Kühn Metallverarbeitung

Condition: used, Year of construction: 2007, Mazak Nexus HCN 6000-II Twin Pallet Horizontal Machining Centre. S/No. 196442 (2007) with Mazatrol Matrix Nexus Control, Pallet Size 500 x 500mm, 60 Position ATC, High Pressure Coolant & Filtration System, Through Spindle Coolant, Spindle Speed 7000rpm, Spindle Taper CAT40, Rinishaw Tool Setter, Swarf Conveyor. Please Note: Back-End Spindle Tool Holders Only, Consumable Tools Not Included. Country of Origin: Japan Gkedpfx Afsxnl Adeijc Location: This lot is located in Bornago, Italy. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Technical Specifications: • Power supply: 3-phase / 50 Hz • Voltage: 400 V • Control voltage: 24 V • Rated current: 68 A Included Equipment: • Bar feeder IEMCA Master 880 MP/33 L Serial number: 020721SA07 Year of manufacture: 2007 Air pressure: 6 bar Voltage: 400 V / 3 ~ / 50 Hz Current: 6 A Weight: 1,360 kg Manufacturer: IGMI S.p.A. (BUCCI Industries), Faenza, Italy Gkjdpexnlv Rofx Afisc

Condition: used, Year of construction: 2001, Technical Specifications: • Power supply: 3 Ph / 50 Hz • Voltage: 400 V • Control voltage: 24 V • Rated current: 76 A • Total power: 42 kW • Machine weight: 4,800 kg • Electrical cabinet weight: 440 kg Included Equipment: • Bar feeder IEMCA Master 880/33R P Serial number: 0200141S02 Year of manufacture: 2001 Supply voltage: 380 V / 3 Ph / 50 Hz Control voltage: 220 V / 24 V Power consumption: 6 A Machine weight: 120 kg Godpfsxnlk Usx Afijkc

Condition: used, Year of construction: 2022, DMG Mori NH5000DCG Horizontal Twin Pallet Machining Centre. S/No. NH503211202 (2022) with F31iB Control, Full B Axis (0.001 deg), Travel X/Y/Z = 730/730/850mm, Rapids X/Y/Z = 50 m/min, Pallet Size 500 x 500mm, 120 Position ATC, Spindle Speed 14,000rpm, Spindle Taper BT40, Magazine Tool Breakage Detection, Hydrajet MS30-1000 High Pressure Coolant, Through Spindle Coolant, Floor Standing Filtermist FX4002 Unit, Swarf Conveyor. Country of Origin: Japan Location: This lot is located in Tamworth, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Gkodpfx Afjxnlf Sjioc

Condition: excellent (used), Year of construction: 2008, Spinner TC 600-65-SMCY, year of manufacture 2008 Gsdsxniy Tepfx Afiokc

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 375 mm, bar diameter (max.): 52 mm, controller manufacturer: DMG MORI, controller model: COMPACT LINE, number of slots in tool magazine: 12, CNC Lathe TECHNICAL DATA & EQUIPMENT: Frequency: 50 Hz Swing over bed: 620 mm diameter Swing over cross slide: 465 mm Number of spindle speed stages: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Shank height for square tools: 20 mm diameter Shank diameter for boring bars: 32 mm diameter Rapid traverse in X-axis: 30,000 mm/min Rapid traverse in Z-axis: 30,000 mm/min Gkjdpfx Afexm U Efeijc Including coolant system and chip conveyor PICK-UP NOTES: Collection must be arranged firmly between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: good (used), Year of construction: 1998, Mazak Integrex 35 turning/milling center, year of manufacture 1998, Mazak T Plus control, turning length 1500 mm, max. turning diameter 575 mm, Y axis, B axis infinitely swiveling, 40-position chain magazine, turning tool holder KM 63, milling tool holder SK 40, tailstock, steady rest, chip conveyor, Kitagawa three-jaw chuck B 12. Gsdoxm Trdjpfx Afiekc

