JH Maschinen

Condition: good (used), Year of construction: 2004, * CNC-control Heidenhain iTNC 530 * Number of Controlled Axes: 5 + spindle * NC-swivel-type rotary table, diameter 800 mm - Workpiece weight in clamped horizontal position 1000 kg - Positioning mode for both axes 600 kg (upper 30 deg. 500 kg) - 4-5 axes simultaneous mode 400 kg - Swivel range 45 deg. to the work spindle, 25 deg. away from the work spindle * 46-Position Tool Changer * Direct Measuring System, Resolution 0.001 mm * Coolant System * Chip Conveyor Fodpfx Absx E T Rto Tegk x-travel 800 mm y-travel 1000 mm z-travel 655 mm Feed Rate: 10,000 mm/min Rapid Traverse: 30,000 mm/min Spindle Speed: 0-24,000 rpm Tool Holder: HSK-A 63 Power: 24 kW Torque: 60 Nm Max. Tool Length: 220 mm Max. Tool Diameter: 63 mm Chip-to-Chip Time: 12 sec Total Power Requirement: 40 kW Machine Weight: 10,500 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM526 1506, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, controller manufacturer: FANUC, controller model: SERIES 18i-MB, total height: 3,300 mm, total length: 2,700 mm, total width: 2,700 mm, table width: 470 mm, table length: 1,500 mm, spindle speed (min.): 36 rpm, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 125 mm, input voltage: 400 V, Equipment: chip conveyor, STAMA MC 526 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 45 A - Table with three T-slots - Incl. 4th axis - Incl. 42-position tool changer - Overhang: 350 mm - Working spindle bearing diameter: 65 mm - Incl. chip conveyor and coolant system - Note: without the clamping devices shown in the photos Fjdpfx Aex E Tt Iob Togk Notice: The item must be collected bindingly between 04 and 12 March 2026 on a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: ready for operation (used), Year of construction: 2012, Available immediately from Swiss toolmaking facility (CH): Vertical 5-Axis Simultaneous Machining Center Unitech Model: HSM – IC 5-Axis Year of manufacture: 2012 Heidenhain iTNC 530 Table size: 1100 x 600 mm Travel (X/Y/Z): 1080/610/810 mm Rotary table diameter: 600 mm Spindle speeds up to 15,000 rpm Feed rates up to 30,000 mm/min Table load capacity: 500 kg Tool holder: BT 40 Magazine: 40 stations Through-spindle coolant (IKZ) 60 bar Chip conveyor Compressed air through the spindle Spindle hours: 8,200 / spindle will undergo a complete overhaul in 2025, after which it will be reset to 0 hours Glass scales on X and Y axis Zero-point measuring system in rotary table Infrared measuring system Zero-point clamping system integrated in rotary table with 10 clamping pots, manufacturer: Schunk Weight: 10 tons Fjdpfxox E Rv Hj Ab Togk Price: EUR 17,500.— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex location: Vertical Machining Center Sigma Type Zenit 3 Year of manufacture 2001 Heidenhain TNC 426 – M Table 1200 x 500 mm Travel X/Y/Z 1000/500/550 mm SK 40 Tool magazine for 50 tools Spindle speeds up to 12,000 rpm Through-spindle coolant Weight 6.5 tonnes Priced at EUR 7,000,-- plus VAT ex location. Fgedpfx Aex E Rvysb Tjk

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 6800 kg Measurements height 2808 mm Dimensions Machine Length 2929 mm Table Table load 1200 kg Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 18.5 kW Movement X-Axis Movement 1050 mm Z-Axis Movement 510 mm Y-Axis Movement 530 mm Tools Max weight 8 kg This 3-axis Mazak VCS 530C vertical machining centre was manufactured in 2014. It features a table size of 1300x550 mm, X/Y/Z travels of 1050/530/510 mm, and a maximum spindle speed of 12000 min⁻¹. The machine supports a table load up to 1200 kg and includes a 30-tool magazine with a rapid tool change time of 2.8 seconds. Consider the opportunity to buy this Mazak VCS 530C vertical machining centre. Contact us for more information about this machine. Fodpfx Asx E Edxeb Tsgk Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 6500 kg Measurements height 2500 mm Dimensions Machine Length 2800 mm Main Drive Number of axis 3 Fgjdpfxjx E Ef As Ab Tok Spindle Speed 8000 RPM Spindle motor power 7.5 kW Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2002. It features a spindle speed of 8000 rpm, a 24-pocket tool magazine, and a robust 6500 kg construction for stability. The compact design allows for efficient use of workshop space, while the high load capacity of 800 kg supports a variety of applications. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 103 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2009, operating hours: 3,275 h, X-Axis Travel: 1,100 mm. Y-Axis Travel: 600 mm. Z-Axis Travel: 510 mm. Work Table: 1,300 x 600 mm with 6 T-slots (Size 18). Max. Table Load: 1,000 Kg. Spindle: 60 - 12,000 RPM. Drive Power: 10 / 17 KW. Taper: ISO 40 / DIN 69871A. Magazine: 32 places. Internal Coolant (IKZ): 20 bar. Fgodpjx Ezhtjfx Ab Tsk Coolant Tank: 480 l.

Condition: like new (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, table width: 520 mm, table length: 1,150 mm, table load: 500 kg, spindle speed (max.): 8,000 rpm, Used vertical machining center Fanuc model VMC 1050A with: - X-axis travel: 1050 mm - Y-axis travel: 520 mm - Z-axis travel: 520 mm Fodpsx Ex Ahefx Ab Tsgk - Fanuc 18M control unit - 24-position tool magazine - Spindle speed with gear change: 8000 rpm - Complete CE-compliant full enclosure - Standard accessories - Year of manufacture: 2002 Free financing over 12/24 months

Condition: ready for operation (used), Year of construction: 2000, Main Drive Number of axis 3 Spindle Speed 10000 RPM Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm This 3-axis Quaser MV 204 II was manufactured in 2000. It features a spindle speed of 10,000 rpm and a CNC control system by Selca 3045 PD. The machine includes a magnetic table measuring 630 mm x 400 mm and a tool magazine with 20 positions. If you are looking to get high-quality milling capabilities, consider the Quaser MV 204 II machine we have for sale. Contact us for more information. Fodpfxox Enkue Ab Tegk Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 6000 kg Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper SK 40 Movement X-Axis Movement 1050 mm Fgedpfxex Enlro Ab Tok Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Vertical machining center, Haas VF-3SS, year 2016, with internal cooling, rotary table, mist extractor... Fgjdjx El Ukepfx Ab Tek

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN 530, workpiece length (max.): 1,250 mm, workpiece width (max.): 850 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,200 kg, table width: 850 mm, table height: 640 mm, table length: 1,250 mm, spindle speed (max.): 18,000 rpm, distance table to spindle center: 700 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, DECKEL MAHO DMC 100V Machine after complete rebuild. Spindle overhauled and bearings replaced. Tool measurement laser: BLUM Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: DECKEL MAHO Model: DMC 100V LINEAR Control: HEIDENHAIN 530 Year of manufacture: 2003 Fsdjx Elxijpfx Ab Tsgk Table size: 1250x800 mm Travel: X 1000, Y 800, Z 500 mm Workpiece weight: max. 1200 kg Major machine overhaul: 06.2025 Spindle: HSK 63A 18000 rpm Power S1/S2: 15kW/19kW Torque S6 40%ED: 130Nm Tool changer: 60 positions Workpiece probe: HEIDENHAIN Tool probe: BLUM laser Chip conveyor Internal coolant supply (IKZ) Machine in very good condition, after complete overhaul. Regularly serviced. Machine is in continuous operation.

