Innovatív Térburkolatfejlesztő Kft.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 1,600 t, table width: 2,800 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB The machine offered here is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Njdpfxsyxhq Ie Ahvskw Only components from leading European manufacturers were used in the refurbishment. A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions. The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required. Technical Data Manufacturer: MW/SCMB Model: PHD1600 T Press force (ram): 16,000 kN Stroke (max.): 1,200 mm Distance between ram and table: 2,350 mm Ram plate (dimensions): 5,000 × 2,800 mm Ram ejector force: 2,000 kN Ejector stroke (max.): 150 mm Ejector plate (dimensions): 3,700 × 1,300 mm Main motor power: 3 × 110 kW at 1,500 rpm Auxiliary motor power: n/a (1,500 rpm) Sliding table (dimensions): 5,000 × 2,800 mm Rapid approach speed: 300 mm/s Working speed (50% nominal force): 34 mm/s Working speed (100% nominal force): 17 mm/s Return speed: 300 mm/s Return force (gross): 1,660 kN Lower cushion force: 4 × 1,000 kN Lower cushion stroke (max.): 280 mm Lower cushion dimensions: 3,920 × 1,680 mm The above specifications are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive. Tool making (Tryout / Spotting)

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern - Sliding table travel: 3000 mm Nsdpfx Ahsyxhp Dovskw - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, total height: 3,200 mm, total width: 1,410 mm, total length: 2,050 mm, table width: 805 mm, table length: 1,205 mm, overall weight: 8,000 kg, type of input current: three-phase, DGUV certified until: 08/2020, oil tank capacity: 250 l, pressing speed: 11 mm/s, Equipment: documentation/manual, safety light barrier, For sale: fully operational and complete Ageo 160t hydraulic press. Full documentation and maintenance logbook are available. On-site inspection possible. VAT invoice provided. Nkedpfx Aheyxg D Hsvow

Condition: used, Year of construction: 2015, Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Nedpfx Aeyw Twkjhvskw Weight of machine approx.: 533 ton Standard configuration Moving bolster extending forwardsCutting impact bumper dampingSIEMENS S7-300 controller

Condition: used, Year of construction: 1978, Pressure total: 630 ton Stroke: 900 mm Daylight: 1550 mm Table surface area : 2500 x 1730 mm Slide area: 2500 x 1730 mm Die cushion capacity in table: 230 ton Die cushion stroke: 400 mm Die cushion pad area: 2150 x 1540 mm Approach speed: mm / sec Working speed: mm / sec Nksdpfxoyw Rg Ao Ahvjw Return speed: mm / sec Oil volume: 2000 l Required power: kW Weight of machine approx.: 200 ton

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Nkodpfjyw Ik Sox Ahvow Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 2015, functionality: fully functional, total height: 9,000 mm, total width: 8,000 mm, total length: 8,000 mm, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming Nedpsyw Ah Esfx Ahvekw This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting)

Condition: good (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: Cybelec, bending force (max.): 400 t, working width: 4,200 mm, stroke length: 300 mm, ALIKO 400/4200 Press Brake – Modernized in 2020 For sale: a well-maintained Finnish-made Aliko 400/4200 press brake, thoroughly modernized in 2020. Modernization included: New control system Electric crowning Nkodpfeywk Slex Ahvjw New back gauge rollers New cylinder seals The machine is in good condition and a good set of tooling is included in the sale. The machine is operational and viewings can be arranged by appointment.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total height: 4,600 mm, total width: 3,400 mm, total length: 1,900 mm, pressing force: 200 t, table width: 2,000 mm, table length: 1,000 mm, overall weight: 26,000 kg, die cushion stroke: 300 mm, with 60-ton draw cushion Herblitz feed: Max. material width: 550 mm Max. material thickness: 6 mm Siemens control SPS7, 1500F Nsdpfxsyv A Ipj Ahvekw

