Printing House "Kopa"

Year of construction: 2002, condition: used, Hard cover book line Consisting of Hard cover book line Kolbus BF526 Year: 2002 Description: - Semi automatic setting - Starfeeder - Pre-heater - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine VBF EP 680 R Year: 2007 Description: - Right hand infeed - Delivery to the right Book stacker VBF BLSD 650 Itodpfszvfcysx Abnok Year: 2007 - Straight delivery: Solema (2007)

Year of construction: 1999, condition: used, Embossing machine Kolbus PE 312 Year: 1999 - Case pre-stacking conveyor - Feeder for cases - Case bending station - Foil transporting device, double - Matrix plate 1 - Counter stacker Itedpszvd U Iofx Abnjk - Delivery

Year of construction: 2005, condition: used, Case maker Kolbus DA 270 Year: 2005 Description: - Digital display - Board pre stacking conveyor - Centre strip infeed (stiff) - Centre strip infeed (flexible) Itsdpfezvd T Rox Abnsk - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Pressing station

Year of construction: 1980, condition: used, Cloth cutter Kolbus: KS 820 Year: 1980 Itodpfxjzvd N Ss Abnjk Standard equipped

Year of construction: 2002, condition: used, Book mark inserting machine Sigloch LEH-3 Year: 2002 Description: - Right hand infeed - Bookmark insert: 2 - Heated scissor Itedpfx Ajzvd Hqjbnek - Bypass-system - Delivery to the right

Year of construction: 2005, condition: used, End sheet tipping machine Sigloch VAM Year: 2000 - Infeed conveyor - Cold glue: HHS C-210 (nozzle) - End sheet tipping: 2 - Straight delivery (vertical) Book back gluing machine Sigloch SB-3000/2 Year: 2005 - Base for 1st spine glue system - Cold glue spine gluing - Intermediate drying station (infrared) - Base for 2nd spine glue system - Cold glue spine gluing - Hotmelt spine gluing - Premelter: Kolbus LH 370 - Back lining station - Conveyor (vertical) Ijdpfx Abjzvd Eaenotk Nipping machine Sigloch DNH Year: 2005 - 2 pressing stations

Year of construction: 2001, condition: used, Sewing machine Itedozvd A Ejpfx Abnjk Meccanotecnica Astronic 180/42 Year: 2001 Description: - Digital display: Uniop - Feeder - 4 + 4 opening possibilities - Delivery

Year of construction: 2000, condition: used, Sewing machine Meccanotecnica Astronic 180 Year: 2000 Description: - Digital display: Uniop Ijdpfjzvdyqjx Abnotk - Feeder - 4 + 4 opening possibilities - Delivery

Year of construction: 1997, condition: used, Sewing machine Isdezvdx Topfx Abnstk Meccanotecnica Astronic 180 Year: 1997 Description: - Digital display: Uniop - Feeder - 4 + 4 opening possibilities - Delivery

Condition: used, Year of construction: 2006, Format: 450 x 350 mm Itodpfx Aszu Spwebnek

