PPHU "Bergel" Andrzej Bergel

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Ndodpfx Ahjzwcncekea Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: good (used), functionality: fully functional, Year of construction: 1993, Well-maintained, used plate shear from Amada. Type: GPX 1230 Capacity: 3050 x 12 mm Equipped with a high-precision table at the rear. Ndodpfx Ahszvqprsksa

Condition: good (used), functionality: fully functional, working width: 2,050 mm, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: motor-driven, power: 9 kW (12.24 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,500 kg, total length: 2,600 mm, Equipment: angle stop, emergency stop, foot remote control, Well-maintained Promecam GH1020 shear. Cutting length 2050 mm and 10 mm steel capacity! Can be inspected by prior arrangement. Nedpfjzvhktsx Ahkoda

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Robosoft, controller model: PC90, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 14 1/min, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, back gauge: 1,000 mm, overall weight: 8,500 kg, total length: 4,100 mm, total width: 2,400 mm, total height: 2,300 mm, Maximum sheet thickness: 12 mm Max. cutting length: 3100 mm Stroke length at full length: 7 mm Stroke length at short length (1000 mm): 14 Cutting angle: 0.5 - 3° Length of back gauge: 0 - 1000 mm Number of lower clamps: 18 Operation: Mechanical or hydraulic (Hydraulic) Power: 24 kW Nedpozvf Hrofx Ahkeda Length: 4100 mm Width: 2400 mm Height: 2300 mm Weight: 8500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS Ndsdpfxezuwvve Ahkja GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, Darley hydraulic shear Model : GS 3100 x 10 mm. Ndedpfx Ahjzuvx Ajkoa Year : 1997 Kapacity : 3100 x 10 mm. Power back gauge with digital and presetting Blade angle setting Blade gap setting Front arms Extra set of blades Light guard Machine leveling foot

Condition: good (used), LVD Guillotine Shear Nsdpfezt Tmnjx Ahksda Brand: LVD Type: MCVN 31/13 Year of manufacture: 12-81 Cutting capacity for steel: 13mm Cutting length: 3100mm Automatic angle adjustment Adjustable cutting clearance Power: 11KW Condition of blades: good Machine weight: 11000KG Length: 3900mm Width: 3550mm Height: 2350mm

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Njdpfx Ahszr Rqnjkeda Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94102, Offer 26181 Technical Data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable, motorized 0.5 - 3 ° - Manual cutting gap adjustment - Number of hydraulic clamping cylinders 15 pcs - Motorized rear stop with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW Ndodpfxozruf Ne Ahkea - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 7500 kg - Including: - Electronic foot switch - Cutting line illumination

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system Nedpfx Asznvgmehkjda capacity 3000 x 12 mm power 22.5 kW electric stops weight 8500 kg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition Ndodpfx Ajzlpahshkoa - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Nedezkvx Uepfx Ahkoda Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 800 h, control type: NC control, controller manufacturer: Delem, controller model: DAC-362, working width: 4,050 mm, sheet thickness (max.): 10 mm, Delem DAC-362 NC-control programmable limit stop automatic cutting crack adjustment automatic cutting angle adjustment The machine has only 800 working hours Ndsdpozkty Aofx Ahkja Technische Daten / technical details: Schnittlänge / max. cutting length 4050 mm Schnittleistung / cutting capacity 10 mm Ausladung / overhang 210 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 15 kW Gewicht der Maschine ca. / weight 18000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 12 mm, power: 22 kW (29.91 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,000 kg, total length: 4,500 mm, total width: 2,600 mm, total height: 2,100 mm, tool weight: 31,500 g, working length: 3,000 mm, VOLZ EURO-CUT 12 x 3050 sheet metal shear Nedpfx Aozkhywshksda - Rated performance, sheet metal thickness, steel: 450 N/mm² - Sheet metal thickness: 12 mm - Max. speed: 88 mm/s feed rate Please note: the item must be picked up on a date to be determined between September 15 and September 17, 2026. FCA D-76474 Au am Rhein – loaded onto a truck.

Condition: used, BYSTRONIC VR 13-31, 3M X 13MM CAPACITY Nedpezh Rd Tofx Ahkjda

Condition: used, functionality: fully functional, Year of construction: 2009, control type: PLC-controlled, Hydraulic plate shear Manufacturer: DURMA, Type: SB 3013 NT Year of manufacture: 2009 Ndjdpfx Aszhwfwshksa Technical data Manufacturer: DURMA Type: SB 3013 NT Year of manufacture: 2009 Cutting length: 3100 mm Sheet thickness: 13 mm Stroke: 130 mm Stroke rate: max. 13/min. Dimensions: approx. L 4.25 x W 2.40 x H 2.40 m Weight: approx. 12 t Equipment • Controlled back gauge up to 1000 mm, can be pivoted out of the way • Angle gauge • Safety light curtain for the rear of the machine • Central cutting gap adjustment • Foldable finger guard 1000 mm • Siemens PLC control • Ball rollers in the support table All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch Ndsdpfjzd H U Hsx Ahkja - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: -

Condition: good (used), Maqfort HGD 3013 Ndedpjzdzn Uefx Ahksa 3200x13mm Runs well, but the back gauge needs to be checked!

