Richter-Handel

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 6/0049/35449, MACHINE SPECIFICATION Centre height 190mm Distance between centres 1250mm Swing over bed 387mm Swing over cross slide 241mm Spindle bore (max. Bar dia) 54mm Spindle nose mounting D1-6 Camlock Taper in spindle nose bush & tailstock barrel No. 4 Morse Width of bedways 279mm Total travel of cross slide 235mm Total travel of top slide 120mm Total travel of tailstock barrel 155mm Spindle speeds (16) 25-2000rpm Drive vee belt and clutches Spindle motor 5.6kW Whitworth threads (45) 2 -72 tpi Cgjdpsy Nkwfjfx Akcjt Diametral threads (21) 8 – 44 DP Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds. Per rev. of spindle 0.0015 – 0.040” Surfacing feeds. Per rev. of spindle 0.00075 – 0.020” Machine in Metric execution Machine Equipped with Newall NMS300 2 axis DRO system 3 & 4 Jaw chucks Quick change toolpost and 3 off toolholders Lighting Coolant system Chuck guard Rear splashguard

Condition: ready for operation (used), Colchester Master 3250 Lead-/Feed-Screw Lathe | Lathe | Turning Machine Swing over bed: 350 mm Swing over cross slide: approx. 196 mm Center height: 170 mm Spindle bore: 42 mm Spindle speed: approx. 20–3250 rpm Distance between centers: 1250 mm Main motor: 7.5 kW (10 HP) Thread cutting: - Metric pitch 0.2 – 14 mm (51) - Inch thread T.P.I. 2–56 (56) - Module threads, pitch 0.2 – 3.5 (20) - Diametral pitch (D.P.) 8–56 (20) You are welcome to arrange a viewing appointment. Csdpfxey Nknkj Akcsgt We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. A valid VAT ID number is required. Subject to prior sale. Visit our shop and check out our other listings. Brand names and trademarks mentioned are property of their respective owners and are used for identification and description purposes only. Deviations in technical data and errors in article description may occur and are subject to change.

Condition: refurbished (used), Product Information "Voest Alpine DA 160" Lead and feed screw lathe Voest Model DA 160 Condition: Refurbished Technical Specifications Centre height: 165 mm Distance between centres: 650 mm Swing over bed: 330 mm Swing over cross slide: 190 mm Bed width: 210 mm Lead screw diameter: 25 mm Chuck diameter: 160 mm Tailstock taper: MT 3 Spindle speeds (16): 30 - 2,500 rpm Motor power: 2 / 2.4 kW Quill travel: 100 mm Dimensions (LxWxH): 1,500 mm x 900 mm x 1,650 mm Equipment: - 3-axis digital readout, brand Sino – NEW Cgodpfx Ajy Ndqrjkcjt - 3-jaw lathe chuck - Emergency-stop push button - Multifix quick-change toolholder system, 6 holders - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with Morse taper arbor - Live centre - Lead and feedscrew cover NEW - Chuck guard, secured with limit switch - Operating tools - Operating manual - Machine feet

Condition: excellent (used), Conventional lathe Manufacturer: ZMM Sliven Huvema Inventory no. Model: HU310 x 750 Year of manufacture: 2007 Distance between centers: 750 mm Center height: 155 mm Swing over bed: 310 mm Csdpfx Aksy I Dqvjcsgt Spindle bore: 32 mm 3-jaw chuck Quick-change tool holder Voltage: 380 V Machine weight approx. 700 kg 3 units in stock!!!

Condition: excellent (used), With DRO With step-down gear for spindle speeds Center height150 mm Distance between centers 630 mm Turning diameter over bed 340 mm Spindlespeeds 55-3000 rpm Spindle bore 40 mm Pitch of leading screw 4 mm Tail stock MK5 Misc.accessories MARCELS MASCHINEN CH Codpsy Iz Ixjfx Akcjgt

