Screw compressor GA 26 VSD FF

Atlas Copco GA 15VSD FF

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Iedpfx Adsxdc Uvsnja

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new exhibition machine - Isdpfxeu R S Hpj Adnja

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control Isdpfx Adsk Egrpsnea - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Grinding material transport: The cutting mills are equipped with an extraction system and bagging station as standard. A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material. Iodoghgbtepfx Adnsa

Condition: used, Year of construction: 1982, grinding length:500 mm grinding width:225 mm workpiece height:400 mm total power requirement:5,5 kW weight of the machine ca.:3,4 t NC81 NC-control, table belt drive 100-25000 mm/min., automatic feed, electronic dressing unit 020 NC-K with RPM-compensation, coolant pump, emergency cut-off Iodpfxocxxtms Adnja

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. Isdpfxoghgbhs Adnja In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: not inspected (used), Year of construction: 2008, Parker Hannifin Instron Hydraulic power unit Year of construction 2008 Power 90KW Main fuse 200A Working pressure 285bar Iodpeq Nyw Ajfx Adnsa flow rate 165L/min Tank 850 litres The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Atlas Copco Consisting of: Ijdpfx Adovx Nmfjnsa Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Forklift is provided.

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Condition: New machine Center height: 200 mm Center width: 1,000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Equipped as standard with Ijdpfx Ajq Ui Tdsdnea - 3-axis digital readout DPA 21 - Machine base - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E - Torsion steel holder ED - Chuck protection cover, electrically fused - Oil filling - Operating tool - Operating instructions

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact cutting mills in the GSC series are completely soundproofed cutting mills and therefore particularly quiet. The integrated soundproofing ensures ideal accessibility to the cutting mill itself and for changing the blades and screens thanks to its well thought-out design. The noise protection is based on the use of the latest soundproofing materials. The housings, manufactured in a stable steel/welded construction, in conjunction with the V-cut rotors (except GSC 300/300), enable a long service life and universal applicability. The tangential housing geometry means that even bulky feed materials are easily accepted and shredded by the rotor. Iedpfx Adsghgbwsnea All machines in the GSC series always deliver high-quality ground material - regardless of whether the feed material is injection molding or blow molding waste, profiles, plates or films. The types in the GSC series are cost-effective, very reliable, easy to clean and have a long service life. Integrated sound insulation: The integrated sound insulation ensures a pleasant working environment with a low noise level. The optimal design ensures ideal accessibility to the machine. Mobile compact design: The integrated sound insulation makes the cutting mills compact and mobile. The machines can be transported to any location using a pallet truck or forklift. ZERMA offers a variety of options such as extraction systems, conveyor belts, metal detectors, fine material separators.