Condition: good (used), functionality: fully functional, Year of construction: 1993, For sale is a panel shearing machine from the manufacturer LVD. Technical data: Manufacturer: LVD Cutting width: 3,000 mm Max. cutting thickness: 13 mm (steel) Back gauge: 1,000 mm Weight: approx. 9,000 kg The machine is currently powered and can be inspected by prior appointment. A functional test on-site is possible. Nedpfszb Rt Nsx Ahkjda Further information is available upon request. Subject to changes, errors and prior sale. Available from week 30.

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: P40T 5,7", working width: 3,100 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, back gauge adjustment: CNC-controlled, power: 37 kW (50.31 HP), Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HGM B20-3100 – 20 mm x 3100 mm Hydraulic Guillotine Shear The HGM B20-3100 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, shipbuilding, the energy sector, and high-capacity metalworking applications. It features a 20 mm sheet metal cutting capacity and a 3100 mm cutting length. Thanks to the ELGO P40T touch-screen CNC control unit, motorized back gauge system, Rexroth hydraulic system, and dual-speed cutting technology, it offers high performance and precise cutting. Standard Features Throat Depth: 250 mm Cutting Length: 3100 mm Cutting Angle: 2.75° Distance Between Columns: 3410 mm Cutting Capacity: 20 mm ELGO P40T 5.7” Touch-Screen CNC Control Unit 5.7” TFT touch screen Manual operating mode Single-part processing Program memory Up to 2A digital outputs Automatic calculation of cutting angle and pressure based on material Ndsdpfx Ahozbyupskoa Automatic cutting program Rear sheet support system RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Back Gauge Retraction System Automatic lifting for parts exceeding 1000 mm CRONOSSTECH X-axis Motorized NC-Controlled Back Gauge X-axis travel distance: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body construction Hardened ball screw Optionally available with 1250 mm or 1500 mm Front Support Arms 1000 mm length Scale measuring system T-slot Retractable stopper Retractable Front Finger Guard System 1000 mm retractable front guard cover Optional full-size retractable guard system Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 – SILCL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection class 24V DC power supply Emergency Stop Buttons Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) CRONOSSTECH Premium Front and Rear Cabin Guards Professional appearance Wide field of vision Ergonomic design Rexroth Hydraulic System Dual-Speed Cutting System Two different cutting speeds Faster operation on short parts High-speed cutting up to 60% of maximum capacity Energy-saving standby mode Optional Features 1250 mm or 1500 mm X-axis back gauge Full-size retractable front guard system Technical Specifications Cutting Capacity (450 N/mm²): 20 mm Cutting Capacity (700 N/mm²): 13 mm Cutting Length: 3100 mm Cutting Angle: 2.75° Number of Pressure Cylinders: 17 Cutting Speed / Fast Mode: 6 / 9 hpm Distance Between Columns: 3410 mm Table Height: 925 mm Table Width: 605 mm Throat Depth: 250 mm Back Gauge Travel (X-axis): 1000 mm Machine Length: 4790 mm Machine Width: 3850 mm Machine Height: 2540 mm Oil Tank Capacity: 495 L Motor Power: 37 kW Machine Weight: 19 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: ELGO P40T 5.7”, working width: 3,100 mm, stroke rate (min.): 14 1/min, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, power: 22 kW (29.91 HP), Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, HGM B13-3100 – 13 mm x 3100 mm Hydraulic Guillotine Shear The HGM B13-3100 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for metal processing, steel construction, machine manufacturing, and general sheet metal processing applications. It features a 13 mm sheet metal cutting capacity and a 3100 mm cutting length. Thanks to the ELGO P40T touch screen NC control unit, motorized back gauge system, Rexroth hydraulic system, and double-speed cutting technology, it offers precise and efficient cutting. Standard Features Throat Depth: 250 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Distance Between Columns: 3340 mm Cutting Capacity: 13 mm ELGO P40T 5.7” Touch Screen NC Control Unit 5.7” TFT touch screen Manual operation mode Single-piece processing Program memory Up to 2A digital outputs Automatic blade gap, cutting angle, and pressure adjustment calculation based on material Automatic cutting program Back sheet support system RTS (Return To Sender) function Manual Blade Gap Adjustment System Programmable Back Gauge Retraction System Automatic lifting for parts larger than 1000 mm CRONOSSTECH X-Axis Motorized NC Controlled Back Gauge X-axis travel distance: 1000 mm Speed: 150 mm/sec Accuracy: ±0.05 mm Steel body Hardened ball screw spindle Front Support Arms 1000 mm length Ruler T-slot Retractable stopper Retractable Front Finger Guard System (1000 