Compressor

Aircraft Kolbenkompressor AIRSTAR 703/270/10 V mit AD2000

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges Kodpfxjwka S Ij Ah Njll - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2018, fuel type: diesel, weight max. in kg 1800 kg stroke 4250 mm Klodpfst Symlex Ah Nsl fork length 1200 x 120 x40 mm free lift 150 mm construction height 2746 mm

Condition: good (used), Year of construction: 2009, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler Ksdpoqw D Eijfx Ah Noll -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm -Total weight: 99 kg

Condition: new, empty load weight: 420 kg, maximum load weight: 880 kg, overall weight: 1,300 kg, loading space length: 2,980 mm, loading space width: 1,520 mm, loading space height: 1,650 mm, tire size: 165r13c, Poly box trailer Cargo-Poly2 with side door from the manufacturer Cheval Liberte / Debon. Elegant and aerodynamic box trailer with polyester body, available in various colors. The handling of this car trailer is superb. The polybox is equipped with the Pullman2 running gear. A low entry height of just 35 cm ensures a low center of gravity, which is ideal for optimum driving characteristics. Added to this is the independent wheel suspension with trailing arms, coil springs and shock absorbers to automotive standards. The low loading height ensures a flat drive-on angle for loading vehicles such as motorcycles and quad bikes. Kodpfxeidzp Rs Ah Nsll For other loads, this box also has a drive-on flap that can also be opened to the side as a door to load pallets, for example. The car trailer is equipped with a poly body, folding door system, side door, 100 km/h, rear supports, interior light, support wheel, lashing eyes, sturdy frame and a V-drawbar. We offer motorcycle rockers, motorcycle stand rails, motorcycle lashing straps, lashing straps and additional lashing eyes as accessories. The body is splash-proof. --- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: used, Vertical band saw MÖSSNER REKORD type SM 420 Machine No. 17010 Year of construction 1968 roll diameter 420 mm throat width 415 mm throat in height 265 mm table size 605 x 600 mm Kjdjdzqc Repfx Ah Nell band speed 18 - 562 m/min. 8 steps saw band length min/max. 3150 / 3260 mm drive power 1,1 / 1,7 kW Mains connection 380 V 50 Hz - Saw band speed via 4 gear steps and 2 motor speeds - saw blade butt welding unit IDEAL BS 0-16 with shear and grinding stone - swivelling working table in 2 axes space requirement L x W x H 950 x 750 x 1900 mm weight 570 kg good condition

Condition: new, The FPK 6.3 is a highly versatile Conventional Vertical Milling Machine, ideal for Toolroom Milling Machines, and an essential addition to any mechanical production environment focused on tool and mold making. This compact yet robust machine features a premium cast-iron column for maximum dynamic rigidity and constant precision. Operators will appreciate the ergonomically arranged controls, swivelling control panel, and digital position indicator, which enhance usability. With precise preloaded ball screws on all axes, an automatic feed system with rapid feed, and an infinitely variable main spindle drive, it ensures efficient operation and precision. The large work table and generous travel dimensions further support its versatile applications. Included with the FPK 6.3 is an extensive accessory package alongside standard equipment such as electronic hand-wheels and a central lubrication system. Experience the robust performance of KNUTH's FPK 6.3 and consider ordering online to elevate your milling capabilities today. Kedpfsqhkm Sjx Ah Nell

Condition: used, Year of construction: 2004, Saw unit: pivots 45°. Carriage length: 3200 mm. Maximum saw blade diameter: 450 mm. Saw blade bore: 30 mm. Motor power: 7.5 kW. Max. Cutting width: mm Control panel: at eye level Height adjustment: input via keyboard Tilt adjustment: input via keyboard Tilt angle display: digital Cutting width display: digital Table extension length: yes Cross-cutting at the cross stop: 3200 mm Cross stop display: scale Scoring device adjustment: electric Scoring blade: PSV Protective cover: yes End position lock: yes Automatic motor brake: yes Speeds: 2500/3500/5000 rpm Description: Cutting height at 450 sheets, 150 mm Weight approx.: 1180 kg Dimensions: 3200 x 1800 x 1800 mm Extraction diameter: 1 x 80, 1 x 120 mm Storage location: Nattheim Ksdjx Ngzaspfx Ah Njll

Condition: excellent (used), Year of construction: 2011, Altendorf Panel Saw F 45 Double roller carriage with carriage length 3000 mm Cutting width: 1300 mm with Digit X Drive power: 5.5 kW Klodpfxjxiv Dhj Ah Nel Saw blade diameter: 500 mm 2-axis scoring unit Table extension: 840 mm Angle-mitre fence Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Pressure 10 bar Voltage 380 v HP 15 Ksdpfx Ahjv S Iz Ue Noll kW 11

Condition: excellent (used), Joystickbox for Mitutoyo CMM with CMMC 1, 1S, 2; 2S; 3; 3S; 6 and UC200/400 Kledegynw Dopfx Ah Njl