Condition: excellent (used), Year of construction: 1991, Hydraulic press Walther WUP Table: 1000 x 450 mm Stroke: 350 mm Nkjdpfxeyvy Nkj Ahvsw Max. adjustable table height: 800 mm Pressure: 60 t

Condition: used, Year of construction: 1987, operating hours: 90,041 h, functionality: fully functional, machine/vehicle number: 10064, total height: 4,150 mm, table height: 1,000 mm, installation height: 600 mm, total width: 1,600 mm, total length: 2,330 mm, pressing force: 200 t, table width: 800 mm, table length: 1,290 mm, overall weight: 21,000 kg, ram plate width: 800 mm, ram plate length: 1,300 mm, type of input current: three-phase, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, stroke length: 300 mm, oil tank capacity: 1,300 l, control cabinet width: 400 mm, input voltage: 380 V, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Nkjdpfxjyvgrho Ahvew Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Condition: used, functionality: fully functional, pressing force: 1,000 t, Cavenaghi & Ridolfi 1000-ton hydraulic press, Italian-built machine, suitable for industrial pressing operations and also used as a die tryout press. According to the nameplate, the following data is indicated: Manufacturer: Cavenaghi & Ridolfi Location: Limbiate (Milan), Italy Nsdpfjyuqm Nsx Ahvjkw Series: 680429 Serial number: 2909 Pressing force: 1000 tons The machine is complete with control panel as shown in the photo.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 63500 € 1200.15 € 70 to 500 mm 900x700 mm 600 mm 25 mm/s 6 mm/s 4 kW 1140 mm 940 mm 2350 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression Njdpfx Aoynnfpjhvokw • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 164500 € 3109.05 € 260 to 500 mm 1400x1000 mm 600 mm 75 mm/s 5 mm/s 60 mm/s 22 kW 2800 mm 1650 mm 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation Njdpfxeynm I Nj Ahvjkw stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 123000 € 2324.7 € 170 to 500 mm 1200x700 mm 600 mm 110 mm/s 7 mm/s 70 mm/s 19 kW 2700 mm 1600 mm Nksdpfx Aeynm I Aohvjw 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 78000 € 1474.2 € 85 to 500 mm 900x600 mm 600 mm 105 mm/s 7 mm/s 58 mm/s 7.5 kW 2250 mm 1150 mm 2400 mm 4-pillar guide Nedoynm Ivspfx Ahvjkw table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 71300 € 1347.57 € 60 to 500 mm 800x500 mm 600 mm 120 mm/s 8 mm/s 58 mm/s 5.5 kW 1100 mm 1100 mm 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation Nodpfxoynm Ipj Ahvskw stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 65000 € 1228.5 € 35 to 500 mm 800x500 mm 600 mm 125 mm/s 9 mm/s 68 mm/s 4 kW 1100 mm 1100 mm Nksdpfx Aheynm Iievew 2300 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 103500 € 1956.15 € 150 to 500 mm 1250x1000 mm 600 mm 23 mm/s 4 mm/s 5.5 kW 1520 mm 1270 mm 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € Nkjdpfx Ahjynm Icovew on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 74800 € 1413.72 € 100 to 500 mm 1000x800 mm 600 mm 26 mm/s 5 mm/s 4 kW 1260 mm 1060 mm 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € Nkedpfx Asynm H Sjhvow on Request Pressur switch € on Request

Condition: used, Year of construction: 1983, pressure 120/15 t distance between columns 860 mm stroke 170 mm table-size 860 x 600 mm dayligth 350 mm max. distance table - ram 520 mm ram head dimension 860 x 600 mm hole in the table 200 x 140 mm table height over floor 850 mm total power requirement 25 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,3 x 1,7 x 3,4 m Maximum ram pressure: 120 kN Maximum pull-out pressure: 15 kN Sick light curtain Safety distance: 180 mm Nksdoym Dz Dopfx Ahvjw Maximum overrun: 15 mm

