Conveyor belt Arburg (76A)

Arburg

Condition: excellent (used), Year of construction: 2010, clamping force: 600 kN, Equipment: documentation/manual, ARBURG ALLROUNDER 370 S 600-170 Year: 2010 CLAMPING UNIT Clamping force: 600 kN / 60 t Distance between tie bars H: 370 mm Distance between tie bars V: 370 mm Mould platen dimensions: 510 × 510 mm* Mould opening stroke: 400 mm* Minimum mould height: 200 mm* Maximum daylight: 600 mm* Maximum movable mould weight: 360 kg* Ejector force: 30 kN* Ejector stroke: 125 mm* INJECTION UNIT Injection unit: 170 (model designation) Screw diameter: 20 mm Shot volume: To be confirmed Shot weight (PS): To be confirmed Injection pressure: To be confirmed Screw stroke: To be confirmed Screw L/D ratio: To be confirmed Chsdszn I H Eopfx Agrsd HYDRAULIC SYSTEM Drive: Hydraulic Hydraulic core pullers: 1× CONTROL & EQUIPMENT Hot runner zones: 6× Robot interface: NO GENERAL INFORMATION Machine type: Horizontal Operating hours: 60,700 h Year of manufacture: 2010

Condition: excellent (used), functionality: fully functional, Buffer belt, stainless steel dryer 3-piece buffer belt Belt width: 1500 mm Stainless steel Length: approx. 17.5 meters Width: 2500 mm Height: 3050 mm Weight according to specification: approx. 8000 KG Chjdpfxswb Sqws Agrjd Elements under the belt are not included

Condition: used, Year of construction: 2006, Arburg 370 U 600-290 (2006) CLAMPING UNIT Chjdpfxe Ahpmmo Agrod Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, Year of construction: 2017, overall weight: 8,850 kg, Model 570 A 2000-400 Year of manufacture: 03/2017 Net weight according to the technical data sheet for the basic configuration: 8,850 kg Csdo Ahkh Ajpfx Agrshd with the following peripherals: - KUKA robot KR 16-2, year of manufacture 2017, with control panel - KUKA robot KR 10 R1100 sixx, year of manufacture 2017, with control panel - FARRAGTECH Card 40S compressed air granulator dryer - NZME temperature control unit station - Conveyor belt - Machine stairs - Machine documentation as shown - Enclosure as shown, without any further accessories or items depicted in the background, not tested for function or completeness This ARBURG 570 A 2000-400 injection molding machine will be auctioned online in our industrial auction / machine auction "Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks and various". You can find this and many other items from the areas of temperature control units, operational equipment and storage technology on our platform.

Year of construction: 2010, condition: good (used), Graham steam tunnel Chsdpfefk Idusx Agrjd Model: Z3271 2010, Stainless frame and stainless mesh belt, 3000mm x 380mm belt, variable speed, with Hydromatik steam generator, 3Ph

Condition: used, Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 250 mm, plate length: 570 mm, plate width: 570 mm, total length: 4,300 mm, total width: 1,700 mm, overall weight: 3,640 kg, Arburg 420C-1000-290 injection molding machine (261) with sorting flap Number: 261 Availability: in stock Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35 Chode Ahhfujpfx Agrsd Injection weight [g]: 132 Injection pressure [bar]: 2000 Closing force [kN]: 1000 Column spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. mold height [mm]: 250 Control type: Selogica Tongue: English, German Installed power [kW]: 21.4 Working hours [h]: 59000(new pump 13000) Weight [kg]: 3640 Dimensions [mm]: 4300 x 1700 Feed hopper: NO Robot socket: Yes Core string: 1x Air valve: 1x Control of heating for molds: 3x

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 90 mm, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s Cedpfx Agjydnigerohd • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Csdpfjydp Abjx Agrehd