Condition: ready for operation (used), L&Z Lathe WEILER LZ 330 incl. new 3-axis digital readout (from educational facility) - "NEW" 3-axis digital readout - Center height 165 mm - Swing over bed 330 mm - Turning length 800 mm - Spindle speed range (gearbox) 25–2800 rpm - Automatic longitudinal/cross feeds - New Multifix toolpost with holders - Three-jaw chuck Csdoy Id Uhspfx Akcegt - Collet system with 20 collets - Original copy attachment - Various accessories - Documentation Dimensions (LxWxH): 1.8x0.7x1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, turning diameter over cross slide: 250 mm, spindle bore: 56 mm, turning diameter over bed slide: 400 mm, center height: 200 mm, turning length: 1,500 mm, feed length X-axis: 180 mm, feed length Z-axis: 1,175 mm, quill travel distance: 110 mm, total length: 2,570 mm, total width: 780 mm, total height: 1,800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, bed width: 220 mm, overall weight: 980 kg, quill mount: MK 4, three-jaw chuck diameter: 200 mm, spindle mount: MK 6, input voltage: 400 V, We are offering this new Holzmann ED1500KDIG_400V lathe, year of manufacture 2026. Cgsdpfx Akjy Ibnxocjt Manufacturer: Holzmann Model: ED1500KDIG_400V Year of manufacture: 2026 Condition: new Category ID: 138 Type ID: 2551 Machine type: lathe If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1991, Technical Specifications HBX 360 Distance between centers (mm): 750 Center height (mm): 180 Maximum turning diameter over bed (mm): 360 Cgedoy H Dxwspfx Akcet Maximum turning diameter over cross slide (mm): 180 Spindle bore (mm): 37 Maximum cross slide travel (mm): 180 Cross slide width (mm): 160 Tailstock quill travel (mm): 150 Tailstock quill diameter (mm): 46 Bed width (mm): 335 Compound slide travel (mm): 110 Compound slide width (mm): 110 Type of quick-change toolpost Spindle taper type Tailstock Morse taper: MT5 Spindle speed (rpm): 50 to 3000 Spindle speed variator: Yes (hydraulic) Spindle motor power (kW): 4.5 Cross feed range (m/min): 0.0125 to 5.6 Rapid longitudinal feed range (m/min): 56 to 112 Thread cutting: Yes Metric threading (number) (mm); Whitworth thread range (tpi) Brake motor Electrical supply: 380V three phase Overall dimensions (mm): 2000 x 1000 x 1250 Weight (kg): [not specified] Chuck: Manual/Hydraulic 3-jaw Equipment: - 2-axis Heidenhain digital readout - Work light - 3-jaw manual chuck - Quick-change toolpost - Foot brake

Condition: used, Year of construction: 2001, Universal lead and feed screw lathe Manufacturer: GDW Model: LZ 360 S Year of manufacture: 2001 - workshop tested Machine no.: 1104 071 Geometric acceptance with test protocol Centre height: 175 mm Centre distance: 800 mm Accessories: Codpfx Aey H Di Nskcjgt - 3-axis digital display FAGOR NVP 300 TS-RS with switchable constant cutting speed - Retrofit kit for converting tailstock from crank tailstock to lever drilling tailstock - Chuck guard with electrical interlock - Braked drive motor - Emergency stop (dual, left and right) - Quick-change tool post, base body size B - Bed stop - Rear chip guard - Removable chip tray - Coolant unit - 2 fixed centers MK 3/60° - Safety driver plate - Operation keys - CE declaration of conformity - CE documentation (operation manual) Used, sold as-is without warranty The machine's technical specification corresponds to the manufacturing year.

Condition: good (used), functionality: fully functional, spindle bore: 56 mm, turning diameter: 460 mm, JESSEY 1850 ENC CNC Teach-In Lathe — For Sale Reliable Taiwanese-built teach-in CNC lathe equipped with an Anilam 4200T control. Ideal for both manual and programmed turning operations, well suited for workshops that need the flexibility of conventional turning combined with full CNC capability for repeat work. Cgjdpsy Hmilefx Akcjt Key features - Anilam 4200T CNC control with Teach-In mode - Heavy-duty spindle with generous bar capacity - Long bed for shaft and large-component work - Tailstock included Technical specifications CNC control: Anilam 4200T Distance between centres (turning length): 1250 mm Swing over bed: 460 mm Max. turning diameter: 460 mm Spindle bore (bar capacity): 56 mm Spindle motor power: 7.5 kW Max. spindle speed: 1800 rpm Tailstock: Yes

Condition: used, Year of construction: 2018, 2018 Doosan 2100 A CNC Turning Centre in excellent condition with 12-position turret, LNS barfeed, swarf conveyor, parts catcher, tool setter, and tooling package. Machine Specification: ----- TRAVELS X Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 36 m/min Travel (X Axis): 205 mm Travel (Z Axis): 340 mm ----- SPINDLE Max. Spindle Speed: 6000 r/min Max. Spindle Power: 15 kW Max. Spindle Torque: 127 N·m ----- TURRET Number of Tool Stations: 12 ----- CAPACITY Chuck Size: 6” Bar Capacity: 51 mm Maximum Turning Diameter: 350 mm Maximum Turning Length: 330 mm MACHINE SIZE Length 2320mm Width 1595mm Height 1693mm Weight 3100kg ----- ACCESSORIES LNS Barfeed Swarf Conveyor Codoy Hiygjpfx Akcogt Parts Catcher Tool Setter Tooling Package Control: 2018 Spec: Spindle bore 51 mm | Max Swing mm | Travel X 205 Z 340 mm Accessories: Barfeed, Swarf conveyor, parts catcher, tool setter, Tooling package

