Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, type of cooling: water, input voltage: 400 V, Equipment: cooling unit, type plate available, This single-stage absorption chiller is in perfect condition and ready for operation. It runs on hot water and uses Advaguard as the working fluid. Available in two configurations: with the installation container or without it. Power: 1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C Year of Manufacture: 2008 Bwodeytyiwspfx Ab Isk Frequency: 50 Hz Voltage: 400 V Working Fluid: Advaguard

Condition: like new (used), Year of construction: 2023, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 375 kg, input voltage: 400 V, total width: 760 mm, total length: 1,870 mm, total height: 1,450 mm, warranty duration: 6 months, Aircooled chiller MTA TAEevo Tech 081 22 kW Cooling capacity: 22 kW / 6.26 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 2 pcs (centrifugal) Hydraulic module: 1 pcs. water pump Lowara CIE120/5/D Dimensions: 1.87x0.76x1.45 m. Weight: 375 kg. Working hours: 1110 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS Bwjdpfjwwtqwjx Ab Iok The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 26.3 kW (35.76 HP), type of input current: three-phase, type of cooling: air, overall weight: 270 kg, input voltage: 400 V, total width: 750 mm, total length: 1,750 mm, total height: 1,450 mm, warranty duration: 6 months, Aircooled chiller AERMEC ANL102 Z 26.3 kW Cooling capacity: 26.3 kW / 7.48 tons (12/7 — 35°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. PANASONIC C-SBP160H38B (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Dimensions: 1.75x0.75x1.45 m. Weight: 270 kg. Working hours: 8000/8000 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup Bwodpow Ra Rvefx Ab Isk After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 20.35 kW (27.67 HP), type of input current: three-phase, type of cooling: air, overall weight: 120 kg, input voltage: 400 V, total width: 550 mm, total length: 1,120 mm, total height: 1,250 mm, warranty duration: 6 months, Aircooled chiller AERMEC ANL080 Y 20.35 kW Cooling capacity: 20.35 kW / 5.79 tons (12/7 — 35°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. COPELAND ZH19K1P-TFW-524 (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Dimensions: 1.12x0.55x1.25 m. Weight: 120 kg. Working hours: 7000 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Bodpfx Absw Rvczs Ijwk By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Two-side evaporator Goedhart -Type: FC38Dp 453-7-230 -Cooling capacity: 25 kW at DT8 -Fin spinning: 7 mm -Fans: 3 x 450 mmm Bwjdpfx Abeyttc De Iek -Dimensions: 2850 x 1050 x 470 mm -Place for electric defrost -Volume: 32 L -Weight: 260 kg -Refrigeration: Freon -Quantity in stock: 7 -Reference number: CH 596 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 1,736 kW (2,360.30 HP), type of input current: three-phase, type of cooling: water, overall weight: 9,850 kg, input voltage: 400 V, total width: 2,130 mm, total length: 4,830 mm, total height: 1,600 mm, warranty duration: 6 months, heating capacity: 1,964 kW (2,670.29 HP), Watercooled chiller/Heat pump CIAT LWHE 4628E0003- 1736 kW/ 1964 kW Cooling capacity: 1736 kW / 493.62 tons (12/7 — 30/35°C) Heating capacity: 1964 kW / 558.45 tons (40/45 —10/7°C) Year of manufacture: 2021 Options: Economizer. High efficiency. Heat pump. Bedpfxswy Nnko Ab Iowk Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Compressors: 2 pcs. Carlyle 06TVW819SW3D.A42 (screw compressor with stepless control between 15% and 100%) Type of refrigerant: R134a Dimensions: 4.83x2.13x1.6 m. Weight: 9850 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2022, For sale: industrial chiller unit from the reputable manufacturer HYFRA, designed for cooling water or process fluids in industrial installations. The unit is in very good visual condition and was manufactured in 2022. It has been professionally dismantled, is complete, and ready for recommissioning after connection. Technical data (from the nameplate): • Model: SIGMA7-S-P • Cooling capacity: 6.9 kW (conditions: 32°C / 20°C) • Year of manufacture: 2022 • Refrigerant: R410A (GWP 2088) • Refrigerant quantity: 1.0 kg (CO₂ eq. 2.1 t) • Power supply: 3 / PE, 380–415 V ±10%, 50 Hz • Rated current: 8.20 A • Rated power: 4.70 kW • Max. ambient temperature: +42°C • Max. pressure (HP): 42 bar Bodpfxsyc H Iro Ab Iewk • Protection: 16 A • Weight: - dry: approx. 180 kg - filled with water: approx. 300 kg Features / equipment: • Integrated air-cooled condenser • Comprehensive safeguards (pressure, flow, temperature, antifreeze protection) • Clear error code list on housing • Robust, industrial-grade construction • Connection stubs – visible in the photos • European manufacture, CE certification Applications: • CNC machines • Injection molding machines, extruders • Production lines • Process cooling • Plastics, metal, chemical industries

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good Bodpfewp Dq Sox Ab Ijwk CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 217 kW (295.04 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,590 kg, input voltage: 400 V, total width: 2,200 mm, total length: 2,780 mm, total height: 2,450 mm, warranty duration: 6 months, Aircooled chiller AERMEC NRB0800 L 217 KW Cooling capacity: 217 kW / 61.7 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. COPELAND ZP235KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 4 pcs. (EC-fan) Hydraulic module: 2 pcs. water pump LOWARA PLM112RB14S2/340 E3, 2 pcs. expansion vessel, buffer tank. Dimensions: 2.78x2.2x2.45 m. Weight: 3590 kg. Working hours: 0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS Bodpfxexq A Dds Ab Ijwk - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 100 kW (135.96 HP), type of input current: three-phase, type of cooling: air, overall weight: 775 kg, input voltage: 400 V, total width: 2,300 mm, total length: 2,100 mm, total height: 1,350 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RB100R 100 kW Cooling capacity: 100 kW / 28.43 tons (12/7 — 35°C) Year of manufacture: 2021 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 3 pcs. Danfoss DSF155A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. Dimensions: 2.1x2.3x1.35 m. Weight: 775 kg. Working hours: 0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS Bwedpew Rbqwsfx Ab Ijk - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 93.4 kW (126.99 HP), type of input current: three-phase, type of cooling: air, overall weight: 700 kg, input voltage: 400 V, total width: 2,100 mm, total length: 2,300 mm, total height: 1,300 mm, warranty duration: 6 months, AIRCOOLED CHILLER CARRIER 30RB090R 93.4 kW Bedpfx Abou Nghfs Iowk Cooling capacity 93.4 kW / 26.5 tons (12/7 — 35°C) Year of manufacture 2021 Refrigerant circuit 1 pcs. Heat exchanger Plate Condenser Microchannel, Aluminum Type of refrigerant R32 Compressors 2 pcs. Danfoss DSF200A4ACA (scroll) Number of fans 2 pcs. Dimensions 2,3х2,1х1,3 m. Weight 700 kg. Working hours 0/0 h. Condition New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 26 kW (35.35 HP), type of input current: three-phase, type of cooling: air, overall weight: 358 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,300 mm, total height: 1,600 mm, warranty duration: 6 months, heating capacity: 30 kW (40.79 HP), Aircooled Chiller/Heat pump Blue Box Epsilon Echos DK RF HP 26 kW Cooling capacity: 26 kW (12/7 — 35°C) Heating capacity: 30 kW (40/45 — 7°C) Year of manufacture: 2018 Options: Heat pump Heat exchanger: Plate Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Copeland (scroll) Number of fans: 1 pcs. high-pressure Dimensions: 1.30 x 1.15 x 1.60 m Weight: 358 kg Working hours: 3 h Condition: Excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Bsdpjx Ux T Sofx Ab Iswk The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2017, functionality: fully functional, cooling capacity: 16 kW (21.75 HP), type of input current: three-phase, type of cooling: air, overall weight: 227 kg, input voltage: 400 V, total width: 700 mm, total length: 1,100 mm, total height: 1,400 mm, warranty duration: 6 months, heating capacity: 18 kW (24.47 HP), Aircooled chiller/heat pump Blue Box Epsilon Echos 16 kW / 18 kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new CONDITION, TESTING & READINESS Bjdox Uyf Aepfx Ab Ijwk The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 396 kW (538.41 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,740 kg, input voltage: 400 V, total width: 890 mm, total length: 2,650 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 439 kW (596.87 HP), Watercooled chiller/Heat pump Climaveneta Prototipo PDC NX WN 1204 396 kW/439 kW Cooling capacity: 396 kW / 112.6 tons (12/7 — 35°C) Heating capacity: 439 kW / 124.8 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Bwedpjwbd Tdofx Ab Iek Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZP385KCE-TWD-522 (scroll) Type of refrigerant: R410a Dimensions: 2.65x0.89x1.8 m Weight: 1740 kg Working hours: 146/86/136/81 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 700.2 kW (952.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 7,460 kg, input voltage: 400 V, total width: 2,260 mm, total length: 7,900 mm, total height: 2,530 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA I-FX(1+I) CA 2722 700.2 kW Cooling capacity: 700.2 kW / 199.1 tons (12/7 — 35°C) Year of manufacture: 2021 Options: Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 1 pcs. BITZER CSCVH26-200Y-40A (inverter, screw) + 1 pcs. BITZER CSC8593-140Y-40D (screw) Type of refrigerant: R134A Number of fans: 20 pcs. ZIEHL-ABEGG FN080-ZIA.GG.V7P3 Dimensions: 7.9x2.26x2.53 m Weight: 7460 kg. Working hours: 0/0 h. Condition: Outlet. There are traces of hail (does not affect performance) Bsdpfswlnl Ejx Ab Ijwk CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 27.2 kW (36.98 HP), type of input current: three-phase, type of cooling: air, overall weight: 550 kg, input voltage: 400 V, total width: 860 mm, total length: 1,670 mm, total height: 1,800 mm, warranty duration: 6 months, Aircooled chiller TECHNOTRANS OMEGA K 340L 27.2 KW Bwsdpfx Abjxyw Ipo Ijk Cooling capacity: 27.2 kW / 7.73 tons (14/19 — 32°C) Year of manufacture: 2025 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Panasonic C-SCN903H8K (scroll) Type of refrigerant: R513а Number of fans: 1 pcs. + 1 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos CM10-3 A-R-I-V-AQQV J-A-A-N, buffer tank. Dimensions: 1.67x0.86x1.8 m. Weight: 550 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 221.1 kW (300.61 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,000 mm, total height: 1,700 mm, warranty duration: 6 months, Watercooled chiller Climaveneta FX W 0951 221.1 kW Cooling capacity: 221.1 kW / 62.87 tons (12/7 — 35°C) Year of manufacture: 2018 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Bitzer CSH7593-110Y-40P (screw) Type of refrigerant: R134A Bwedpfx Ajv Ux Rleb Isk Dimensions: 3x1.2x1.7 m. Weight: 2000 kg. Working hours: 33 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Trane Model: CGAM046E1C02B4D102A102AXXB1B2E1AXA5AXA1A Trane CGAM 046 – Air-Cooled Scroll Chiller 126 kW – 400V For sale is a compact air-cooled chiller Trane CGAM 046. This unit is suitable for comfort air conditioning as well as commercial and industrial process cooling. What does the unit do? The chiller produces chilled water for supplying: - Air conditioning systems in office and commercial buildings - Production and machinery cooling - Industrial and workshop cooling processes - Server and technical rooms The heat is dissipated directly to the ambient air via integrated axial fans. Equipped with scroll compressors, the unit delivers reliable, robust performance with excellent part-load efficiency. Ideal for outdoor installation. Technical data: Model: Trane CGAM 046 Version: Standard Efficiency Compact Cooling capacity (net): approx. 126.6 kW Power consumption: approx. 45.2 kW EER: 2.8 ESEER: 3.4 Number of refrigeration circuits: 2 Number of compressors: 4 scroll compressors Electrical data: Power supply: 400 V / 3 Ph / 50 Hz Max. current draw: approx. 105.5 A Starting current: approx. 238 A Noise data Sound power: 92 dB(A) Sound pressure at 10 m: approx. 59 dB(A) Dimensions & weight: Length: approx. 2,905 mm Width: approx. 2,266 mm Height: approx. 2,150 mm Operating weight: approx. 1,526 kg Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, please do not hesitate to contact us by phone. Bwedpfx Ajynf Ineb Ijk

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 159.7 kW (217.13 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,960 kg, input voltage: 400 V, total width: 2,220 mm, total length: 3,110 mm, total height: 2,150 mm, warranty duration: 6 months, heating capacity: 178 kW (242.01 HP), Aircooled chiller/Heat pump CLIMAVENETA NECS NR SL S 0704 159.7 kW/178 kW Cooling capacity: 159.7 kW / 45.41 tons (12/7 — 35°C) Heating capacity: 178 kW / 50.61 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP233KZE-TED-456 (scroll) + 2 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. Dimensions: 3.11x2.22x2.15 m. Weight: 1960 kg. Working hours: 0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Bwedpfx Aexpv Dbsb Iek By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 123 kW (167.23 HP), type of input current: three-phase, type of cooling: water, overall weight: 760 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,700 mm, total height: 2,000 mm, warranty duration: 6 months, heating capacity: 136.9 kW (186.13 HP), Watercooled chiller/Heat pump Climaveneta NX WN 0402 123 kW/136.9 kW Cooling capacity: 123 kW / 34.97 tons (12/7 — 35°C) Heating capacity: 136.9 kW / 38.93 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 1 pcs. Bitzer GSU80295VLB4-2 (scroll) + 1 pcs. Bitzer GSU60235VLB4-2 (scroll) Type of refrigerant: R410a Dimensions: 1.7x1x2 m Weight: 760 kg Working hours: 17/16 h. Bwjdpfsv Tyd Rox Ab Ijk Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 44.5 kW (60.50 HP), type of input current: three-phase, type of cooling: air, overall weight: 830 kg, input voltage: 400 V, total width: 1,150 mm, total length: 2,200 mm, total height: 1,500 mm, warranty duration: 6 months, heating capacity: 50.4 kW (68.52 HP), Aircooled chiller/Heat pump Climaveneta AWR HT D LN CA E 0152 44.5 kW/50.4 kW Cooling capacity: 44.5 kW / 12.65 tons (12/7 — 35°C) Heating capacity: 50.4 kW / 14.33 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Recuperation. Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZH24KVE-TWD-526 (scroll) Type of refrigerant: R407c Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump EBARA DWC-V/I 300/1.1-Q1AEGG Dimensions: 2.2x1.15x1.5 m Weight: 830 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Bjdjvrwv Ijpfx Ab Iswk

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 785 kW (1,067.30 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,190 kg, input voltage: 400 V, total width: 2,330 mm, total length: 8,500 mm, total height: 2,640 mm, warranty duration: 6 months, AIRCOOLED CHILLER EMICON ERAH 8120 MC VS HE KE 785 KW Cooling capacity: 785 kW / 223.2 tons (12/7 — 35°C) EER: 3.02 Refrigerant circuit: 2 pcs. Bodpsukg R Uefx Ab Iswk Heat exchanger: Shell-and-tube Bitzer SQDS4010214-CE Condenser: Microchannel Type of refrigerant: R513А Compressors: 2 pcs. Bitzer CSVH25-160Y-40A (Inverter screw) Number of fans: 14 psc. Dimensions: 8,5 х 2,33 х 2,64 m. Weight: 6190 kg. Working hours: 0/0 h. Condition: Never used, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Alternative names used in European markets: Kaltwassersatz (DE), Gruppo frigorifero industriale (IT), Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Enfriadora industrial (ES). This unit is listed in English for international buyers.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 24.7 kW (33.58 HP), type of input current: three-phase, type of cooling: air, overall weight: 265 kg, input voltage: 400 V, total width: 570 mm, total length: 1,450 mm, total height: 1,700 mm, warranty duration: 6 months, heating capacity: 26.1 kW (35.49 HP), Aircooled chiller/Heat pump CLIMAVENETA I BX N 025T HASNV 24.7 kW/26.1 kW Cooling capacity: 24.7 kW / 7.02 tons (12/7 — 35°C) Heating capacity: 26.1 kW / 7.42 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB52FFTMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10 (inverter), expansion vessel. Dimensions: 1.45x0.57x1.7 m. Weight: 265 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Bwjdsxwmg Aopfx Ab Iok Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 18.7 kW (25.42 HP), type of input current: three-phase, type of cooling: air, overall weight: 205 kg, input voltage: 400 V, total width: 570 mm, total length: 1,450 mm, total height: 1,200 mm, warranty duration: 6 months, heating capacity: 21.7 kW (29.50 HP), Aircooled chiller/Heat pump Climaveneta I-BX-N 020T HANNV 18.7 kW/21.7 kW Cooling capacity: 18.7 kW / 5.32 tons (12/7 — 35°C) Heating capacity: 21.7 kW / 6.17 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DNB36FAEMT (scroll, inverter) Type of refrigerant: R410а Number of fans: 1 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10, expansion vessel, buffer tank. Dimensions: 1.45x0.57x1.2 m Weight: 205 kg Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. Bwedpjxw U I Isfx Ab Iok LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 433 kg, input voltage: 400 V, total width: 860 mm, total length: 2,050 mm, total height: 1,660 mm, warranty duration: 6 months, heating capacity: 25 kW (33.99 HP), AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper-aluminum Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Bwodpfsvmzrisx Ab Iok WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.