Condition: new, Year of construction: 2021, operating hours: 4 h, functionality: fully functional, machine/vehicle number: ZSS8501604002, overall weight: 4,290 kg, rotor diameter: 387 mm, number of blades: 40, rotor length: 850 mm, rotor width: 457 mm, power: 40.75 kW (55.40 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, rotational speed (min.): 74 rpm, year of last overhaul: 2025, sieve perforation: 60 mm, warranty duration: 6 months, input voltage: 400 V, Single-rotor shredder ZERMA ZSS 850-E 37 kW Iiodpfsxtp Diox Adrok Hopper opening (mm): 1340 x 840 mm Usable cutting chamber: 690 x 730 mm Rotor diameter x width (mm): Ø 387 x 850 mm Rotor speed: 80 rpm Rotor model: E SEW oil-bath gearbox: Included Number and size of knives: 40 / 34x34x22 mm Knife holders with bolts: Included Number of counter-knives: 1 row of 3 IE3 motor power: 37 kW Screen perforations: > 40mm (to be specified) Hydraulic screen opening: Included Discharge height: 560 mm Connected electrical power: 400 V +/- 5% / 50 Hz Hydraulic pusher power: 3.6 kW Hydraulic pusher with 2 speeds: Included Adherent front plate (ram): Included Air/Oil heat exchanger mounted on hydraulic tank Overall length: 2085 mm - Overall width: 1940 mm - Height: 2435 mm Approximate weight (kg): 4400 kg Control cabinet with SIEMENS PLC and settings menus such as: Recipes, Maintenance, Alarms, etc. Cable length to control cabinet: 5 meters See technical datasheet and/or attached diagram for more details.

Condition: excellent (used), Shredding of tires, cables, wood, metal Iisdpfx Adov Htr Uerek

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system Iedpfx Ajxrtt Esdroik 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: new, Year of construction: 2025, Arjes IMPAKTOR 250 e-EVO II (Electric) Stationary, fully electric, Twin Shaft Shredder Year: 2025 Hours: NEW 1x Set of shafts (choice available, various types depending on application*) 1x Set of breaking bars or breaker basket for concrete, wood, or cable 1x quick-change cassette, for fast shaft change 1x remote control Discharge belt and overband magnet available on request Includes frequency converter. Guarantees an extremely energy-efficient shredding process. Electric Motor – 160kW Gearbox: Bonfiglioli Shredding unit: Length (mm) 3,300 Width (mm) 2,300 Height (mm) 3,200 Ijdpfjt Urq Uex Adreik Control unit Length (mm) 2,600 Width (mm) 1,600 Height (mm) 2,700 Weight (kg) approx. 15,000 kg Shredding Unit Hopper volume (m³) 2.25 Shaft length (mm) 1,500 Rotation speed (rpm) 11–35 Throughput performance: average values without guarantee! The actual values depend on the equipment of the shredder, the shaft configuration, the position of the counter rakes and the optimal material feed. Construction waste ⌀ 80–100 t/h Concrete / Asphalt ⌀ 60–80 t/h Waste wood ⌀ 10 t/h Biomass ⌀ 20 t/h Waste & Plastics ⌀ 10–15 t/h * You can choose between these shafts: - Star shafts 9x4 or 9x6 (Household waste, waste wood, plastic, tires, e-scrap) - Concrete shafts (Concrete, stone, construction waste, asphalt, e-scrap) - Paddle shafts (Wood, waste wood, green waste) - Metal shafts (Home appliances, e-scrap, aluminum (up to 3mm))

Condition: good (used), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 390, total length: 11,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 35,000 kg, hopper volume: 5 l, rotor diameter: 860 mm, rotational speed (max.): 45 rpm, power: 404.52 kW (549.99 HP), Equipment: rotational speed infinitely variable, Arjes Titan 900 Demo machine Year of manufacture: 2025 Hours: 380 Equipped with paddle rotors and/or star rotors Also standard equipped with: - Magnet - Reversible fan Isdpfx Adsxraigsroik - Remote control

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Single-shaft shredder with electrohydraulic drive Iiodpfx Ajq I Rkdodrok Rotor width: 2500 mm Rotor diameter: approx. 500 mm Electric motor: 250 kW

Condition: excellent (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, conveyor belt length: 7,000 mm, conveyor belt speed: 50 mm/s, conveyor belt width: 1,000 mm, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours! TECHNICAL DETAILS Shredding system Type: Size L Number of roller teeth: 20 Feed hopper Loading height: 3,650 mm Feed width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Conveyor speed: 1.25 – 3.0 m/s Ijdpfexln Rlox Adroik MACHINE DETAILS Transport dimensions (L x W x H): 9,141 mm x 2,540 mm x 3,604 mm Permissible total weight: 25,000 kg Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: STAGE V Fuel tank capacity: 500 l Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Longitudinal conveyor (conveyor length: 2,900 mm, conveyor width: 800 mm) Centrally arranged lubrication bars 24 V electric control system Full radio remote control Large side maintenance doors (GRP) Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive Hopper extension 350 mm, bilateral water spray Overband magnet (neodymium) Frame for 7 m overband magnet

Condition: new, M&S Gruseck GmbH NEW screening baskets from the specialist – 100% MADE IN GERMANY! Screening baskets suitable for the Doppstadt AK series 430, 435, 510, 535, 560, 635, 640, etc. Isdpsxp Nzmsfx Adreik - TOP QUALITY - Various perforations - Short delivery times Many other spare parts also available from stock: - Rear screens - Tailgates - Various impact plates - Wear plates - Scraper floor rails - Hammers - Hammer holders - ... AND MUCH MORE!

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Iedpfx Adoxp Nm Neroik Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Shredder located in Carlisle.

Condition: excellent (used), Year of construction: 2025, operating hours: 500 h, Eggersmann “Teuton Z 50” Mobile Single-Shaft Shredder Year of manufacture: 2025 Operating hours: 500–1000 Extended warranty available Engine: Diesel, 6-cylinder Output HP/kW: 500/373 Shredding shaft length x diameter Ø: 3,000 mm x 1,050 mm Rotor speed (rpm): 20–40 Bolted tools Tool-free cutting gap adjustment in six steps Extra-large feed area, 5 m wide Rear discharge conveyor Reversing rotor Operating position: Length (mm): 15,864 Width (mm): 2,540 Loading edge (mm): 3,000 Discharge height (mm): 5,000 Transport dimensions Length (mm): 8,976 Width (mm): 2,540 Height (mm): 3,652 Weight (kg): 25,000 VARIOUS OPTIONS AVAILABLE ON REQUEST Screen basket systems: Strip and honeycomb screen baskets in various versions Rotor tools: Multigrip – Unigrip – Twincut – Rootgrip Ijdpfjxqxbxox Adrsik Overbelt magnet: Extra-strong neodymium version, hydraulically height-adjustable, material discharge on both sides possible Ecospray moisture system and much more…

Condition: as good as new (ex-display), Intake opening: 1200 x 1600 mm Motor power: 55 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 56 cutting inserts 60x60x30 mm on toolholders Screen perforation: Ø 40 mm Counter knife: with cutting gap adjustment Machine weight: approx. 7.000 kg Machine number: A 21 Iiedpfx Adscbnigsrek

Condition: used, Year of manufacture 2003 2.2 kW Isdpfx Asw Upn Ejdrsik 3.0 HP including documentation, COC

Condition: good (used), -1Pc. Metso M&J 4000-8 Shredder . With Hydraulic power-unit and control-panel in container. Ijdpfx Adjxhlfrsroik With conveyor for output material and inlet hopper.

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm Rotor blade: 66 Isdpowbwuhefx Adroik Stator knives: 1 row Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Rotor length: 1000 mm Rotor diameter: 380 mm Ijdpfoxgfwxjx Adreik Main motor: 18.5 kW Automatic waste feeding

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,800 kg, power: 22 kW (29.91 HP), Technical data: Power: 22 kW Iijdpfxjxnznvo Adrjk Blades: 29 pieces Dimensions: 1800 × 1840 × 1000 mm Weight: approx. 1,800 kg Condition: New and unused On pallet, immediately available for delivery or collection Location: 86554 Pöttmes

Condition: used, Intake opening: 800 x 1000 mm Motor power: 18,5 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 rpm Cutting system: cutting inserts Screen: reinforced with ribs Connecting piece: sideway Ijdpfx Adecayzqjreik Machine weight: approx. 1.950 kg Machine number: A 33

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: W09368333J2D38007, conveyor belt length: 8,500 mm, conveyor belt speed: 2,000 mm/s, conveyor belt width: 1,200 mm, roller length: 3,000 mm, number of rollers: 1, TECHNICAL DETAILS Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Roller Number of Rollers: 1 Roller Length: 3,000 mm Maximum Roller Speed: 32 rpm Permissible Gross Weight: 33,000 kg MACHINE DETAILS Dimensions & Weight Operating Dimensions (L x W x H): 16,786 x 2,500 x 5,050 mm Transport Dimensions (L x W x H): 9,971 x 2,500 x 3,893 mm Total Weight: 32,000 kg Drive Engine Type: Diesel engine Brand: MTU 6R 1300 Emissions Standard: Stage V Rated Power: 390 kW / 530 HP Tank Capacity: 950 l Iijdjxny E Hepfx Adrjk Operating Hours: 5,000 h EQUIPMENT Overband Magnet

Condition: used, functionality: fully functional, rotor diameter: 194 mm, number of blades: 23, type of input current: three-phase, rotational speed (max.): 975 rpm, rotational speed (min.): 975 rpm, rotor flight circle: 610 mm, working width: 500 mm, funnel diameter: 740 mm, sieve perforation: 25 mm, Wood Chipper / Shredder NAZZARENO K700 Industrial machine designed for shredding wooden elements, carpentry waste, battens, and wood blocks. Manufactured by Costruzioni Nazzareno (Italy) – robust, industrial build offering high reliability. Iiodpfx Aoxnxr Esdrsk

Condition: reconditioned (used), Year of construction: 2008, power: 250 kW (339.91 HP), Mobile shredder ARJES VZ 750 E Electric drive: 250 kW Iodpfx Aoxf Aqtodreik Discharge conveyor Overband magnet

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Iodpfx Adjbq Stqoreik Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg

Condition: used, Inlet cross section: 420 x 750 mm drive: 11 kW rotor flight circle: 250 mm rotor speed: approx. 140 rpm Iodsbpgu Hspfx Adrjik Rotor design: 10 single teeth Screen design: solid screen basket, reinforced with ribs hopper: 1.050 mm high, without lid Suction nozzle: 200 mm diameter, at the front machine weight: approx. 900 kg

Condition: good (used), Intake opening: 1.000 x 1.200 mm Motor power: 37 kW Rotor flight circle: 450 mm Iiedpfx Adobyiq Iorsk Rotor speed: approx. 86 rpm Cutting system: 51 cutting inserts Screen: quick-change-device, Ø 80mm Machine weight: approx. 3.500 kg

Condition: as good as new (ex-display), Intake opening: 2000 x 1900 mm Iisdjcb Dttspfx Adrjk Motor power: 2 x 75 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 152 cutting inserts 40x40x20 mm on toolholders Screen perforation: with this Screen perforation is for achieving the security levels P2 to P5 Counter knife: with cutting gap adjustment Machine weight: approx. 21.000 kg Machine number: A 32

Condition: used, Inlet cross section: 5,000 x 3,500 mm Drive: 2 x 110 kW Hydraulic power unit slider: 22 kW rotor flight circle: 635 mm Iijdpfx Adsbq Stwerek Rotor design: 244 pcs. inserts on tool holders Screen design: solid screen basket, reinforced with ribs, hydraulically swivelling away hopper volume: approx. 40 m³ machine weight: approx. 55 t