Condition: excellent (used), Year of construction: 2001, Gildemeister MF Sprint 65 Machine in excellent condition Hainbuch SK65 Gedpfx Afoxm Td Tjiskc 2 x turret with live tools Low operating hours: 22,670

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle bore: 65 mm, travel distance X-axis: 180 mm, travel distance Y-axis: 45 mm, rapid traverse X-axis: 30 m/min, controller model: FANUC SERIES 31 i-MODEL A, Equipment: chip conveyor, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation for timely collection between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Travel distances: X1 / X2 axis: 180 mm Y1 axis: 45 mm Z1 axis: 704 mm Z2 axis: 620 mm E2 axis: 720 mm Rapid traverse X/Y/Z axis: 30 m/min Spindle 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW Spindle 2 Max. speed: 7,000 rpm Spindle nose: 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. jaw weight: 1.25 kg Drive power: 16.5 kW Turret Turret 1: 10-position tool turret Turret 2: 12-position tool turret Driven stations: 12 stations Max. speed of driven tools: 8,000 rpm MACHINE DETAILS Control model: FANUC SERIES 31 i-MODEL A Gksdpfx Afoxm S Ahoisc Electrical data: Operating voltage: 400 V Frequency: 50-60 Hz Rated current: 80 A Dimensions & weights: Dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Total weight: 9,000 kg Operating hours: 5,381 h EQUIPMENT Documentation/manual KNOLL chip conveyor Tool holders

Condition: good (used), Year of construction: 2015, turning length: 2,100 mm, turning diameter: 650 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 695 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 2,100 mm, bar passage: 112 mm, total height: 3,030 mm, bar diameter (max.): 112 mm, overall weight: 19,000 kg, controller manufacturer: OKUMA, controller model: OSP P300S, number of spindles: 2, space requirement length: 6,000 mm, space requirement width: 3,050 mm, CONTROLS .. CNC controls OKUMA OSP P300S BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 2 .. number of y-axes: 1 .. number of b-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 650 mm .. turning diameter (max): 650 mm .. bar diameter (max): 112 mm .. worpiece length max.: 2100 mm MAIN SPINDLE .. spindle revolutions (min): 30 /min .. spindle revolutions (max): 3000 /min .. spindle torque: 700 Nm .. spindle diameter: 112 mm .. spindle positioning: 0.001 ° .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 3800 /min .. spindle positioning: 0.001 ° .. c-axis: yes X/Z SLIDE .. Z-axis travel: 2100 mm .. X-axis travel: 695 mm .. Y-axis travel: 300 mm .. rotating range B-axis up to: 240 ° .. traverse velocity Z (max): 1000 mm/min .. traverse velocity X (max): 1000 mm/min .. traverse velocity Y (max): 1000 mm/min .. tool fixture: Milling Spindle .. - rotation speeds (max): 12000 /min .. - drive power: 22 kW TOOL MAGAZINE .. number of positions: 40 .. tool length max.: 400 mm .. tool weight max.: 10 kg Gkjdpfx Afjxm Rtljiec X/Z SLIDE .. Z-axis travel: 1584 mm .. X-axis travel: 235 mm .. - counter spindle: yes ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6000 mm .. space requirements -front/back-: 3050 mm .. total height: 3030 mm .. total weight approx.: 19000 kg -Big Bore left spindle: Spindle holder A11 (Din 55026) Chuck is a SMW KNCS-N 325-104 - Tool holder (top) Milling spindle (Capto C6)