Condition: used, Year of construction: 2006, Arburg 370U 600-290 (2006) 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Chjdpfxo Ahgdqs Agrjd Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2014, operating hours: 60,720 h, machine/vehicle number: 227851, clamping force: 2,000 kN, screw diameter: 45 mm, clearance between the columns: 570 mm, injection weight: 291 g, mold height (min.): 250 mm, ejector force: 70,000 N, ejector stroke: 200 mm, MACHINE WITH DOCUMENTED PURCHASE EVALUATION I offer this used Arburg Allrounder 570 S 2000-800, manufactured in 05/2014, with Multilift Select (lateral) and protective housing. The redacted purchase evaluation is available as a separate PDF document. The previous owner placed great emphasis on the maintenance of the hydraulic system: Additional oil filtration operated around the clock to protect proportional and solenoid valves from contamination – ensuring reliable operation, high machine availability, and long-term value retention. TECHNICAL DATA Machine number: 227851 Type: hydraulic Clamping force: 2,000 kN / 200 t Control system: Selogica Injection unit: 800 Screw diameter: 45 mm Shot weight: 291 g PS according to seller's form Tie bar spacing: 570 x 570 mm Platen dimensions: 790 x 790 mm Minimum tool height: 250 mm Opening stroke: 900 mm according to seller's form Ejection stroke / force: 200 mm / 70 kN Operating hours according to current seller's form: 60,720 h Automatic cycle hours according to current seller's form: 54,616 h 400 V, 3~, 50 Hz; Total connected load according to nameplate: 105 kW HANDLING AND EQUIPMENT Multilift Select (lateral), 15 kg load capacity, No. 604575 X/Y/Z: 900/1,000/1,600 mm B- and C-axis pneumatic 4 x vacuum; 4 x dual-acting grippers Customer-side inputs and outputs Protective housing 12 hot runner zones 2 core pulls and 1 blow function Interfaces for chiller and dryer Variable speed pump, confirmed as IE2 by the seller DOCUMENTED MACHINE CONDITION Technical information from the seller's form, machine photos, and email from 04.11.2026. According to the seller, the machine was demonstrated in operating temperature. Technical documentation is available, according to the seller. No wear measurement of the screw, check valve, and cylinder is available. Dryer, chiller, and other peripherals are not confirmed as part of the scope of supply. Cedpfx As Ahzy Rogrshd Price on request. I would be happy to discuss availability, inspection, as well as delivery and payment terms with you personally.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, There are 14 pieces of steep conveyor belts with corrugated edge for sale, the price is per piece; A few data about the conveyor belt ; L: 2000mm NB: 270mm GB: 470mm Belt speed constant : 4m/min Cleat height : 30mm Corrugated edge : 30mm high Chedsu Smlispfx Agrsd Hopper in the lower area Heat resistant belt

Condition: excellent (used), Year of construction: 2015, operating hours: 54,244 h, machine/vehicle number: 231099, clamping force: 2,200 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, injection weight: 359 g, mold height (min.): 350 mm, ejector force: 70,000 N, ejector stroke: 200 mm, MACHINE WITH DOCUMENTED PURCHASE EVALUATION I offer a used Arburg Allrounder 570 S 2200-800, manufactured in 03/2015, with Multilift Select and protective enclosure. The redacted purchase evaluation documents the seller's information regarding technology, condition, maintenance, and equipment. TECHNICAL DATA Clamping force: 2,200 kN / 220 t Control system: Selogica Injection unit: 800 Screw: 50 mm Shot weight: 359 g PS according to seller's form Tie bar spacing: 570 x 570 mm Platen dimensions: 790 x 790 mm Minimum mold height: 350 mm Opening: 1,000 mm according to seller's form Ejection stroke / force: 200 mm / 70 kN Pump operating hours: 54,244 h Automatic operating hours: 48,230 h Operating hours according to control system photo dated 04.11.2026 Machine number: 231099 Chodpfe Ahzy Hex Agrjd Total connection according to nameplate: 105 kW; 400 V, 3 ~, 50 Hz HANDLING AND EQUIPMENT Multilift Select transverse, 15 kg load capacity, No. 605572 X/Y/Z: 900/1,000/1,600 mm X-axis synchronized with ejector for precise part removal B- and C-axis pneumatic 4 x vacuum, 4 x gripper double-acting Customer-side inputs and outputs Protective enclosure 12 hot runner zones 2 core pulls, 2 blow functions Interfaces for temperature control unit and dryer Controlled pump, IE2 according to seller CONDITION AND AVAILABILITY Regularly maintained; last maintenance according to seller, internally in September 2026. No known defects or outstanding repairs are stated in the seller's form. The purchase evaluation is a documented seller's statement. Available according to the seller's form from the beginning of 2027. Price on request. I would be happy to discuss inspection, delivery, and payment terms with you personally.

Condition: not inspected (used), Year of construction: 1996, Used ARBURG 221 M 250-55 plastic injection molding machine. Clamping force: 250 kN (25 tons). Year of manufacture: 1996. Equipped with two original control cabinets, without a display screen. Chsdpfs Ahzdkox Agrjd Condition: Sold as is. Unique price: €1,000. Free loading onto your truck by our team.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. Chsdoz Sqq Tepfx Agrod The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Chjdpfx Age Ahx Rgerod Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz