Used low loader trailer / lowboy trailers for sale (323)

Condition: new, functionality: fully functional, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,067 mm, loading space height: 400 mm, total length: 2,910 mm, total width: 1,500 mm, total height: 900 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz HIT 200 Tipper NEW VEHICLE Internal dimensions: 201 cm x 106 cm Gross weight: 750 kg Payload: 622 kg Side wall height: 40 cm Unbraked single-axle low-bed trailer Removable side walls made of galvanized steel sheet Rear and front panels foldable and removable Easily convertible to a flatbed transport platform Bolted and galvanized steel frame Folding drawbar Phenolic plywood floor 13-pin electrical system Rear lights with reversing light, fog light, and triangular reflectors Plastic fenders Jockey wheel 13-inch M+S tires The trailer can be stored vertically on the rear panel when not in use Optional accessories: - 100 km/h upgrade - Rear support stands - Mesh sides - Side extension panels 40 cm - Aluminum lid with holder (e.g., for bicycle carriers) - Flat tarpaulin with or without bows - High tarpaulin 80 cm - Coarse or fine mesh net - Spare wheel with holder Hnedpfjy Dq Dhex Ag Isl - Loading ramps Additional accessories available on request! Images are for illustration purposes and may show optional equipment subject to extra charge. Plus vehicle registration documents and shipping to Gera €100 net Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get expert advice by phone, visit our website, or stop by in person.

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2010, loading space length: 6,000 mm, loading space width: 2,000 mm, loading space height: 600 mm, Very well-maintained Obermaier low-bed tandem trailer with a 6 m long loading platform and 2 wide loading ramps. The trailer is completely sandblasted and painted. Height-adjustable drawbar. Obermaier Tandem Low-bed Trailer - Length: 8,660 mm - Foldable wide loading ramps - Newly sandblasted and painted - 14 lashing points on the loading platform - Loading platform: 6,000 x 2,000 mm Hnjdpfjy Dnmtjx Ag Isl - Loading height: 600 mm - Height-adjustable drawbar - Rear support legs - Tyres: 335/75 R17.5 - Payload: 8,750 kg - Gross vehicle weight rating (GVWR): 11,900 kg - Unladen weight: 3,150 kg Financing through our partner banks is possible; we are happy to assist you. Please note that we reserve the right to prior sale, as this item is also listed on other platforms. Accessory specifications without guarantee. Subject to changes, prior sale, or errors. We offer and strongly recommend a viewing and inspection to avoid any misconceptions regarding the condition and suitability of the trailer. Viewings and inspections are possible by appointment at any time and are expressly encouraged.