Condition: used, Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11 Zusammentragmaschine / Broschürenfertigung MC-80a MC-80m SPF-11 FC-11 Booklet Maker / Brochure Finishing MC-80a MC-80m SPF-11 FC-11 Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator MC-80a MC-80m - 2 x 8 Stations Feeder Baujahr / Year 1998 - Serial-No. 042016 Format / Size min. 110 x 160mm - max. 318 x 470mm Grammatur / Paper weight 50-260g/qm Stapelhöhe / Infeed height Station 50mm Geschwindigkeit / Speed 5.100 Product/h Broschürenfertigung / Booklet Maker SPF-11 - FC-11 Itedpfx Ajzu Dm Uobnek Baujahr / Year 1998 - Serial-No. 128032 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Rietschle Auslage / Delivery - Rüttler / Jogger PJ-77 Geschwindigkeit / Speed 1.500 - 3600 Sets/h Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2016, condition: used, Year: 2016 Itedpezuzd Refx Abnjk Condition: good Counter: approx. 3,340,000 Configuration: - Creasing tool - Perforating tool, 11 TPI - 2 × perforating heads, 11 TPI Technical Specifications: - Feeder: suction belts - Feeder pile height: 180 mm - Minimum sheet size: 105 × 148 mm - Maximum sheet size: 375 × 660 mm; 375 × 1,050 mm with table extension - Paper weight – perforating: 80–300 gsm or max. 0.3 mm - Paper weight – creasing: 80–400 gsm or max. 0.4 mm - Maximum speed: 5,000 A4 sheets/hour Perforating - Maximum number of operations: 20 per sheet - Minimum spacing: 3 mm - Number of tools: 1 perforating tool Creasing - Maximum number of operations: 20 per sheet - Minimum spacing: 1 mm Multigraf Touchline CP 375 MONO is designed for perforating and creasing sheets with paper weights of up to 400 gsm. The machine is equipped with perforating tools for crosswise and longitudinal perforation in a single pass. Thanks to its interchangeable tools, the new Touchline CP 375 MONO can be quickly converted from a creasing machine to a perforating machine or vice versa at any time. The cross-perforating bar can be replaced with a creasing bar, allowing cross creasing, longitudinal perforation and partial longitudinal perforation in a single pass through the machine. Machine setup, including perforation, is fully automatic via the touchscreen. Sheet feeding is automatic and uses suction belts, and the machine can be equipped with double-sheet detection.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2019062, Used (2019), in very good condition termo printing calender with felt. Width: 2000 mm. Reliable Italian quality. Ideal for sublimation and textile finishing. Clean, properly maintained and fully functional. CHARACTERISTICS OF PRINTING CYLINDER: Diameter : 200 mm (7,87“). Width : 2.000 mm (78,74“). Working width: / 1.800 mm (70,87”) TECHNICAL DATA: Installed power: 14 kw/h Average electric consumption: 9 kw/h Iedpozuy Rvefx Abnotk Compressed air pressure: 3-8 bar Mechanic speed: 0.1 - 1.7 m/min Overall dimensions: width 3.110 mm (122,44“). length 1.250 mm (49,21“) height 1.650 mm (64,96”). Net weight: 950 kg Machine produced according to CE rules TENSION CONTROLS: Tension control for printing material: Entry: brake with manual adjustment and manual textile tensioner Exit: tangential winding on felt Tension control for printing paper: Entry: disk brake with pneumatic adjustment. Exit: winding with pneumatic device Tension control for protection paper: Entry: disk brake with pneumatic adjustment. Exit: tangential winding on felt Single motor NOMEX felt with manual tension adjustment system and automatic felt-centring device Incorporated system of felt protection in case of black out and/or compressed air lack

Year of construction: 2009, condition: used, Year: 2009 Condition: very good Counter: N/A Technical specification: - Width (mm) 780 - Height (mm) 1050 - Weight (kg) 162 - Power requirements 230 V / 50 Hz - Maximum output (cycles per hour) 1 – 4 numbering boxes 9 4 – 6 numbering boxes 5 7 – 8 numbering boxes 4 - Maximum number of numbering boxes 8 Iodpfx Abezuyfyonstk - Max. sheet size (mm) 460 x 460 - Min. sheet size (mm) 210 x 125 - Carbonless sets Maximum 7 sheets Minimum (gsm) 45 - Max. spacing of numbering boxes on the same collar Parallel 365 mm Convex 354 mm - Min. spacing of numbering boxes on the same collar Parallel (mm) 50 Convex (mm) 73.50 - Continuous reloading ✓ - Simultaneous perforating, creasing or slitting ✓ - Oscillating inking roller ✓ - Fine adjustment during operation ✓ - Infinitely variable speed ✓ Configuration: - 4 counters (7 digits) The Nummak S can process up to 9,000 sheets or sets per hour. The speed is infinitely variable. The rotary principle permits uninterrupted printing, which saves time and delivers better results. The sheet size can be chosen freely up to 460 mm x 460 mm. The number can be placed anywhere on the sheet or on the perforation. The powerful suction feeder can process a wide range of materials. Sets glued at the top edge can also be fed with the open edge first for simultaneous perforation parallel to the glued edge. Even carbonless sets of up to 7 sheets are no problem for the Nummak S. The oscillating inking roller is a standard feature and ensures a uniform ink application and permits use of different colours. Even if several numbering boxes are used, inking remains absolutely accurate. Since the sheets are fed from the bottom of the stack, additional sheets can be loaded “on the run”. All parts are easily and quickly accessible, and set-up and cleaning is done in mere moments. A fine adjustment of the machine can be made during operation. Numbering, perforating, creasing and slitting can be accomplished in one pass through the machine and without the sheets stopping.