Condition: used, Stock number: 2841 Manufacturer: WMW Year of manufacture: 1961 Machine number: 3318/61 Type / Model: DLZ 355 Cedpfx Aoy Hgnzekcogt Control: conventional Center distance: 2,000 mm Spindle bore: 35 mm Center height: 180 mm Turning diameter over bed: 355 mm over carriage: 220 mm Speed range: 18 to 2,500 rpm Longitudinal feed: mm/rev Cross feed: mm/rev Equipment: 4-way toolpost, leadscrew Power connection: 5.8 kW Condition: used Weight: 2.2 t Dimensions: 3,000 x 1,400 x 1,700 mm

Condition: used, Year of construction: 1996, greates pass round over bed 350 mm swing diameter over face slide 200 mm centre distance 800 mm centre height 175 mm turning length 700 mm 3-jaw chuck Röhm Ø 160 spindle bore 46 mm Cgjdpfxsy Ez Dzo Akcet spindle head Gr. 5, DIN55027 number of spindle speeds 18 spindle turning speed range 31,5-2500 U/min tailstock quill taper MT 3 weight of the machine ca. 1000 kg Joystick control 3-axis digital display Rotating center point Chip guard Multifix tool holder, size E, with 3 interchangeable cassettes Adjustable machine feet Coolant system Worklight Operating instructions included Very good condition, The machine comes from a training workshop at a large corporation

Condition: new, turning diameter: 360 mm, center width: 1,000 mm, – Centre distance 1000 mm – Swing over bed 360 mm – Swing over cross slide 215 mm Cgodpfey Ev Tkex Akcet – Swing in gap 540 mm – 45–1800 rpm – 2-speed motor – Spindle bore 51 mm – Longitudinal and cross feed – Digital position display (Sino) on three axes – Brake – Coolant system – Lighting – Safety cover – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: ready for operation (used), WEILER Condor VS 2 with new 3-axis digital readout from university (test laboratory) - New 3-axis digital readout - Guideways in "as new" condition - Centre height: 165 mm - Swing over bed: 330 mm - Distance between centres: 800 mm - Speed range: 28-2800 rpm - Automatic longitudinal / cross feeds - Spindle bore: 40 mm - Thread cutting / metric / imperial etc. - Collets / quick-clamping device incl. collets - 4-jaw chuck - Röhm - Face plate - Multifix toolpost with holders - Emergency stop - Chuck guard - Documentation Cgodoy Efqropfx Akcjt Dimensions: LxWxH 2x0.8x1.6 meters / Weight: 900 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: Codey D N Daspfx Akcjgt - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: good (used), functionality: fully functional, Technical Specifications HBX 360 Distance between centres (mm): 750 Centre height (mm): 180 Maximum diameter over bed (mm): 360 Maximum diameter over cross slide (mm): 180 Spindle bore (mm): 37 Maximum cross slide travel (mm): 180 Cross slide width (mm): 160 Tailstock quill travel (mm): 150 Tailstock quill diameter (mm): 46 Bed width (mm): 335 Compound travel (mm): 110 Compound width (mm): 110 Quick-change toolpost type Spindle taper type Tailstock Morse taper: MT5 Spindle speed (rpm): 50 to 3000 Spindle speed variator: Yes (hydraulic) Spindle motor power (kW): 4.5 Transverse feed range (m/min): 0.0125 to 5.6 Longitudinal rapid traverse feed range (m/min): 56 to 112 Thread cutting: Yes Metric threading range (mm): 0.5 to 56 Whitworth threading range (TPI): 1/2 to 56 Foot brake Electric supply: 380V three-phase Dimensions (mm): 2000 x 1000 x 1250 Weight (kg): 1300 Chuck: Manual Ø200 (3-jaw) Equipment: Cgsdpey D Ablofx Akcet - 2-axis Heidenhain digital readout - Machine lighting - 3-jaw manual chuck - Quick-change toolpost

Condition: as good as new (ex-display), WEILER COMMODOR 180 GSD / New Machine – Exhibition Model - Available from stock Csdpfx Aey Dc Tzokcogt - Exhibition machine / NEW – UNUSED - 3-axis digital readout - CE marking - Center height 180 mm - Swing over bed 380 mm - Swing over cross slide 215 mm - Distance between centers 1000 mm - Bar capacity 56 mm - Speeds / gearbox: 25 – 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting inch / metric etc. - Chuck guard - Tailstock / quill taper MK 4 - Quill stroke 150 mm - Coolant system - Multifix quick-change toolpost with insert - 3-jaw chuck 200 mm - Work lamp - Chip guard (rear) - Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000 kg Errors and omissions excepted