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, suspension: steel, Year of construction: 2019, 40-ton low-loader with ramps – extensions – hooks for securing machinery – total weight 40,000 kg – unladen weight 8,200 kg – 1st to 2nd axle = 1,410 mm 2nd to 3rd axle = 4,530 mm 3rd to 4th axle = 1,410 mm = Further Information = Suspension: Leaf spring suspension Front axle 1: Steered Front axle 2: Steered Unladen weight: 8,200 kg Payload: 31,800 kg Gross vehicle weight: 40,000 kg Hsdpfjym Aluox Ag Ionl Reference number: 48 Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, axle configuration: 3 axles, first registration: 06/2010, total length: 9,500 mm, total width: 2,550 mm, total height: 940 mm, suspension: steel, color: other, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - BPW-Assen - Drum brakes = Remarks = Damm SL28M, 2010, BPW axles, Leaf-pinnate, Drum brakes, Charging ramp = More information = Hodpjy Awh Djfx Ag Ionl Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Rear axle 3: Double wheels Empty weight: 8.280 kg Carrying capacity: 21.720 kg GVW: 30.000 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Weights: * Gross vehicle weight (permissible): 24 t * Gross vehicle weight (technical): 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, beveled corners approx. 5,350 mm = lowbed platform – flat loading area approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling trains, the legally permissible overall height and total train length must be observed! Chassis: * Steel welded construction with front gooseneck and rear bevel * Ramp slope with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the lowbed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the lowbed, 1x on the ramp slope, 2x on the raised platform) * Standard ball-bearing turntable Chassis attachments: * Lowbed platform can be extended on both sides with approx. 50 mm softwood boards (track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) Hnodsy Aug Ropfx Ag Ijl * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform between the longitudinal beams, 1 pair at the very back in the bucket recess left and right, 1 pair at the front on the raised platform in front of the gooseneck between the longitudinal beams, 1 pair at the rear of the lowbed in front of the ramp slope in the bucket recess left and right Drawbar: * Fixed drawbar with swivel eye approx. 40 + 50 mm, cranked design, silent bushing mounting, drawbar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support system: * 2 automatic folding supports at the rear Axles: * SAF air suspension low-bed axles with drum brakes, axle load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand according to manufacturer’s selection Brake system/Suspension: * Brake system compliant with ECE regulation R13 * Dual-line compressed air brake system * Wabco make, EBS system 4S3M, sensors on 1st and 2nd axle * RSS/RSP – stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift and lower function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS Canbus signal for display in the cab (truck must be properly prepared; not a calibrated scale) * Tire pressure monitoring according to ECE regulation 141, with pressure sensor in the wheels, for display in cab (display must be present in tractor unit) Flooring: * Approx. 50 mm impregnated softwood floor, protruding approx. 5–10 mm above the top of the frame * Steel chequer plate cover above the wheels Ramps: * 2 foldable, single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with approx. 35 mm impregnated hardwood floor * Ramps adjustable

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available upon request. Chassis: * Steel welded construction with front neck, front corners chamfered and rear taper, drive-on ramp with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front neck slope, 3x in the low bed between the wheel recesses, and 1x in the entry ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located in front after the neck with one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN/piece * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle with one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with wheelbase approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 - 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer longitudinal beams) Chassis attachments: * 5 pairs of stake pockets in the outer frame for box section posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised platform) * Extensions with softwood planks approx. 50 mm, extendable on both sides of the low bed platform (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair front on the raised platform, inside the longitudinal beams, 1 pair fully at the rear in the excavator bucket recess left and right, 1 pair front on the raised platform before the neck, inside the longitudinal beams, 1 pair rear in the low bed before the drive-on slope, in the excavator bucket recess left and right Drawgear: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, with silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 hydraulic rear supports - operated individually, controls installed in separate stainless steel box underneath Axles: * SAF air-suspended low loader axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic slack adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity approx. 12 t / axle) Brake system/Suspension: * Brake system per ECE directive R13, dual-line pneumatic brake system * Brake system make Wabco EBS system 4S3M, 1st + 3rd axles with sensors * RSS/RSP – stability program Hodpfxoy Auhne Ag Ienl * Spring-actuated parking brake on 3rd + 4th axle * Aluminium air tanks for gross weight 44 t * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Tensioning rubber as holder for EBS and electrical plug * Air suspension with lift/lowering facility, operated separately front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above frame upper edge * Steel chequer plate cover over rear wheels

Condition: new, axle configuration: 2 axles, Year of construction: 2023, Brian James General Plant (3,500kg), new vehicle without initial registration, tiltable loading area, ideal for scissor lifts and warehouse equipment, year of manufacture: 2023, loading area dimensions: 3.10m x 1.70m, permissible total weight: 3,500kg, payload: 2,790kg, perforated steel loading ramp, spare wheel, immediately available. Price: €6,590.00 net / €7,842.10 gross Upon request, we can provide you with a leasing or financing offer. Mr. Ebert (Tel.) will be happy to assist you. Further information is available on our website. Subject to errors and prior sale! Hnedpsyfra Sefx Ag Ijl = Further information = Gross vehicle weight rating: 3,500 kg Contact Tobias Ebert for more information.