Condition: good (used), Schuma Drive Conveyor Belts 37x310cm Made in Germany 380V Power Supply Iodpfx Abozurxrenstk 100% functional, in very good condition. Dimensions: 37x310cm, 40x300cm (total width). Price is for two units.

Condition: good (used), Year of construction: 2004, Built in 2004 Configuration: Left-hand delivery Equipped with: Left-hand delivery Mosca strapping unit Applications: Offset and gravure signatures Mechanical Infeed Speed: Maximum 1.0 m/s Cycle Time: Minimum 32 s/log Signature Sizes: Minimum: 200 × 110 mm (7 7/8" × 4 3/8") Maximum: 480 × 320 mm (18 7/8" × 12 5/8") Page Count: Depending on paper quality and basis weight Minimum: 4 pages Maximum: 144 pages Ijdpfozub Uvsx Abnetk Compressed Log Length: Standard machine: 800 to 1,200 mm (31 1/2" to 47 1/4") With special insert (optional): 500 to 860 mm (19 3/4" to 33 7/8") Strapping System: Mosca Strapping Material: 12 mm (15/32") wide PP or PET strap Endboard Hopper Capacity: Maximum 100 endboards with 10 mm (3/8") thickness Endboard Thickness: Minimum: 5 mm (3/16") Maximum: 13 mm (1/2") Endboard Insertion: Automatic Shingle Spacing: Minimum 30 mm (1 1/8") Shingle Side Variation: Maximum ±15 mm (5/8") Power Consumption: Approx. 4.5 kW (with manual crane) Approx. 4.0 kW (without manual crane) Air Consumption: 5 Nm³/h at 6 bar (3 cfm at 90 psi) Machine Weight: 4,100 kg (9,000 lb)

Year of construction: 2026, condition: new, functionality: fully functional, Transforms excess corrugated cardboard into valuable packaging material! Resource-efficient. Itedpfxszt R Tlj Abnsk Safely packaged goods. Satisfied customers. Available in intake widths of 325 / 425 / 500 mm: TECHblade 325 Unit price, net: 1,900 euros TECHblade 425 Unit price, net: 2,130 euros TECHblade 500 Unit price, net: 2,480 euros

Year of construction: 2026, condition: new, functionality: fully functional, The all-rounder for roll handling. Itodszt R Nyepfx Abnek Are your employees suffering from back pain? Not anymore with the Techlift M! Safe and precise lifting and lowering of the roll. Vertical movement of the roll within the production process. Reliably prevents telescoping.

Year of construction: 2026, condition: new, functionality: fully functional, Precise, ergonomic lifting and lowering. The transfer height from mandrel to mandrel never matches unless you use the TECHlift S. Millimeter-precise vertical positioning of the roll in the production process. Ergonomically beneficial and back-friendly. Time-saving and environmentally friendly. Ijdpfszt R H Sex Abnjtk

Year of construction: 2026, condition: new, functionality: fully functional, Achieve high efficiency with precision! The core cutter (standard 76 mm / 3 inches) features an automatic core magazine. The menu is in German. Iodezt Rxhepfx Abnotk Process-controlled feeding of the core material and precise cutting to pre-programmed width and number of cores. Additional core adapters are available in 25 / 40 / 50 / 101.2 mm.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Longitudinal seam, folding base, double edge, 4 + 6-point gluing, electronic top gluing system HHS X-tend² with 6 applicator heads, lower gluing system on the left side, mechanical overlap folding with timed/chain alignment, vibrator with compressed air at the feeder, toothed gauge at the feeder, additional center transport in the pre-breaker, pre-breakers on the right and left, kicker, counter, additional center transport in the folding section, Dünki silicone tape dispenser, pneumatic, timed press belt. Ijdpeztq Ezofx Abnotk The machine is in very good condition and can be inspected (disassembled). Max. 1100 mm, min. 126 mm.

