Semco

Year of construction: 2022, condition: used, Model: TJ-750 Suitable Sheet: PP/PS/PET Max. Sheet Width: 750mm Sheet Thickness Range: 0.35-2mm Kodpfx Ahoyvh Ubevsww Screw Rod Dia.: 75mm Screw L/D ratio: 40:1 Main Motor Power: 110kw Total Power: 350kw Max. Output: 300-400kg/hr Power supply: AC 380V, 50Hz, Three-phase, Four-wire Dimension: L22500xW3200xH3600mm Weight: About 15T

Year of construction: 2022, condition: used, Model: TTF-520AF Forming Area: 520mm x 400 mm Kwjdpfx Aeyvh Tqshvsw Forming Depth (Max.): 110mm Sheet thickness: 0.2-1.6mm Forming Speed (Max.): 30times/min Air pressure: 0.6-0.8mpa Air consumption: 3.0 m³/min Water consumption: 0.7 m³/h Sheet width (Max.): 550mm Suitable Sheet: PP, PS, HIPS, PET, PVC, PLA etc. Power supply: AC 380V, 50Hz, Three-phase, Four-wire Used power: 55Kw Rated power: 136Kw Heating power: 75Kw Procedure: Forming-punching-cutting-stacking Dimension: L10800*W4650*H2670mm Weight: About 11.0T

Year of construction: 2022, condition: used, Model: TQC-650B Max. Forming Area: 650*300mm Max. Forming Depth: 125-180mm Sheet Thickness: 0.3-1.8mm Kwodpfx Ajyvh S Hjhvsw Sheet Width: 660mm Max. Forming Speed: 30 times/min Air Pressure: 0.6-0.8mpa Air Consumption: 2.0m³/min Water Consumption: 0.5m³/h Rated Power: 98Kw Used Power: 69Kw Power Supply: AC 380V,50Hz, Three-phase, Four-wire Dimension: L7000*W2000*H3100mm Weight: About 5T

Year of construction: 2019, condition: ready for operation (used), A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. The system allows mechanical preparation for retrofitting up to 3 additional filler metering systems. It is recommended to renew the lines and the diaphragm pumps before commissioning. Documentation available. An on-site inspection is possible. Kwsdpfx Ajyt N A Hshvsw

Year of construction: 1993, condition: used, functionality: fully functional, OMIPA CO-EXTRUDER CAST LINE 5 LAYERS Complete line for the production of 5 layers cast film Material PET-C, PET-PP Material width 1550 mm Material thickness 0,2 / 0,8 mm Output max. 650 kg/h Nº4 Extruders with screw diameter 120mm / 90mm / 60mm / 45mm Co-extrusion block 5 layers: BA, BAAAB, ACDCB Flat extrusion die-head Nº5 Rolls calender with diameter 412 mm and width 1800 mm Cristallyzer GC/1200 L Dehumidifier SMC 1200 Gravimetric dosing system Kwodpoypkfbsfx Ahvew Edge trim cuttin system Year 1993

Year of construction: 2008, condition: used, Lot consists of: (1) Twin-screw extruder Technical details: screw diameter: 75 mm, capacity: max 200 kg/h, KraussMaffei-Berstorff control, weight: 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight: 1.2 t (1) Calibration table Kedpsyknrzsfx Ahvsww Technical details: table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: contact length approx. 2.5 m, unit length approx. 8 m (1) Tipping table Technical details: length approx. 6,000 mm

Year of construction: 2012, condition: used, Lot consists of: (1) Twin-Screw Extruder Technical Details: screw diameter 75 mm, Capacity: max 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration Table Technical Details: with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-Off Unit Technical Details: speed 0.1 - 11 m/min, pulling force 25,000 N, contact length 1,500 mm, profile clearance WxH 300 x 180 mm (1) Tipping Table Kwodpfjyknp Tox Ahvew Technical Details: slide into adjacent profile, single-strand roller shutter, table length approx. 6,000 mm

Condition: used, functionality: fully functional, machine/vehicle number: 421, input voltage: 230 V, type of input current: three-phase, input frequency: 50 Hz, Transparent Box machine. Production of vinyl lids in Pvc. Solvent glue Max size: 405x280x12,7 mm/405x203x76 mm Min size: 76x25x10 mm Material thickness: 0,12 - 0,25 mm Sold together with Perondi Corner cutter modell 2T 700M, serial no 84 Ksdoyizg Nepfx Ahvoww Cuts 2 corners simultaneously Rotating cutting heads

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted Kwsdpsyc R U Asfx Ahvjw - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Each line comprises: • Main extruder: BA105 AMUT, year of manufacture 2004 • Single-screw co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Pneumatic raw material conveying system • Cooling table with tank (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Run-out table _____ TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Degassing: pump 2.2 kW, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted • Screw: Ø1¾", length 21D, compression ratio 2:1, double-flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (overall 1:25) • Belt type: 3VX600 (4 pcs) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Kedpfeyc R Aasx Ahvjww Technical condition: Both lines complete and fully operational Ready for profile production using multilayer co-extrusion Possible to sell one or both lines – as per buyer’s requirements On-site presentation available. Documentation and photos available. It is possible to purchase a single line for €100,000.00.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available. Kedpfx Aeyc Rtxjhvoww

