Multihead Weigher

AMTEC MHW 10HD 08-SV

Year of construction: 1999, condition: excellent (used), Rovema VPI 260E vffs machine with powder auger filler. Optionally with full new electronics. Ljdoiwdgpepfx Ad Njhb

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) Lsdpfx Adoqt Dmyj Nehb 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Gainsborough bagger and All-Fill powder depositor. Ljdpfx Ajvvpphjd Nehb

Condition: ready for operation (used), Year of construction: 2002, There are three identical vertical bag filling machines available, weight: 1.1t. Lodponfvxzefx Ad Njhb

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Lsdsxlptujpfx Ad Nshb Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: good (used), Year of construction: 2017, REF: MM5724 Complete automatic volumetric filling and bagging system with PLC control panel, suitable for packing many dried snack-type products such as nuts, seeds, grains, dried fruit, etc, into pillow-packs. The product moves from the opper via a vibrating tray / chute into a turning bowl with cup openings. The amount per cup is then dropped into the funnel through the forming tube into the bag. The size of the cups determines the filling amount. The turning bowl is adjustable in height so even with the same size cup there are various filling sizes possible.  Lhsdpot Sw Elsfx Ad Nob Model - MWM-900 Automatic Form Fill Seal Machine.  Sealing jaws: Horizontal - 260mm. Vertical - 300mm.  Pack size range - Length: 50mm - 320mm. Width: 140mm (with current forming tube/shoulder).  Speed - up to 30 packs/minute, depending on product size.  Filler - volumetric, 20g-1000g range. Can double drop for larger pack sizes.  Electric supply - 440 V / 50 hz / 3 phase. Features a metal detector at the bottom of the filling tube / inside the forming assembly and has hot foil stamping for printing on pouch. Previously used for packing popcorn. 

Condition: excellent (used), functionality: fully functional, power: 13 kW (17.68 HP), first registration: 01/1992, fuel: diesel, Year of construction: 1992, operating hours: 900 h, machine/vehicle number: 00450, Equipment: all wheel drive, front power take-off, hydraulics, rear power take-off, trailer coupling, Tractor Iseki TU 320 FHUE, FIN: 00450, 13 kW, 1170 cc, 900 operating hours, with front and rear hydraulic lift and connections, front and rear PTO connection. First registration: 01.1992. Lsdpexw Nqwjfx Ad Nehb

Year of construction: 2025, condition: new, Industrial mixing machine for blending dry, moist or pasty products, specifically designed for products with large net weight. The horizontal single shaft with the double ribbon mixers is blending the materials into high uniformity in a few minutes. – Specifications: agitator type: single-shaft double ribbon agitator; capacity: max. 9000 liters; max. speed of the machine in neutral: 20 rpm; power: 90kW; machine dimensions: L6500xW2100xH2800mm; weight: 9800kg. Lhsdpfxev Nly As Ad Neb That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 12,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/1998, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 1 mm, total length: 2,550 mm, total width: 1,600 mm, suspension: steel, tire size: 235/75R17.5, wheelbase: 5,400 mm, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing eyes, container lock, U-protection, pneumatic adjustable drawbar, aluminum side wheel guards, twin tyres, storage box, removable drop sides Wheelbase: 5400 mm Body: Trailer for roll-off containers in lengths 6m-6.75m SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for plug-in locking hooks, 4x pockets for plug-in container centering and skip stop. The trailer can also be used as a flatbed! Aluminum side walls 600 mm high are included with the trailer! Ljdpei Rpxwjfx Ad Nehb Drive-on ramps available for an extra charge of 900.00€ net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. Lhjdpfswld Tfex Ad Neb For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm