Rego Da Ínsua S.l.

Condition: ready for operation (used), functionality: fully functional,

Year of construction: 2017, condition: used,

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 38.2 kW (51.94 HP), type of input current: three-phase, type of cooling: air, overall weight: 300 kg, input voltage: 400 V, total width: 1,700 mm, total length: 660 mm, total height: 1,700 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA MECH IB G07 40Y 38.2 kW Cooling capacity: 38.2 kW / 10.86 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi AVB66FLAMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Stratos PARA-C 25-180-12-T02, expansion vessel. Dimensions: 0.66x1.7x1.7 m. Weight: 300 kg. Working hours: 0 h. Condition: New Nodpfx Ahoyxmmbsvokw CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2001, machine/vehicle number: 24, CNC horizontal machining center Nkjdpfx Ajyxml Djhvew

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter Nkjdpfoyxmlwsx Ahvsw -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V01D5/P02D2R1 -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P2.2kW 0.1-320Hz -Number: 2x inverters available -Price: per piece -Dimensions: 140/70/H155 mm -Weight: 0.9 kg/pc.

Condition: new, functionality: fully functional, gearing type: mechanical, fuel type: gasoline, color: orange, overall weight: 130 kg, empty load weight: 65 kg, Year of construction: 2026, displacement volume: 212 cm³, machine/vehicle number: 500 XX XXX, motor model: RATO R210, Motorized Bitumen Sprayer MB 200 The motorized bitumen sprayer MB 200 is designed for spraying bitumen onto asphalt surfaces. It is used for repair of asphalt surfaces or for the construction of new asphalt layers. The bitumen is applied using a manually operated spray nozzle with continuously adjustable spray cone. The bitumen is pumped and preheated from a drum mounted on a transport trolley together with the spraying unit. Nedpfxeyxmlqs Ahvekw The unit is powered by an air-cooled gasoline engine RATO R210. Cleaning of the system is simple by flushing with diesel fuel. Standard equipment: -Own drive engine RATO R210 -Freewheel clutch -Bitumen pump -Forced heating with recirculated exhaust gases -Suction filter -Spray bar with spray nozzle Additional equipment: -Transport trolley

Condition: excellent (used), Paul KME 2/1000R Passage/working width: 1000 mm Nkodpfxoyxmlks Ahvsw Cutting height: Up to approx. 120–125 mm. Motor power: 18.5 kW Cutting system: movable saw (saw sleeves), computer controlled Feed: Infinitely variable feed adjustment Hydraulic adjustment of the upper roller height.

Condition: like new (used), Year of construction: 2008, Maximum turning diameter: 50 mm Maximum turning length: 60 mm Spindle nose I: ASA Flat Spindle nose II: ASA Flange Spindle speed (rpm): 4500 (8000) Nksdpfx Asyxmldehvjw Motor power: 3.7 kW

Condition: used, Year of construction: 2008, machine/vehicle number: 3080798, CNC lathe with bar feeder BAR 300 BCE Nkodpeyxmk Tefx Ahvow

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Alada Electric, frequency converter -Type: ALD2000V ALD2400V02D2/P04D0R1 -Input: 3PH 380V 50/60 Hz -Output: 3PH 380V V2.2/P4.0kW 0.1-320Hz -Number: 1x inverter available -Dimensions: 140/70/H155 mm -Weight: 0.9 kg Nedpfjyxmkyox Ahvjkw

Condition: used, JOOS Shelf Press Nedoyxmktepfx Ahvskw Shelf length: 220 cm, Shelf width: 125 cm, Clearance between shelves: 270 mm, Straight shelves, Press sold as cold, Piston diameter: 80 mm, 4 pistons, Machine in stock, inspection possible.

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 66395, CNC lathe with accessories Nkjdpfx Ahsyxmkmsvow

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning length: 380 mm, turning diameter: 450 mm, spindle bore: 59 mm, rotational speed (max.): 5,000 rpm, controller model: Seicos 40L Multi, TECHNICAL DETAILS Turning diameter: 450 mm Turning length: 380 mm Max. machining diameter: 340 mm Travel X-axis: 215 mm Travel Z-axis: 400 mm Bar capacity: 51 mm Speed range: 30 to 5,000 rpm Drive power - spindle motor: 11 / 7.5 kW Spindle nose: A2-6 Spindle bore: 59 mm Bearing diameter: 100 mm Turret: 16 stations Feed rate: 0.001 to 500 mm/min Rapid traverse X/Z: 30 m/min Shank diameter: 25 x 25 mm Drill shank diameter: 40 mm Tailstock taper: MT 5 Tailstock travel: 300 mm MACHINE DETAILS Control: Seicos 40L Multi Total power requirement: 23 kVA Dimensions & Weight Footprint: approx. 5.5 x 2.8 x 2.2 m Machine weight: approx. 4.6 t EQUIPMENT Documentation Chip conveyor Tailstock Signal lamp Parts discharge Tool setting arm Work area illumination Tool holder Nksdsyxmkaepfx Ahvew

Condition: excellent (used), CTS Type: CS-70/1000-5 Water-cooled Condenser For sale is a high-quality climate and temperature test chamber / environmental test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is used to simulate a wide range of environmental conditions and is typically employed in industry, research, and quality assurance. It enables precise testing under extreme temperature and humidity conditions, suitable for: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulation Thanks to the large test chamber (1000 liters) and advanced control technology, both rapid temperature changes and steady long-term tests can be performed. The system is water-cooled, ensuring stable and efficient operation. Technical data: Control: - Multi-touch controller with integrated program generator - Programmable test sequences - Side cable port: 50 cm / 125 cm Temperature range: - Temperature: –70°C to +180°C - Heating rate: approx. 6 K/min - Cooling rate: approx. 5 K/min - Temperature constancy: ± 0.3 K Climatic data (humidity): - Climate temperature range: +10°C to +95°C - Humidity range: 10% to 98% rH - Humidity stability: - Range I: ± 1.5% rH - Range II: ± 3% rH - Dew point range: - I: +7°C to +94°C - II: –10°C to +7°C Dimensions: - Exterior (HxWxD): 1950 x 1270 x 2245 mm Nksdpoyxmi Aefx Ahvsw - Interior (HxWxD): 900 x 1000 x 1100 mm - Test chamber volume: 1000 liters Electrical data: - Connection: 400 V, 3/N, 50 Hz - Tolerance: +6% / –10% - Connected load: approx. 16.4 kW - Rated current: approx. 26.8 A Refrigeration system: - Refrigerant: R404A & R23 - Weight: approx. 900 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented trial run. Condition: used Scope of supply: (see photo) (Technical data and specifications subject to change and error!) For further questions, you are welcome to contact us by phone.

Condition: ready for operation (used), WEILER LZ 330 / From educational institution - Swing diameter over bed: 330 mm - Swing diameter over cross slide: 165 mm - Turning length: 800 mm - Speed range / gearbox: 24 - 2800 rpm - Automatic longitudinal / face feeds - Bar capacity: 38 mm - Collet chuck system incl. 20 collets - Multifix quick-change toolpost incl. inserts - Copying attachment - Various accessories - Documentation Dimensions (LxWxH): 1.8 x 0.8 x 1.6 meters / Weight 750 kg Nkjdeyxmivepfx Ahvjw Subject to errors and input mistakes.

Condition: used, Year of construction: 1999, machine/vehicle number: 71.28, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, distance table to spindle center: 750 mm, CNC machining center Nsdpfx Ahjyxmiiovekw

Condition: used, Year of construction: 2011, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 30,000 m/min, Mori Seiki NL2500SY-700 Brand: Mori Seiki Model: NL2500SY-700 Category: CNC Lathe Year: 2011 CNC Control: Mori Seiki MSX-850 IV Machine weight: 6.2 tons Capacity Max. swing over bed: Ø 579.8 mm Max. swing over carriage: Ø 755 mm Max. turning diameter: Ø 356 mm Max. turning length: 705 mm Bar capacity: Ø 80 mm Axis travels X-axis: 260 mm Y-axis: ± 50 mm (100 mm total) Z-axis: 795 mm C-axis: ± 360° Main spindle Spindle diameter: 254 mm Speed: 4,000 rpm Spindle nose: ASA-8 C-axis indexing: 0.001° Power: 18.5 kW (cont./30 min) Sub spindle Speed: 5,000 rpm Spindle nose: ASA-6 C-axis indexing: 0.001° Power: 15 kW (cont./30 min) Turret 12 driven tool stations Tool speed: 6,000 rpm Tool power: 5.5 kW Turning tools: 25x25 mm Boring: Ø 50 mm Feed rates Rapid traverse X-axis: 30,000 mm/min Nsdsyxmh Sopfx Ahvokw Rapid traverse Y-axis: 30,000 mm/min Rapid traverse Z-axis: 10,000 mm/min C-axis: 400 rpm Accessories Static toolholders + 4 driven (2 radial, 2 axial) Chip conveyor + tank Top Automazioni – Magic bar feeder Electrical transformer Part unloading arm 250-liter coolant tank Manuals + electrical diagrams CE Declaration

