Compressor

Atlas Copco GA37

Condition: used, operating hours: 12,100 h, functionality: fully functional, machine/vehicle number: 010460, We are offering a high-performance industrial compressor from Atlas Copco for sale. The unit is used, has been regularly maintained by qualified personnel, and is immediately ready for operation. Technical specifications: Type: GA37 VSD+ FF (VSD+ technology for maximum energy efficiency) Operating hours: 12,100 hours Nedpfx Amjzdqz Dsysld Condition: Used, very well maintained, and immediately ready for operation. The compressor can be inspected and tested on-site in Kiel after prior arrangement.

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! Nlodpfx Amjq R N Tqsyjd also available as Craneset

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Nedpfxjwlp Hdj Amyold Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Nlodpfx Aehpx U Ajmyod

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) Nlsdjxgumcspfx Amyed – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Operating temperature: 76 °C Volume flow: 131.9 l/s Nlodpszf Afqjfx Amyod Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Oil leaks checked Air leaks checked Belt tension checked Drive coupling checked

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, Screw Compressor Atlas Copco GA37VSDFF Nsdpfx Amey Rva Ijyold Integrated inverter and dryer 37 kW 12.80 bar 7.37 m³/min Year of manufacture: 2012 Operating hours: 72,651

Condition: as good as new (ex-display), JAN REILING BV has an extensive warehouse with more than 15,000 different DEMAG craneparts, from a nut to a complete crane. In addition to new parts, we also supply used parts, hoists and cranes. Our used hoists, cranes, parts and drives are ready in our warehouse completely overhauled. JAN REILING BV immediately supplies what you are looking for. JAN REILING BV has built up an extensive supplier network within Europe. In addition to DEMAG, we can also supply you with parts from all other brands quickly and affordably. We supply various Demag parts new from stock, such as a: ropeguides Rope brakes hoistingmotors drivingmotor gearbox brake hoisting motor bottomblock loadhook runningwheels trolley pushbutton radiocontrol cabledrum types like : KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P1250 P1050 P1600 P2100 DH DMR DR DC PK DK Nlodpfsh Upyhjx Amyod contact us for the possibilities We supply both new and used

Condition: excellent (used), Year of construction: 2011, ATLAS COPCO GA37 SCREW COMPRESSOR, 37Kw, 2011! Nsdsi D Ef Hspfx Amysld ATLAS COPCO GA37 screw compressor, serviced machine. Technical data: capacity: 6.30 m3/min; engine power: 37 KW; maximum pressure: 8 bar; year: 2011; operating hours: 3431h!!! The compressor is fully functional, ready for operation, and comes with a warranty. We provide service support.

Condition: excellent (used), Year of construction: 2011, ATLAS COPCO GA37 SCREW COMPRESSOR, 37 kW, 2011! ATLAS COPCO GA37 screw compressor – machine after service. Technical data: capacity: 6.30 m3/min; engine power: 37 kW; maximum pressure: 8 bar; year: 2011; operating hours: 6924 h!!! Compressor is fully functional, ready for operation, with warranty. Nljdpfxoi E Hncj Amysd We provide service support.

Condition: good (used), Year of construction: 2003, Megamat Type: FSE 3.5 2448/816-3785 Device no.: 35.0070 Year of manufacture: 2003 Unit height: approx. 3785 mm Unit width: approx. 2640 mm Unit depth: approx. 2710 mm Number of trays: 20 Tray width: approx. 2240 mm Tray depth: approx. 820 mm Tray height: approx. 55 mm Nledpfx Ajytgbgjmysd Compartment load capacity: 307 kg Total load capacity: 70,000 kg Colour: white

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: API502813, overall weight: 970 kg, volume flow: 280.8 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, We offer: ATLAS COPCO GA37 Technical data: S/N: API502813 YEAR: 2005 CAPACITY (kW): 37 OUTPUT (m3/min): 4.5 CIS (bar): 13 Nlsdpfx Aov Hqkusmysd HRS (DOC/GENERAL): 95183 INVERTER: no BUILT-IN DRYER: no EXCHANGER: no COOLED (AIR/WATER): air ON THE TANK: no DOCUMENTS: no CONNECTION: 2' and 1 1/2' S014585

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Nljdpfx Aot Hdh Nomyjd Mileage 13200 hours The compressor is fully functional.

Condition: good (used), Year of construction: 2009, Megamat FSE Lift Type: FSE 7.1 2448/612-4260 Serial no.: 500002883 Year of manufacture: 2009 Unit height: approx. 4260 mm Unit width: approx. 2850 mm Unit depth: approx. 2400 mm Nljdpeyxyxqsfx Amysd Number of trays: 33 Tray width: approx. 2670 mm Tray depth: approx. 816 mm Maximum tray load: 400 kg Total load capacity: 70,000 kg Colour: beige

Condition: good (used), Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA37VSDFF SERIAL NO.: API580058 YEAR: 2009 POWER (kW): 37 CAPACITY (m3/min): 7.25 PRESSURE (bar): 12.5 OPERATING HOURS (DOC/TOTAL): 100392 FREQUENCY INVERTER: yes Nledjxyarqopfx Amysd BUILT-IN DRYER: yes, R404 1.25kg HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTATION: no CONNECTION: 2'' NEW/USED: USED