Condition: used, Year of construction: 2016, turning diameter: 650 mm, spindle motor power: 22 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 695 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 1,600 mm, bar passage: 95 mm, total height: 3,030 mm, bar diameter (max.): 95 mm, overall weight: 18,000 kg, controller manufacturer: OKUMA, controller model: OSP P300S, number of spindles: 2, space requirement length: 4,480 mm, CONTROLS Gkodpoxm Rtfofx Afisc .. CNC controls OKUMA OSP P300S BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 2 .. number of b-axes: 1 SPINDLE / HEAD .. - positioning/indexing: 0.001 ° .. spindle revolutions (max): 12000 /min .. tool fixture: HSK A63 .. drive power: 22 kW WORKING RANGE TURNING .. turning diameter (max): 650 mm .. bar diameter (max): 95 mm MAIN SPINDLE .. spindle revolutions (max): 3000 /min .. drive power: 32 kW .. spindle torque: 955 Nm .. spindle diameter: 112 mm .. spindle bore diameter: 95 mm COUNTER SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 26 kW .. spindle torque: 420 Nm X/Z SLIDE .. Z-axis travel: 1600 mm .. X-axis travel: 695 mm .. Y-axis travel: 300 mm .. rotating range B-axis up to: 210 ° .. number of tool positions (total): 12 TOOL MAGAZINE .. number of positions: 80 .. tool diameter max.: 90 mm .. - with free neighbour positions: 130 mm .. tool length max.: 400 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4480 mm .. total height: 3030 mm .. total weight approx.: 18000 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. hydraulic system: yes .. European CE standards: yes

Condition: used, Year of construction: 2017, spindle speed (max.): 45,000 rpm, travel distance X-axis: 207 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,225 mm, controller manufacturer: MAZAK, controller model: SMOOTH G, number of spindles: 2, CONTROLS .. CNC controls MAZAK SMOOTH G BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 2 .. live positions: yes MAIN SPINDLE .. spindle revolutions (max): 45000 /min .. drive power: 22 kW .. spindle bore diameter: 65 mm .. spindle positioning: 0.0001 ° .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 5000 /min .. drive power: 22 kW .. spindle positioning: 0.0001 ° .. c-axis: yes X/Z SLIDE .. Z-axis travel: 1225 mm .. X-axis travel: 207 mm .. Y-axis travel: 100 mm .. distance spindle tool holder (max): 344 mm .. number of tool positions (total): 12 .. number of live positions: 12 .. - rotation speeds (max): 6000 /min X/Z SLIDE .. Z-axis travel: 1280 mm .. X-axis travel: 141 mm .. Y-axis travel: 70 mm .. rotating range B-axis up to: 0.0001 ° .. distance spindle tool holder (max): 210 mm .. number of tool positions (total): 12 .. number of live positions: 12 .. - rotation speeds (max): 6000 /min Gsdoxm Rr Uspfx Afiekc Accessories - 1 set of tool holders - 1 pc. 3-jaw chuck Kitagawa BB08 for main spindle - 1 pc. collet chuck Hainbuch 52mm, axfix - 1 piece bar loader, Hydrafeed Multifeed MX-1B

Condition: used, Year of construction: 2017, turning length: 1,519 mm, turning diameter: 658 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, total height: 2,720 mm, bar diameter (max.): 80 mm, overall weight: 16,900 kg, controller manufacturer: MAZATROL, controller model: SMOOTH X, number of spindles: 2, space requirement length: 4,910 mm, space requirement width: 2,800 mm, CONTROLS .. CNC controls MAZATROL SMOOTH X BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 WORKING RANGE TURNING .. turning diameter (max): 658 mm .. bar diameter (max): 80 mm .. worpiece length max.: 1519 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 30 kW .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 26 kW .. c-axis: yes X/Z SLIDE .. Z-axis travel: 1585 mm .. X-axis travel: 615 mm .. Y-axis travel: 250 mm .. rotating range B-axis up to: 210 ° .. rapid traverse Z: 50000 mm/min .. rapid traverse X: 50000 mm/min Gsdjxm Rr Iepfx Afiokc .. rapid traverse Y: 40000 mm/min X/Z SLIDE .. rotating range B-axis up to: 0.0001 ° .. - rotation speeds (max): 12000 /min .. - drive power: 24 kW TOOL MAGAZINE .. number of positions: 72 .. tool diameter max.: 90 mm .. - with free neighbour positions: 125 mm .. tool length max.: 400 mm .. tool weight max.: 12 kg DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4910 mm .. space requirements -front/back-: 2800 mm .. total height: 2720 mm .. total weight approx.: 16900 kg ATTACHMENTS (TURNING) .. hydraulic system: yes .. European CE standards: yes

