Strand Pelletizer

AGRIFON-SHJ SG-150

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Cedpfx Abjtyyn Ho Tjhf

Condition: excellent (used), Angel Victory 1350/220 Tech Closing 220 tons year 2004 Clamping plan WxH 860x830 Scrow 55mm 618 cm3 Cc 200 Minimum mold height Chjdpfx Ajpdrpzsb Tsf 250mm Maximum 730mm

Year of construction: 1979, condition: good (used), 1 x 90 m³ aluminum silo with extended base ring and filter housing, ø 3,000 mm. Designed for a specific gravity of 0.6 kg/dm³ (formerly used as a flour and starch silo). Manufacturer: Zeppelin Capacity: approx. 90,000 liters Diameter: approx. 3,000 mm Total height: approx. 15,950 mm + 1,200 mm guard rail Weight: approx. 4,000 kg Specific gravity: 0.6 kg/dm³ Material: Aluminum AlMg3 Food grade: yes Insulation: approx. 100 mm mineral wool with bolted cover sheet (cover sheet partially damaged, but can be repaired by us). Connections and fittings: On the silo roof: - 1 x circumferential roof guard rail (ø 1,800 x 1,200 mm) with two access openings - 1 x hinged manhole with protective grid DN 600 - 1 x access ladder to filter housing - 2 x crane lugs In the filter housing: Csdpfxjgig D Do Ab Tjhf - 1 x flange DN 100 for filling line - 4 x vent openings DN 600 with filter bags - 3 x connection ports for control/measurement technology On the silo shell: - 1 x ventilation grid (filter housing) - 1 x filling line - 1 x personnel door (approx. 1,850 x 800 mm) The silo terminates in a 60° cone NW 1500 with inspection opening. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo is not equipped with rupture discs or explosion protection devices. For further details, please refer to the technical drawings and images.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We are selling an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 benchtop model Config: E1-F1-G1 50KN Year of manufacture: 2022 Weight: 151Kg Load transducer: 50KN 2530-50kN/165541 Load transducer: 5kN 2530-5kN/166885 Last service and calibration August 2024 Next service and calibration August 2026 The 3400 Series universal testing machines cover a test force range from 500 N to 300 kN. Featuring the patent-pending Instron operator protection architecture, the 3400 Series testing machines are easier to use, smarter, and safer than ever before. The testing systems are suitable for performing tensile, compression, bending, peeling, puncture, friction, shear, and numerous other tests and can be used with a wide range of clamping devices and testing fixtures from our extensive accessories catalog. Total height: 1604mm Maximum vertical test space (daylight test - from base to bottom of crosshead): 1198mm Test type: Tension, compression, and zero-crossover operation Basic control mode: Displacement control Load capacity - kN (lbf): 50 (11240) Maximum speed - mm/min (in/min): 508 (20) Minimum speed - mm/min (in/min): 0.05 (0.002) Maximum force at maximum speed - kN (lbf): 25 (5620) Maximum speed at maximum force - mm/min (in/min): 254 (10) Return speed - mm/min (in/min): 508 (20) Cedpfx Aewz Iktjb Tohf Crosshead speed accuracy: ± 0.2% of the set speed at a steady rate and without Load Travel (Crosshead Position) Display Accuracy: In no-load condition, ±0.02 mm (0.0008 in) or ±0.10% of the displayed reading, whichever is greater. Travel (Crosshead Position) Repeatability - mm (in): ±0.015 (0.0006) Load measurement accuracy: ±0.5% of the reading up to 1/200 of the force transducer's rated force. Strain measurement accuracy: ±0.5% of the displayed reading up to 2% of the full scale value, with an ASTM E83 Class B or ISO 9513 Class 0.5 strain transducer.

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. Chjdpfx Aeumubyjb Tjf The system can be viewed during operation. A new extruder screw was installed in February.

Year of construction: 1986, condition: good (used), machine/vehicle number: 2057, Hosokawa Alpine ZPS 315 classifier mill Universally applicable for materials up to a Mohs hardness of approx. 3.5 with requirements for very high final fineness with the lowest possible energy input. Classifier mill for high finenesses, cool grinding and flexible production parameters in the fineness range from less than 5 µm to 200 µm Impact beater mill with Turboplex classifier integrated in the upper section for precise particle size limitation Chodpfx Abjqi Hhpj Tef Welded construction, grinding tools made of special steel The mill is available complete with accessories, such as: suction filter, rotary valves, cyclone, filter, fan, piping, control cabinet

Year of construction: 2023, condition: as good as new (ex-display), Up-stroke construction pressing force 300 kN pressing surface 300 x 300 mm Csdpfx Aekuz T Ujb Tehf specific force 3,3 N/mm² opening 200 mm heating platen as solid steel plate electrical heated up to 300°C (570 °F) control Siemens S7-1200 with 12" Touchpanel mechanical safety door data collection

Condition: new, empty load weight: 104 kg, maximum load weight: 646 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,526 mm, loading space width: 1,116 mm, loading space height: 777 mm, loading space volume: 1.8 m³, tire size: 13, wheelbase: 155 mm, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004173 Low loader Garden Trailer 150 with high frame and high tarpaulin for cars, 150 x 106, 750kg The low loader with high frame and high tarpaulin that you can connect to any car with a class B driving license. The low-loader has a tiltable drawbar, which makes it easier to load and unload transported goods, especially bulk goods. The compact size of the loading area of 150x106 cm makes maneuvering with the low-loader attached to the hook child's play. Larger purchases, new furniture or household appliances or consumer electronics will not be a challenge for you if you have a low-loader. When you buy a low-loader with high frame and high tarpaulin from UNITRAILER, you get the following: * Fully folding drawbar to place on the rear dropside in a low garage or under the house * Vehicle with very comfortable loading and unloading of goods, which is possible by tilting the loading area Chodpfxjir H Sbe Ab Tof * ZGG documents adapted to your vehicle * simple and easy registration procedure thanks to all required documents - invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate * Optional extras - jockey wheel, additional drop sides, anti-theft device * Support from our experts, who will be happy to answer any questions you may have. Options for the Garden Trailer 150 low loader: * Storage on the rear dropside - the low loader in a vertical position takes up very little space, and the broken drawbar means it does not require a high ceiling * High tarpaulin with 80 cm high bows - protect the load from rain, snow, wind and sun and ensure safety in all seasons * Plastic mudguards - very high durability without corrosion * GVW values up to 750 kg - loading area of the low loader with compact dimensions * Corrosion resistance - made of galvanized sheet steel ensures long-term corrosion resistance of all metal elements used in the low-loader * Transport independence - you can carry it what you want and where you want without having to use a car rental or destroy your car Delivery costs are charged additionally.

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm Chsdpfxswg Hrgs Ab Tef 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Chip coveyor Ink. Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Cjdpeiyyf Isfx Ab Tjhf Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.