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Manufacturer: Trens Hodpfx Aehlp Iwjh Nefb Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.

Year of construction: 2020, condition: new, Semi-automatic carton former - Starbox 65 - Connecting Robotape-Starbox 65 - Set of 4 swivel castors with brake Hfedpof Evh Tjfx Ah Nob Sample photos - machine is still in original packaging

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors. Hfodoh U A I Ropfx Ah Neb

Year of construction: 2010, condition: used, Mettler Toledo PAS 3012 check-weigher with labeling machine. The labeling had can be electrically moved in all directions for an accurate positioning of the labels. - Max. weight: 6KG - Min. weight: 0.020KG - E: 0,001KG - Rated for 70 packs per minute Hsdpeivnqcefx Ah Nofb

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. Hfodpfx Ahjh Eibaj Nob CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), Year of construction: 2003, Brochure production line Horizon VAC 100 A+M (year 2009) with stitching-folding station SPF 20A and trimmer FC 20A Hsdpov Sqr Nofx Ah Njfb

Condition: new, Year of construction: 2025, Through our many years of experience in service, we have decided to develop and produce our own milling machines. Hjdpsh Su Ipofx Ah Njfb The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.