Condition: used, Double Sheet Control for Horizon VAC-100/VAC-60 Collator, pack of 5 sensor Optimize the precision of your Horizon VAC-100 or VAC-60 collating machine with our high-quality replacement double sheet control Itedpfeztpnujx Abnjk Compatible with Horizon VAC-100 and VAC-60 models Sensor for reliable double sheet control Ensures precise error detection and smooth operation Easy replacement for minimal downtime This sensor is an important component for quality assurance in your Horizon collator. It ensures that your machine continues to operate efficiently and precisely by reliably detecting double sheets and preventing faulty production. Invest in the accuracy and reliability of your print finishing. Order now and keep your Horizon VAC-100 or VAC-60 in top shape!

Year of construction: 2022, condition: used, Year: 2021/2022 Condition: very good, functional Counter: 13M envelopes Machine Type: Automatic mailing and fulfillment line for collating, inserting and sealing envelopes with the capability of processing rigid and thick products. - Manufacturer: CMC S.p.A., Italy - Model: CMC Smart Mailer / Rigid Mailer Special Technical Specifications: - Maximum mechanical speed: up to 4,000 envelopes/hour - Envelope width: 250–350 mm - Envelope length: 280–350 mm (including flap) - Product thickness: min. 2 mm / max. 25 mm - Recommended envelope flap height: 50–70 mm Configuration: - 2× A15 – Electronic hopper feeders for rigid and thick products - A21F – Photocell-controlled thickness gauge - 3× A14Q – Sheet feeders for inserts - SEP1 – Rotary separation disc - F15 – High-speed sheet feeder - A14_Env_L – Large envelope feeder - Vacuum Belt – Vacuum conveyor - HM1 – Automatic programmable hot-melt gluing system with 1 glue gun - RA20_i – Conveyor for collation of staggered products - PC_Add Special – Software for print verification, barcode reading and database management - 2× SDC – Sound-deadening boxes for vacuum pumps - F15 High-Speed Sheet Feeder - Minimum format: 80 × 110 mm - Maximum format: 210 × 300 mm - Minimum paper weight: 70 gsm - Maximum product thickness: 2 mm - Loading capacity: up to 500 sheets - Double-sheet detection system - Brushless motor drive - A15 Hopper Feeder - Product length: 120–320 mm - Product width: 100–300 mm - Product thickness: 1–25 mm - Suitable for rigid products, stitched products and bound booklets. - A14Q Sheet Feeder - Product length: 100–210 mm - Product width: 110–300 mm - Product thickness: from 1 sheet (70 gsm) up to 4 mm - Minimum paper weight: 70 gsm - Utilities - Main power supply: 14 kW, 400 V AC, 27 A, 3-phase + N + PE - Auxiliary power supply: 3 kW, 230 V AC, 15 A - Compressed air: approx. 600 l/min at 6 bar - Clean, dry and oil-free compressed air required. Machine Dimensions: According to the machine layout, the main production line has an overall length of approximately 10,100 mm with a maximum overall width of approximately 4,300 mm. The layout is indicative and subject to final machine configuration. Itsdpfx Abeztc Afenok Machine Description: The CMC Smart Mailer is a high-performance automatic mailing and fulfillment system designed for collating, verifying, inserting and sealing envelopes. The machine is capable of processing single sheets, inserts, stitched brochures, bound booklets and other rigid products up to 25 mm thick. Equipped with automatic thickness control, double-sheet detection, barcode reading, print verification, database management software and programmable hot-melt gluing, the Smart Mailer ensures maximum production efficiency, accuracy and reliability. With a mechanical speed of up to 4,000 envelopes per hour, it is an ideal solution for direct mail, transactional printing, fulfillment and document mailing applications.

Condition: ready for operation (used), Offered for sale is an M&R Economax D conveyor dryer. Heating capacity: 7.5kW, belt width: 610mm, heat chamber length: 1140mm. Dimensions X/Y/Z: approx. 2400mm/840mm/1350mm, weight: approx. 227kg. An inspection is possible by prior arrangement. Itsdpfezta E Dsx Abnok

Condition: used, Offer consist of: Calender production system -Rilecart R 800 -Rilecart R 422 Itjdjzru Scepfx Abnsk -Rilecart FAR-5/55 MK2 -SETMASTER -Kugler All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.