Condition: new, axle configuration: 2 axles, Equipment: ABS, Humbaur HBT 106224 BS Basic, tapered version Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm External dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Gross vehicle weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tyres: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3000 kg per lashing point; rings recessed in the platform floor 7 pairs of lashing rings, 1000 kg per lashing point; rings integrated in the external frame Standard equipment: Axles: Axles from renowned manufacturers Suspension: Low-maintenance parabolic suspension with load compensation Tyres: Manufacturer’s tyres of choice on steel rims Braking system: ABS braking system per ECE directive, with ALB function ABS plug connection ISO 7638 Spindle parking brake 2 interchangeable coupling heads (red/yellow) ISO 1728 Towing installation: Drawbar with DIN screw towing eye Ø 40 mm, galvanised, infinitely adjustable via crank Electrics: 24V lighting system with multifunction rear lights and LED side marker lights 15-pin connector for lighting Frame: Heavy-duty, welded and hot-dip galvanised frame Tapered rear end, 12° incline Floor: 40 mm softwood planks Side panels: Anodised aluminium side panels, laterally foldable and removable Corner stanchions, galvanised, insertable front and rear Ramps: 2 foldable steel ramps, one-piece, galvanised, laterally adjustable Ramp lifters: 1 gas strut per ramp Ramp lock at rear stanchion Ramp coating: galvanised grating Supports: Reinforced 12 t gearbox support winch with load and fast gear 2 telescopic folding supports at left and right rear of vehicle Features: Steel mudguards with antispray mats Side underrun protection up to the 1st axle, foldable Hjdpfx Agsyfvg Ae Ijnl 2 wheel chocks with holder Contour marking at side and rear Space for two-line licence plate on the left ramp A leasing or financing offer is available on request. Mr. Seidel (Tel.) will be happy to assist you. Further information is available on our homepage. ... Subject to errors, changes, and prior sale!!! = Additional information = GVW: 11,900 kg External dimensions: 0 x 2550 x 3260 Please contact Tobias Ebert for further information.

Condition: used, empty load weight: 6,900 kg, maximum load weight: 17,100 kg, first registration: 06/2010, next inspection (TÜV): 02/2025, total width: 25,500 mm, suspension: steel-air, tire size: 245 / 70 R 17.5 / 6mm, front tire size: 245 / 70 R 17.5 / 6mm, operation weight: 24,000 kg,

Condition: used, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, tire size: 235/75 r17,5, Year of construction: 2022, Further information Chassis central axle trailer low bed Welded fine-grained steel construction, front gear support foot, telescopic rear support, wheel chocks with bracket, sheet steel mudguards over both wheels Towing device central axle trailer Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brakes, laser-measured axle/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable, TTS bridge low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor, bridge length 5500 mm, trough at front and sides with load-lock profile for tensioning strap attachment (8 pieces at front, 16 pieces on each side) Note: Slight floor undulation possible due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. Pair of additional lashing eyes in the floor, 5 tons each Hedpfx Agsqmc Rae Ionl Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways, with handle on the ramps, covered with wood, with gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra approval and expert opinion (in accordance with §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, tire size: 235/75 r17,5, Year of construction: 2017, Further information Hnodsi Ri N Uspfx Ag Iel Chassis: Welded steel construction, double offset with drop deck in front of and behind axle unit, drop deck slanted towards entrance, turntable with strong ball bearing slewing ring, folding rear support, wheel chocks, side collision protection, quarter-shell mudguards Lashing eyes: above front axle: 2 pairs of ring lashing eyes per 5 tons at the front on the offset drop deck/rear axle: 6 pairs of lashing eyes laterally in the drop deck per 8 tons, 6 pairs of lashing eyes per 5 tons between the side members, pair of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 tons ring lashing eyes embedded in the floor. Ring lashing eyes embedded in the floor Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Brake system: 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads Electrical system: 24 volt, multi-chamber lights, amber lighting at the sides, 2 white position lights at the front 2 white/red lane departure lights at the rear, rotating beacon with holder, pair of warning signs illuminated and extendable to 3,000 mm, 2 x 7-pin interchangeable plugs at the front Floor: Front offset with steel / checker plate covering, storage box recessed in drive-over slope to offset, tramline area and in the middle between the beams with steel / checker plate covering, rear slope with 70 mm softwood floor, deep loading area incl. rear slope 5900 mm Drive-on ramps: Hook-in strip for aluminum ramps across the entire width. as U-profile across the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Condition: used, empty load weight: 2,560 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,100 mm, loading space width: 2,000 mm, suspension: steel, Year of construction: 2008, Wörmann low-loader trailer with ramps Hedpfx Agjyyyyde Ienl First registration: 2008 2 axles Leaf suspension Fully galvanized Loading area: 5.10 x 2.0 m Unladen weight: 2,560 kg Payload: approx. 8,000 kg Gross weight: 10,500 kg