Condition: used, Production line consisting of: (1) Conical twin-screw extruder Technical details: Screw diameter 43 mm, capacity: max. 150 kg/h, KraussMaffei-Berstorff control system, weight 2.3 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Equipped with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed approx. 0.1 - 11 m/min, pulling force approx. 25,000 N, contact length approx. 1,500 mm, profile clearance approx. WxH 300 x 180 mm, with film application unit (1) Sawing unit Technical details: Upstroke, saw blade diameter 250–400 mm, profile clearance WxH 340 x 20 mm / diameter 115 mm, cycle max. 40 cuts/min (1) Tilting table Ksdpfxox I I Ncj Ahvjww Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Production line consisting of: Ksdox I I Ilepfx Ahvjww (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off/saw combination Technical details: Weight approx. 1.8 t, with two (2) IDE chip extraction systems ME AS 58 (1) Tilting table Technical details: Length approx. 6 m, weight approx. 300 kg

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm (1) Film application unit (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min Kwsdpfxox I Itbj Ahvew (1) Tilting table Technical details: Length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m Ksdpsx I Inxjfx Ahvoww (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Kjdex I Ig Uepfx Ahveww Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t Kwedpfx Ajx I Emfshvew (1) Calibration table Technical details: With three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed 0.1–11 m/min, pulling force 25,000 N, contact length 1,500 mm, profile clearance WxH 300 x 180 mm (1) Punching device + guillotine unit Technical details: Punching force 1,800 N, design: C-frame, punching frequency 130 strokes/min, punching tool LxWxH 185x180x132 (1) Tilting table Technical details: For pushing a single-strand roller shutter into an adjacent profile, table length approx. 6,000 mm

Year of construction: 2021, condition: like new (used), Complete welding and polishing line in like-new condition Kwsdpfx Ahex Irtfjvew

Year of construction: 2000, condition: used, functionality: fully functional, Polypropylene sheet processing / extrusion line for sheets up to 80 mm thickness x 1,200 mm width. No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1700 mm No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1260 mm No. 01 CNC machine with 10 tools, Osai controlled, table size 4,000x1,800 mm No. 01 PPH extruder for sheets width 1230 mm and integrated cutting unit No. 01 PPH mechanical/pneumatic welding machine for plates/frames No. 01 PPH pneumatic welding machine for frames No. 01 PPH hydraulic/pneumatic welding machine for handles No. 01 PPH hydraulic welding machine for sheets width 3,000 mm No. 02 forklifts, each 2,500 kg capacity No. 01 PPH shredder, 100 kg/h Kedpfxjxwnb Ij Ahvsww No. 03 portable PPH extruders No. 02 vacuum lifters, 150 kg each

Year of construction: 2005, condition: excellent (used), Vertical block mould machine: Kurtz mod. Ecomat Basic data: • Year of production: 2005 • Block dimensions (LxWxH): 1060x1320x5200 mm The set includes inlays (height reducers) for blocks: Kwsdpfxjxq N Amo Ahvew - 1060x1320x5130 mm - 1060x1320x4000 mm • Electrical power demand: 400V; 50Hz • Operation silo • Roll out conveyor • Block scale • Inkjet printer • Complete documentation We also have for sale other machines for EPS (expanded polystyrene) production, such as: •steam generator •steam accumulators with capacity •3x cutting lines •3x blockmolds •pre-expander It is also possible to purchase a complete production line (including installation, commissioning, and staff training).

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molding tools for the capsule, Manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, Manufacturer: ARBURG, Model: 720A3200-800, Year of manufacture: 2017 Kwodpew Nriuefx Ahvew The capsules are produced as free-falling parts.

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting Kjdjv Hm A Tepfx Ahveww - Waste grinding (bottom, top, side)

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Material Dryer and loader– M+H Equipment, Germany Kwsdpfxovztb So Ahvew Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Tube Deposit Unit -500

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Kjdpfxsvzqy Se Ahvjww

Condition: excellent (used), Year of construction: 2005, Vertical blockmold: KURTZ mod. MFV (1250×1250 / 1050×4900) Basic data: -Year of manufacture: 2005 -Block dimensions (L×W×H): 1250×1250 / 1050×4900 mm -Operating voltage: 3×400 V, 50 Hz -Power consumption: 77 kW -Blockmold with movable side wall -Complete vacuum system (GARDNER DENVER / SIEMENS) -Hydraulic system: REXROTH–BOSCH -Operational pre-loading silo for the blockmold with dedusting system -Siemens PLC controller and Siemens touch-screen HMI control panel replaced with NEW units in 2019, including a control software upgrade -Siemens TOUCH SCREEN panel (replaced with a NEW one with a larger display) -MATTHEWS printer for block labeling/date marking -Block evacuation system with block storage -Complete set of documentation Kedpfx Ahjucvq Hsvoww -Condition: EXCELLENT It is possible to adjust the maximum block height to, for example, 4550–4600 mm. TAG: Block mold, block mould, block-form, styrofoam, EPS, VIRO, Kurtz, Erlenbach, EREMA, Teubert, Lauscha, Autefa, HIRSCH, EPPINGER, Mert Makina