Balancing Machine

CIMAT

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Cedpfx Abottg S Uj Tshf Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm Chodpfod N Smhex Ab Tjf tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2026 - 60 kN - New Machine - BROACHING MACHINES MADE IN GERMANY ==> New machines ordered this year currently available on special terms! ==> A fully refurbished used machine will soon be available as well. Please inquire separately. ==> ==> Information for manufacturing companies and dealers with in-house production: Drawings, rights, spare parts, customer and prospective buyer data, as well as planning and production documentation for the broaching machine (including plans for a 9-ton pulling force variant) can be acquired from us, if desired. Please contact us if interested. ==> Our new machines are custom-built to order. Short-term manufacturing and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for long-term use. Broaching tools (including special broaches for internal splines, etc.) and accessories available on request. Please inquire separately. All broaching tools and tool holders from other manufacturers may be used on our broaching machine! Complete manufacturing and assembly at our factory in Germany. Short-term delivery available by arrangement. Additionally, we offer spare and wear parts (spindles, spindle nuts, motors, gears, as well as all other required components including electrical parts) for both Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2026 - NEW MACHINE: Chsdpsuqbnhsfx Ab Tef The primary application is the production of keyways from 3-28 mm and profiles of similar dimensions. Due to its compact and space-saving design, the machine is suitable for successful use in small, medium, and large workshops. The low purchase price justifies investment even for small batch series and custom production. Drive is via a pole-changeable geared brake motor. The maintenance-free dual-spindle drive ensures smooth operation and a central pulling point with constant cutting force. The open tool table allows even large workpieces to be accommodated without restriction. In most cases, workpieces do not need to be clamped securely. Stroke adjustment is by adjustable end switches with stroke limitation. For short hubs/workpieces, several parts can be stacked. Broaching needles, mandrels, and spare parts available at attractive conditions upon request. Technical Data: Pulling force: 60 kN at 3m/min, 40 kN at 6m/min. Broaching speed: 3m/min & 6m/min (Optional: stepless speed control from 0 m/min to 6m/min available with advanced electronics) Return speed: 6m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Worktable: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Total machine height: 1510 mm Motor power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Finish: Exterior RAL 7035/7036/7016, interior RAL 3000 or custom Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and carries CE certification.

Condition: good (used), Spectro CIROS CCD Water Analyser - height: 105cm - width: 150cm - depth: 75cm Good condition fully functional can be inspected and tested on site. Cjdpfx Abjfiqn Uo Tshf Shipping also abroad. Inspection : Basically I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please ask questions before purchase to avoid any ambiguity. If you have general questions or would like to make an appointment for a viewing, I can be reached at any time at the telephone number below. Errors in the description and prior sale reserved. The value added tax is shown separately on my invoices. Dispatch with forwarding agent.

Condition: used, machine/vehicle number: 149774, for screws: M 8 - M 16 max. tightening torque: 140 Nm Tool holder, square: 1/2" Csdpfx Abjby Np Eo Tohf electrical connection: 220 V, 280 W weight: 3,3 kg

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Codpfxehcnxrj Ab Tjhf Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 03.2133, Arthur Klink - internal broaching machine (KOM 138) Chedpod Nb A Nsfx Ab Tof machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 16 x1250 x400 built in: 1983 stroke: 1250mm pulling force: 16.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: in an excellent condition, ready to use, perfect slides Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 2020, condition: ready for operation (used), Movement X-Axis Movement 350 Y-Axis Movement 250 Z-Axis Movement 250 This 5-axis +GF+ Agie Charmilles CUT E 350 was manufactured in 2020, featuring a work area of 820 × 680 × 250 mm and a maximum workpiece weight of 400 kg. It supports a cutting speed of 0 – 3 m/min and includes an Integrated Collision Protection System. If you are looking to get high quality wire EDM capabilities consider the +GF+ Agie Charmilles CUT E 350 machine we have for sale. Contact us for more information. Codowmg T Rjpfx Ab Tehf Application Types EDM

Year of construction: 1999, condition: good (used), KRONEN K 50-4 ID.NO. 2834 Kronen salad centrifuge mod K-50-4 for drying Vegetables, Fruit, salads etc. capacity up to 1200 kg / Hour depending on the product. Dimensions 85 x 60 cm Height 100 cm. Cedpfx Asu Iv Avob Tohf

Condition: used, Year of construction: 1982, workpiece weight 60 kg workpiece length 700 mm diameter 500 mm Csdpet Hxbqofx Ab Tehf total power requirement kW weight of the machine ca. t dimensions of the machine ca. m