Condition: new, axle configuration: 3 axles, Equipment: ABS, Ebert TL 30 ST special low-loader, with consistently flat load bed and self-supporting construction. Permissible gross weight: 30,000 kg, unladen weight: 5,900 kg, payload: 24,100 kg, dimensions: 12,000 mm x 2,550 mm (also available in longer and wider versions), full air suspension, last axle self-steering, SAF axles. Mr. Ebert (Tel.) will be happy to assist you. Further information available on our homepage. Errors and prior sale reserved! = Further Information = External dimensions: 0x0x0 Please contact Tobias Ebert for more details. Hnodpfx Agjyfq Afs Iel

Condition: new, axle configuration: 3 axles, Equipment: ABS, Ebert TL 30 ST LB special low-bed trailer, with continuous flat load deck and self-supporting construction. Permissible total weight: 30,000 kg, unladen weight: 6,900 kg, payload: 23,100 kg, dimensions: 13,600 mm x 2,750 mm (also available in standard version), full air suspension, last axle self-steering, SAF axles. Mr. Ebert (tel.) will be happy to assist you. More information can be found on our homepage. Errors and prior sale excepted! = Further information = Exterior dimensions: 0x2750x0 Please contact Tobias Ebert for further details. Hnodpfx Agsyfu Urs Ijl

Condition: new, axle configuration: > 3 axles, Equipment: ABS, Ebert TL 40 ST special low-loader, continuously flat load bed, self-supporting construction, permissible total weight: 40,000 kg, unladen weight: 8,900 kg, payload: 31,100 kg, dimensions 14,000 mm x 2,550 mm (also available in a wider version), fully air-suspended, last axle self-steering, SAF axles. Mr. Ebert (Tel.) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! = Further Information = External dimensions: 0x0x0 Please contact Tobias Ebert for more information. Hnsdpfx Agsyfrfzo Iel