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Fgjdpfxox D Igdj Ab Tjk Z-Axis Movement 510 mm Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 7000 kg Control Unit Brand FANUC Model 0i-MD Movement X-Axis Movement 1020 mm Z-Axis Movement 550 mm Y-Axis Movement 610 mm Main Drive Spindle Speed 8000 RPM Spindle motor power 15 kW Tool taper ISO 40 Number of axis 4 Table Table load 600 kg Table Width 1200 mm Table Length 600 mm Tools Slots in storage 24 Max weight 7 kg Media Internal cooling yes Fjdpfjx D Hdbsx Ab Tegk This Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 24 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 16000 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 3 Movement X-Axis Movement 1100 mm Y-Axis Movement 1000 mm Fodjx D I I Uepfx Ab Tsgk Z-Axis Movement 550 mm This 3-axis TRIMILL Speed 1110 was manufactured in 2005. It features X/Y/Z travels of 1100x1000x550 mm and a tool changer with 10 positions. Weighing 16000 kg, this vertical machining centre represents a robust option for precise milling operations. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 2400 mm Measurements depth 2800 mm Fjdpfx Aox D Ig Djb Tegk Measurements height 2800 mm Machine weight 5000 kg Main Drive Spindle speed range up to 10000 or 12000 Tool taper BT40 or CAT40 Movement X-Axis Movement 1067 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 610 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 1500 kg Tools Number of index 24 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VMX42 vertical machining center was manufactured in 2007. It features a robust table size of 1,270 × 610 mm, supporting a maximum load of 1,500 kg. Equipped with a high-speed spindle capable of up to 12,000 rpm and a BT40 taper, it ensures efficient machining. The machine includes a 24-tool automatic changer and rapid traverse rates of 24 m/min. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1994, General Data Machine weight 9100 kg Measurements height 3000 mm Dimensions Machine Length 3700 mm Main Drive Number of axis 3 Fedpfx Asx D Ih Ieb Togk Spindle Speed 8000 RPM Tool taper SK 40 Movement X-Axis Movement 1000 mm Z-Axis Movement 500 mm Y-Axis Movement 800 mm This 3-axis DECKEL DC 100V vertical machining centre was manufactured in 1994. It features a Dialog 112 control, a worktable of 1,250 x 800 mm, and a tool magazine with an automatic changer holding approximately 30 positions. The spindle operates at up to 8,000 rpm. Consider the opportunity to buy this DECKEL DC 100V vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Controller Brand FANUC Model 0iMF Main Drive Spindle speed range 8000 rpm Spindle motor power 11 kW Tool taper BT40 Fodpfx Absx D I I Ie Tjgk Number of axis 3 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 24 m/min Table Table load 700 kg This 3-axis Hartford LG-1000 vertical machining center was manufactured in 2017. It features a 1150x510mm table with a load capacity of 700kg, an ATC with 24 positions, and a spindle speed of 8,000 rpm. The machine includes a FANUC 0iMF controller and linear guide ways. If you are looking to get high-quality milling capabilities, consider the Hartford LG-1000 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,757 h, General Data Measurements width 2794 mm Measurements depth 2235 mm Measurements height 2692 mm Machine weight 5670 kg Control Unit Brand HAAS Fgsdpfx Abox D Iy Do Tek Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1016 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Workpiece Workpiece weight 794 kg Tools Max weight 5.4 kg Max tool diameter 76 mm Max tool length 330 mm This 4-axis HAAS VF-3SS vertical machining center was manufactured in 2017. It features a 1016 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. The table supports up to 794 kg, with dimensions of 1219 mm by 457 mm. It includes 24 tool pockets and achieves a maximum spindle speed of 12,000 RPM. Consider the opportunity to buy this HAAS VF-3SS vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,066 h, General Data Machine weight 10500 kg Main Drive Spindle Speed 12000 RPM Spindle motor power 216 kW Number of axis 3 Control Unit Fgedpfx Asx D Iubsb Tok Brand HEIDENHAIN Model intc530 Movement X-Axis Movement 1000 mm Z-Axis Movement 550 mm Y-Axis Movement 700 mm This 3-axis Huron KX 10 SP was manufactured in 2004. It features a HEIDENHAIN iTNC 530 control unit, a working range of 1000 x 700 x 550 mm, and a table size of 1200 x 700 mm. The spindle operates at speeds up to 12,000 rpm with a power of 21.6 kW. It includes a 20-tool magazine and has a machine weight of 10,500 kg. If you are looking to get high-quality milling capabilities consider the Huron KX 10 SP machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 238 h, General Data Machine weight 7212 kg Control Unit Brand HAAS Main Drive Spindle speed range 7500 Number of axis 3 Movement X-Axis Movement 1016 mm Y-Axis Movement 660 mm Fsdpfx Aex D Itqsb Tsgk Z-Axis Movement 635 mm Table Outer length 1372 mm Outer width 610 mm Tools Slots in storage 30+1 This HAAS VF-3YT/50 Vertical Machining centre was manufactured in the year 2017 in the United States and has 238 production hours. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 6850 kg Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper SK 40 Movement X-Axis Movement 1067 mm Z-Axis Movement 610 mm Y-Axis Movement 610 mm Tools Slots in storage 30 Fgedpsx D Iadefx Ab Tsk Control Unit Brand HURCO Model MAX5 This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm and a machine mass of 6450 KG. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 6850 kg Main Drive Number of axis 3 Tool taper SK 40 Movement X-Axis Movement 1067 mm Z-Axis Movement 610 mm Y-Axis Movement 610 mm Tools Slots in storage 24 This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. Application Types Fgodpfx Abox D H U Te Tok Milling

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 3500 Measurements depth 2500 mm Machine weight 7000 kg Control Unit Brand SIEMENS Model Sinumerik Fgjdpfx Abex D H Slo Tok Main Drive Spindle speed range 12000 – 16000 Spindle motor power 11 – 15 kW Movement X-Axis Movement 1000 mm Y-Axis Movement 550 mm Z-Axis Movement 500 mm Table Outer length 1100 mm Outer width 550 mm Table load 800 - 1000 kg This 3-axis GENTIGER GT-105V was manufactured in 2008. Ideal for precision machining, this vertical machining center offers robust construction and reliable performance. Consider the opportunity to buy this GENTIGER GT-105V vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 6900 kg Measurements height 2750 mm Measurements depth 3000 mm Dimensions Machine Length 2550 mm Main Drive Number of axis 3 Movement X-Axis Movement 1050 mm Z-Axis Movement 460 mm Y-Axis Movement 560 mm Fsdpfx Abex D Dvbs Tegk This 3-axis Okuma MB-56VB vertical machining center was manufactured in 2005. It features a working surface of 1300 × 560 mm, a maximum table load of 900 kg, and rapid feed rates of 40 m/min in X/Y and 32 m/min in Z. The spindle operates up to 12,000 rpm with a power of 20 kW. Tool magazine holds 32 tools. If you are looking to get high-quality milling capabilities consider the Okuma MB-56VB machine we have for sale. Contact us for more information. Application Types Milling