mm) Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) CRONOSSTECH Premium Front and Rear Guard Rexroth Hydraulic System Double-Speed Cutting System Energy-Saving Standby Mode Optional Features Automatic Blade Gap Adjustment System (ELGO P40T) Pneumatic Sheet Support System (Type 1 - Double Position) Nodszbqyispfx Ahkoda 1250 mm or 1500 mm X-axis back gauge 1500 / 2000 / 3000 mm front support arms Full-length retractable front guard system Technical Specifications Cutting Capacity (450 N/mm²): 13 mm Cutting Capacity (700 N/mm²): 8 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Number of Pressure Cylinders: 14 Cutting Speed / Fast Mode: 9 / 14 hpm Distance Between Columns: 3340 mm Table Height: 880 mm Table Width: 620 mm Throat Depth: 250 mm Back Gauge Travel (X-Axis): 1000 mm Machine Length: 4860 mm Machine Width: 3585 mm Machine Height: 2300 mm Oil Tank Capacity: 265 L Motor Power: 22 kW Machine Weight: 11.5 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: P40T 5.7”, working width: 4,000 mm, cutting angle (min.): 2.1 °, stroke rate (min.): 15 1/min, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, back gauge adjustment: CNC-controlled, power: 22 kW (29.91 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Key Advantages ✔ 13 mm sheet metal cutting capacity (450 N/mm²) ✔ 4000 mm cutting length ✔ ELGO P40T 5.7” touchscreen NC control unit ✔ NC-controlled motorized back gauge system ✔ Program memory ✔ Automatic cutting program ✔ Two-speed cutting system ✔ Energy-saving standby mode ✔ Rexroth hydraulic system ✔ Premium front and rear guard system ✔ Transfer table and ball bearing conveying system ✔ Shadow light cutting line ✔ Heavy-duty steel frame body Standard Features ELGO P40T 5.7” Touchscreen NC Control Unit 5.7” TFT touchscreen Manual operation mode Single-piece processing mode Program memory Up to 2 digital outputs Automatic angle, pressure, and blade clearance calculation based on material thickness Automatic cutting program Rear sheet support system control RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Back Gauge Retraction System Automatic lifting function for parts larger than 1000 mm CRONOSSTECH X-Axis Motorized NC Controlled Back Gauge System NC-controlled automatic X-axis movement 1000 mm travel distance 150 mm/sec speed ±0.05 mm positioning accuracy Steel frame body Hardened ball screw spindle Front Support Arms 1000 mm length Scale measurement system T-slot structure Retractable stop elements Retractable Front Finger Guard System 1000 mm retractable front guard cover Upper Blade 2 cutting edges 450 N/mm² material capacity Lower Blade Nsdpfxszbqw Ie Ahkoda 4 cutting edges 450 N/mm² material capacity Foot Pedal Custom-designed pedal with emergency stop function Simultaneously activates the pressure cylinders and cutting motion Rear Safety System (except CE) Model: EOS2E 2BX 2 laser beams Type 2 – SIL1 safety level 510 mm scanning height 3 ms response time IP65 / IP67 protection class Operating temperature: -30°C / +55°C 24V DC power supply Emergency Stop Buttons Shadow Light Cutting Line Ball Transfer Table Electrical Equipment Schneider or Siemens 400V / 50Hz CRONOSSTECH Premium Guard System Front and rear guard cabinets Wide viewing angle Ergonomic operation Professional industrial design Hydraulic System Rexroth hydraulic block Two-Speed Cutting System Two different cutting speeds High efficiency for short parts High-speed operation up to 60% of maximum cutting capacity Energy-Saving Standby Mode Optional Features Automatic Blade Clearance Adjustment System ELGO P40T touchscreen control integration Automatic blade clearance adjustment based on sheet thickness Pneumatic Sheet Support System Type 1 Dual-position system Extended X-Axis Back Gauge 1250 mm 1500 mm Extended Front Support Arms 1500 mm 2000 mm 3000 mm Full-Size Retractable Front Guard System Technical Specifications Cutting Capacity (450 N/mm²): 13 mm Cutting Capacity (700 N/mm²): 8 mm Cutting Length: 4000 mm Cutting Angle: 1.8° Number of Pressure Cylinders: 18 Cutting Speed / High-Speed Mode: 9 / 15 hpm Distance Between Columns: 4310 mm Table Height: 930 mm Table Width: 660 mm Throat Depth: 250 mm Back Gauge Travel Distance (X): 1000 mm Machine Length: 5665 mm Machine Width: 3785 mm Machine Height: 2380 mm Hydraulic Oil Tank: 350 Liters Motor Power: 22 kW Machine Weight: 18.5 tons

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11.205.6002, control type: PLC-controlled, working width: 6,100 mm, sheet thickness (max.): 10 mm, power: 45 kW (61.18 HP), overall weight: 40,000 kg, total length: 70,000 mm, total height: 3,500 mm, Equipment: emergency stop, type plate available, used Helmut Lotze hydraulic plate shear Ndjdpoy Tixpsfx Ahkea Price negotiable

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Ndjdpfx Ahey Siftjkoa

Condition: like new (used), functionality: fully functional, CMU Shear Nedey R Diwjpfx Ahkeda 3000 x 8/10 Model 2E0 6/30 Motorized Backgauge Blade Angle Adjustment Used Machine Internal Code: SER 63