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, Year of construction: 2010, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed Hnsdpfx Agjyxq A He Iel 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: used, functionality: fully functional, machine/vehicle number: W09PTAT210SM39260, empty load weight: 5,690 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 10/2023, total length: 9,400 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 235/75 R17,5", maximum speed: 80 km/h, color: silver, Year of construction: 2023, The images shown are archive images! General construction features 1. Number of axles: 2 and wheels: 4 1.1. Axles with twin tires (number, position): 2 / 1st and 2nd axle 2. Steered axles (number, position): - Main dimensions 4. Wheelbase: - 4.1. Axle distances: 0-1: 5250 mm 1-2: 1810 mm 5. Length: 9400 mm 5.3. Aerodynamic air deflector: not present 6. Width: 2550 mm 7. Height: 3740 mm 10. Distance between the center of the coupling device and the rear end of the vehicle: 9350 mm 11. Loading area length: 7200 mm Weights 13.2. Actual vehicle weight: 5690 kg 16. Technically permissible gross weights 16.1. Technically permissible gross weight (laden): 21000 kg 16.2. Technically permissible axle load: 1. 10000 kg 2. 10000 kg 16.3. Technically permissible axle group load: 1. - kg 2. - kg 16.4. Technically permissible gross combination weight: - kg 17. Admissible weights for registration/operation in domestic/cross-border traffic 17.1. Permissible gross weight intended for registration/operation (laden): 18000 kg 17.2. Permissible axle load intended for registration/operation (laden): 1. 10000 kg 2. 10000 kg 17.3. Permissible axle group load intended for registration/operation (laden): kg 17.4. Permissible gross combination weight intended for registration/operation: - kg 19. Technically permissible maximum coupling point load: 1000 kg Maximum speed 29. Maximum speed: 80.00 km/h Axles and suspensions 31. Location of lift axles: - 32. Location of load-bearing axles: - 34. Drive axles with air suspension or equivalent: Yes 35. Mounted tire/wheel combinations/energy efficiency class: 1: 235/75R17.5 ---/140J, Rim 6.75x17.5 Brakes 36. Trailer brake connections: BBA: Air brake, EBS FBA: Spring-loaded brake on 2nd axle Body 38. Body code: DC I central axle trailer Towing device 44. Approval number or mark of the towing device: - 45.1. Characteristics: - Miscellaneous 50. Type approved according to design regulations for the carriage of dangerous goods: - 51. For vehicles with special purpose: Designation according to Annex I Section A Number 5 of Regulation (EU) 2018/858 of the European Parliament and of the Council: - 52. Remarks: -Drawbar: TP1204236439, -Drawbar eye: V.Orlandi, type 51F8, D=200kN, 5=1000kg, E11 55R-01 1153 -Axles: SAF, Z11-3020, max. 11000kg, 105km/h, -mechanical ramps at the rear of the vehicle; Hedoyxpvfjpfx Ag Isnl 58. Additional information: Conditions: (Ti) All movable vehicle parts must be put in driving position for journeys on public roads and secured with mechanical or equivalent devices. The images shown are archive images!

Condition: used, Year of construction: 1985, 1985 | Langendorf SATÜ 18/18 Fully Refurbished | Used Low Bed Semi-trailer 📍Location: Austria, Eberdorf 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 13900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 15 inspection points 6 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Freshly renovated, not used after repair. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39629 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Hjdjxan E Eepfx Ag Ienl ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, axle configuration: 3 axles, first registration: 08/2017, loading space length: 7,900 mm, loading space width: 2,540 mm, total length: 10,710 mm, total width: 2,550 mm, total height: 3,580 mm, suspension: steel, tire size: 235/75R17,5, color: other, Year of construction: 2017, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 3, Curb weight: 6,380 kg, Gross vehicle weight: 30,000 kg, Chassis type: Full chassis, Chassis material: Steel, Suspension type: Full air suspension, ABS, EBS, Body year: 2017, Axle type: SAF, Tail lift, Tail lift configuration: Rear flap, Tail lift manufacturer: ..., Tail lift material: Steel, Tail lift size: 279 x 75. = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Leaf suspension Axle 1: Twin tires; Steered; Tire tread depth left inner: 6 mm; left outer: 6 mm; right inner: 6 mm; right outer: 6 mm Axle 2: Twin tires; Tire tread depth left inner: 7 mm; left outer: 5 mm; right inner: 4 mm; right outer: 6 mm Axle 3: Twin tires; Tire tread depth left inner: 7 mm; left outer: 7 mm; right inner: 9 mm; right outer: 9 mm Weights Unladen weight: 6,380 kg Payload: 23,620 kg GVW: 30,000 kg Functional Tail lift: ..., Rear flap Loading platform height: 93 cm Environment Emission class: Euro 0 Maintenance APK (technical inspection): tested until 10/2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Easy! • Large, rapidly changing inventory • Recognizable quality • Good price • Fair trading • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates issued quickly • Expert technical services • The safety of "recognizable quality" • And much more… Please visit our website for special offers and the complete stock: Leasing through Kleyn Trucks is possible in most European countries! Hnjdoytbi Espfx Ag Iel Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, empty load weight: 7,500 kg, maximum load weight: 25,500 kg, overall weight: 33,000 kg, axle configuration: 3 axles, loading space length: 8,650 mm, loading space width: 2,520 mm, loading space height: 940 mm, suspension: air, tire size: 235/75R17.5, color: blue, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, turntable steering, air suspension, raise/lower function, liftable 2nd axle, ABS (anti-lock braking system), lashing rings, mechanical ramps, rear support, side aluminium underrun protection, twin tires. Body: 3-axle low-loader trailer with pneumatic loading ramps, drum brakes, 2nd axle liftable! Ramp length approx. 2800mm! New vehicle from stock! Not eligible for EU registration! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Hnjdpjxc Nz Hjfx Ag Isl