Condition: used, Year of construction: 1972, machine/vehicle number: 703, total height: 3,200 mm, table height: 1,160 mm, total width: 1,600 mm, total length: 2,000 mm, pressing force: 200 t, table width: 1,200 mm, table length: 730 mm, overall weight: 11,280 kg, distance table to ram: 870 mm, type of input current: three-phase, working height: 1,160 mm, clearance between the columns: 1,280 mm, stroke length: 620 mm, working range: 1,280 mm, drop-through hole in table: 30 mm, oil tank capacity: 300 l, input voltage: 380 V, control cabinet height: 670 mm, control cabinet length: 300 mm, Equipment: documentation/manual, Hydraulic Press GIGANT (Costruzioni Oleodinamiche) 200-ton, operational and available for sale. Machine equipped with drilled/slotted worktable for clamping and setups, complete electrical cabinet, and hydraulic system. Documentation available (manual/schematics). Main specifications: - Pressing force: 200 t - Overall dimensions (W×D×H): 1600 × 2000 × 3200 mm - Weight: 11,280 kg - Table height from floor: 1160 mm - Max opening (daylight): 870 mm - Min opening (daylight): 250 mm - Ram stroke: 620 mm (870–250) - Usable clearance between columns (X): 1280 mm - Usable clearance front/rear (Y): 600 mm - Usable working area: 1280 × 600 mm Table / clamping: - Through holes: Ø 30 mm - T-slots: 2 × (730 × 20 mm) + 2 × (1200 × 20 mm) Electrical / hydraulic system (nameplate data): - Power supply: 380 V – 50 Hz (three-phase) - Motors: 15 + 15 HP - Oil tank: 300 L (schematics/manual) GTP 200/2-E configuration with dedicated circuit and available electrical/hydraulic diagrams. Electrical cabinet (external dimensions): - 670 × 500 × 300 mm (H×W×D) Condition: used Documentation: yes (manual/schematics). Nkedpfxoyl Nrro Ahvow Transport: at buyer’s expense, loading by seller.

Condition: used, Year of construction: 1998, Pressure 63 t distance between columns 1000 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 850 mm table surface area 980 x 500 mm Nsdsylzx Dspfx Ahvskw table height above floor 850 mm ram surface 130 mm speed down 400 mm/s speed up 461 mm/s working speed 14 - 97 mm/s power requirement 15,0 kW Weight 5,0 t Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: excellent (used), functionality: fully functional, installation height: 500 mm, pressing force: 120 t, table width: 600 mm, table length: 1,000 mm, operating speed: 59 mm/s, overall weight: 6,000 kg, reverse speed: 180 mm/s, distance table to ram: 800 mm, clearance between the columns: 850 mm, stroke length: 300 mm, operating pressure: 290 bar, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Nkedpjylk Eajfx Ahvew

Condition: used, Year of construction: 1954, functionality: fully functional, Used Industrial Press Machine SÜDDEUTSCHE MASCHINENBAU Gesellschaft m.b.H. – Press Type HZ PR150-1000/850 – Year of manufacture: 1954 – Manufacturer: Süddeutsche Maschinenbau Gesellschaft m.b.H., Wiesental/Kreis Bruchsal (renowned German machine builder) – Press force: approx. 150 t (maximum pressing force, equivalent to 1,470 kN) – Working area: approx. 1000 mm × 850 mm (usable height/width, according to type code) – Massive H-frame construction – sturdy and industrial-grade – Mechanically/hydraulically driven pressing or forming press for metal and sheet metal applications – Large clamping or working surface, suitable for pressing, punching, forming, assembly, and joining operations – Robust, solid design; ideal for workshops, series production, or repair operations Condition: Used / operational / technically inspected (please specify condition further: fully functional, overhauled, requires maintenance, etc.) Optional equipment: (Tool holders, clamping devices, controls, safety guards – please specify if available) Fields of application: ✔ Metal forming ✔ Assembly of interference and press fits ✔ Drawing, bending, upsetting, and riveting processes ✔ Workshop and maintenance operations Nkedpjyk Sn Hefx Ahvew