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC vertical machining center, handling crane not included; pack of tools included. Nksdoyxmhxjpfx Ahvsw

Condition: used, Year of construction: 2007, machine/vehicle number: 84.62, CNC machining center Njdpfxsyxmhre Ahvekw

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Euromac hydraulic punching machine Type CX750/30/2000 Capacity 30 t Y-axis reach: 1000 mm X-axis reach: 2000 mm X-axis reach with repositioning up to 10,000 mm Nkodoyxmhljpfx Ahvjw CNC control: Euromac Eurowin 6-station multitool + with 6-station die holder

Condition: used, mileage: 510,000 km, power: 346 kW (470.43 HP), first registration: 09/209, fuel type: diesel, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 580 l, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: air conditioning, electric window regulation, fridge, spoiler, Transmission: 14 GZ 3000 OD, Automatic Drive: Wheel Number of cylinders: 6 Empty weight: 7.796 kg Carrying capacity: 10.204 kg GVW: 18.000 kg Engine type: MAN D2676 LF Nkjdpfjyxmhfex Ahvjw = Additional options and accessories = - PTO - Roof spoiler - Tipper hydraulics

Condition: new, functionality: fully functional, fuel type: hybrid, color: red, overall weight: 4,700 kg, empty load weight: 4,200 kg, operation weight: 4,700 kg, lifting power: 4,000 kg/m, drive condition: 100 %, Year of construction: 2026, Driveline Engine brand: Yanmar Weights Own weight: 4,700 kg Functional Lifting capacity: 3,990 kg CE marking: yes Condition Technical condition: very good Optical condition: very good Other information Transport dimensions (L x W x H): 4.3 x 0.8 x 1.93 m Country of production: NL Additional information Contact Hoeflon Nederland for more information. = Remarks = Hoeflon C10 * Year: 2022 * Diesel and 380 Volt drive * Approximately 1,600 operating hours * Fly-Jib * 4,000-kg winch * Non-marking tracks * Remote control * 22 meter hook height * 19.8 meter horizontal outreach Nkedpfx Aeyxmg Uohvew * 360° unlimited slewing range * 3,990 kg lifting capacity * 4,700 kg own weight * Maintenance history included

Condition: good (used), machine/vehicle number: XLRTE47XS0E577130, mileage: 831,000 km, power: 353 kW (479.95 HP), first registration: 02/2002, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2002, Equipment: electric window regulation, fog lights, spoiler, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Airbag - Armrest - Drum brakes - Front suspension: Leaf - High sleeping cabin - Open roof - Radio - Rear suspension: Air - Roof Spoiler - Sleeper cabin - Spare wheel - Spoilers Nedpfx Ajyxmgnehvokw = More information = Tyre profile: 50% Brakes: drum brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Technical condition: good Visual appearance: good

Condition: excellent (used), machine/vehicle number: WDB66800210758452, mileage: 442,459 km, power: 66 kW (89.73 HP), first registration: 03/2002, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 6,200 mm, total width: 2,500 mm, total height: 3,800 mm, Year of construction: 2002, Equipment: ABS, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Rear suspension: Leaf = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Nodpfx Ahsyxmghsvjkw Front axle: Steering Rear axle: Double wheels Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 2013, Lot consists of: (1) Roll Bending Machine Technical Details: Capacity 10 mm; width 1,660 mm; length 5,310 mm; height 1,590 mm Nkodjyxmgbopfx Ahvow