Condition: new, empty load weight: 5,740 kg, maximum load weight: 24,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, rotating beacon, 3 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m width, lashing rings, 2-piece loading ramps, mechanical ramps, extendable drawbar, side aluminium underrun protection, twin tyres, EBS. Body: loading length approx. 8.5m, extendable to 3.05m. Demonstration vehicle! Parabolic suspension with axle compensation at the rear, 3 x 10t SAF axles, permissible gross weight up to 30t possible, drawbar adjustable in length. New vehicle from stock with day registration to the manufacturer! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Hnsdpfx Agsxbttqj Isl

Condition: used, empty load weight: 8,800 kg, maximum load weight: 31,200 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 04/1996, loading space length: 10,000 mm, loading space width: 2,510 mm, loading space height: 1 mm, suspension: steel, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 4 axles, turntable, leaf suspension, extendable to 3m, lashing eyes, 2-piece loading ramps, hydraulic ramps, rear support, side aluminium underrun protection, twin tyres, storage box. Body: 4-axle low-loader trailer with hydraulic 2-piece loading ramps. Loading height approx. 900mm. 4x 10t SAF axles, drum brakes, 40mm and 50mm towing eye! Upper platform length approx. 2,900mm! Lower platform length approx. 7,100mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Hnjdsywvhrjpfx Ag Iel

Condition: used, empty load weight: 8,500 kg, maximum load weight: 31,500 kg, first registration: 06/1994, next inspection (TÜV): 08/2025, total length: 11,600 mm, total width: 25,500 mm, total height: 35,000 mm, suspension: steel, tire size: 235 / 75 R 17.5 / 11mm, wheelbase: 1,400 mm, front tire size: 235 / 75 R 17.5 / 11mm, operation weight: 40,000 kg,

Condition: used, maximum load weight: 981 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,500 mm, loading space width: 1,550 mm, loading space height: 330 mm, total width: 2,040 mm, total height: 970 mm, A52 GW26GA00144, low-bed trailer, make STEMA, model SySTEMA ALU ST .1, gross weight: 1,300 kg, low-bed, with overrun brake, aluminum planking, 2.51 m x 1.53 m, 100 km/h... and much more. Subject to errors and prior sale. Hnedpfjyqdnrjx Ag Ijl

Condition: used, maximum load weight: 16,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 04/2012, next inspection (TÜV): 06/2026, loading space length: 7,400 mm, loading space width: 2,540 mm, Equipment: ABS, * ABS * All-round orange warning beacon Hsdpfx Ajyv T Utjg Ionl * BPW ECO axles * Adjustable length towing device * Rear support ----Body: Low-bed trailer, loading height approx. 880 mm, rear sloped, ramp height approx. 710 mm, steel/wood floor, lashing rings, insertion pockets with 4 removable stanchions, 1 pair of container locks at the front, spring-assisted ramps with anti-slip surface. Bucket recess/Length: 1600 mm / Width: 760 mm. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see imprint) form the basis of all contracts of sale, invoices, proforma invoices, orders, and sales discussions.