Condition: used, WEILER Commodor incl. 3-axis digital readout Heidenhain Cgsdpfx Akoy Dcppocet - 3-axis digital readout / Heidenhain - Center height: 180 mm - Swing diameter over bed: 330 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Spindle speeds: 25–2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / imperial / module etc. - Multifix toolpost with inserts - Chuck guard - 2x emergency stop - Three-jaw chuck - Chip guarding rear wall - Very well-maintained condition - Machine feet - Documentation Dimensions: LxWxH 2.3x1.2x1.6 m / Weight 1600 kg Errors and omissions excepted.

Condition: used, centre distance 1.270 mm turning diameter over bed 380 mm Cgodpfsy A Tc Rsx Akcjt turning dia. over slide 230 mm centre height 190 mm spindle tunring speed 45 - 2.000 U/min bed width 200 mm Bed height 2.120 mm bed length 305 mm spindle bore 52 mm dimensions 2,70 x 1,00 x 1,60 m machine weight ab. 1.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - 3-axis digital readout - 3-jaw chuck with internal and external grips - 2 live centers - 1 fixed center - 4 quick-change tool post - 1 steady rest - Drill chuck - Machine feet Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, functionality: fully functional, center height: 200 mm, PADOVANI PARALLEL LATHE 1000 X 200 MODEL: LABOR 200 Spindle bore: 52 mm Used, fully functional machine Csdey A Sthopfx Akcjgt Internal code: SVR 408

Condition: ready for operation (used), Year of construction: 1997, Lead and feed screw lathe / WEILER CONDOR B incl. 3-axis digital readout / Heidenhain - Machine from educational facility - Center height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 185 mm - Turning length: approx. 800 mm - Spindle speeds: 22 - 2800 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric, etc. - Bar capacity: 40 mm - Tailstock / quill taper: MT 3 - Electrical chuck guard - Multifix tool post with holders Cgedpfjy A Ey Uox Akcst - 3-jaw chuck - Forkardt - Machine lamp - Chip guard at rear - Bed stop - Machine feet - Documentation Dimensions (LxWxH): 1.8 x 0.8 x 1.6 meters / Weight: 1100 kg Subject to errors and input mistakes.

Condition: excellent (used), Year of construction: 2009, L & Z Lathe (used) Cgodey Axwgjpfx Akcjt Manufacturer: Knuth Model: DM 1000 A Year of manufacture: 2009 Centre height: 180 mm Centre distance: 1000 mm Swing over bed: 360 mm Swing over cross slide: 240 mm Swing in gap: 600 mm Spindle bore: 56 mm Spindle speed range: 30 – 1600 rpm Tailstock taper: MT 4 Quill diameter: 60 mm Quill stroke: 130 mm Motor power (spindle motor): 5.5 kW Bed width: 290 mm Machine weight: 1,500 kg Space requirements approx. L 2200 mm x W 1000 mm x H 1600 mm 3-jaw chuck 250 mm incl. jaws Multifix toolpost, size B incl. insert 3-axis digital readout (Knuth) Chip tray Coolant system Faceplate Fixed steady Travelling steady Machine feet The machine is in good condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Location of the machine: 48477 Hörstel

Condition: ready for operation (used), spindle bore: 56 mm, turning diameter: 360 mm, center height: 180 mm, WEILER Commodor B incl. 3-axis digital display Heidenhain -GS identification -3-axis digital readout / Heidenhain -Year of manufacture: 1991 -Center height: 180 mm -Swing diameter over bed: 330 mm -Distance between centers: 1000 mm -Spindle bore: 56 mm -Spindle speeds: 25-2000 rpm -Automatic longitudinal / cross feeds -Thread cutting / Metric / Inch / Module etc. -Multifix tool post with inserts -Chuck guard -2x Emergency stop -3-jaw chuck -Chip guard/rear wall -Very well maintained condition -Machine feet -Documentation Dimensions: LxWxH 2.3x1.2x1.6 meters / Weight 1600 kg Cgjdpfx Akoy Ak S Ascot Errors / omissions excepted.

Condition: new, Year of construction: 2026, turning diameter: 360 mm, turning length: 750 mm, quill diameter: 52 mm, Equipment: rotational speed infinitely variable, – Distance between centres 750 mm – Swing over bed 360 mm – Swing over tailstock 240 mm – Spindle bore 52 mm – Longitudinal and cross feed – Digital readout on two axes – Coolant system Cedpfx Ajyzuwtjkcogt – Lighting – Protective cover – Fixed chuck – Live chuck – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400 V