Condition: used, Year of construction: 2012, turning length: 1,540 mm, turning diameter: 760 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 46 mm, total height: 3,052 mm, bar diameter (max.): 46 mm, overall weight: 1,550 kg, controller manufacturer: FANUC, controller model: 31I A, space requirement length: 5,125 mm, space requirement width: 2,625 mm, CONTROLS .. CNC controls FANUC 31I A WORKING RANGE TURNING .. turning diameter (max): 760 mm .. bar diameter (max): 46 mm .. worpiece length max.: 1540 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 22 kW .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 26 kW .. c-axis: yes X/Z SLIDE .. Z-axis travel: 1585 mm .. X-axis travel: 630 mm .. Y-axis travel: 230 mm .. number of tool positions (total): 12 .. number of live positions: 12 .. - rotation speeds (max): 4000 /min X/Z SLIDE .. rotating range B-axis up to: 0.001 ° .. traverse velocity Z (max): 1515 mm/min .. traverse velocity X (max): 220 mm/min .. - rotation speeds (max): 12000 /min .. - drive power: 22 kW Gjdpfx Ajxm Rrzjfiekc TOOL MAGAZINE .. number of positions: 40 .. tool diameter max.: 90 mm .. - with free neighbour positions: 130 mm .. tool length max.: 400 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5125 mm .. space requirements -front/back-: 2625 mm .. total height: 3052 mm .. total weight approx.: 1550 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. coolant unit: yes .. coolant through turret: yes .. through spindle coolant attachment: yes .. hydraulic system: yes .. European CE standards: yes Switch-on hours :41000h Running time:19000h Milling:3400H

Condition: used, Year of construction: 2018, turning diameter: 370 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 207 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 760 mm, bar passage: 80 mm, bar diameter (max.): 80 mm, controller manufacturer: MAZAK, controller model: SMOOTH G, number of spindles: 2, CONTROLS .. CNC controls MAZAK SMOOTH G BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 2 .. live positions: yes WORKING RANGE TURNING .. swing diameter (max): 370 mm .. turning diameter (max): 344 mm .. bar diameter (max): 80 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power: 26 kW .. spindle positioning: 0.0001 ° .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 5000 /min .. drive power: 22 kW .. spindle positioning: 0.0001 ° .. c-axis: yes X/Z SLIDE .. Z-axis travel: 760 mm .. X-axis travel: 207 mm .. Y-axis travel: 100 mm .. number of tool positions (total): 12 .. number of live positions: 12 .. - rotation speeds (max): 6000 /min .. - drive power: 11 kW X/Z SLIDE .. Z-axis travel: 815 mm .. X-axis travel: 141 mm .. Y-axis travel: 70 mm .. number of tool positions (total): 12 .. number of live positions: 12 Gedpfx Ajxm Rruofiskc .. - rotation speeds (max): 6000 /min ATTACHMENTS (TURNING) .. bar magazine: yes .. - bar diameter (max): 80 mm .. workpiece unloading system: yes .. chip conveyor: yes .. coolant unit: yes .. coolant through turret: yes .. through spindle coolant attachment: yes .. aspiration unit: yes .. hydraulic system: yes .. European CE standards: yes Accessories - 1 set of tool holders - 1 pc. collet chuck Hainbuch 80 mm Axfix for main spindle - 1 pc. 3-jaw chuck Kitagawa BB210 for main spindle 1 pc. 1 pc. collet chuck Hainbuch 80 mm Axfix for counter spindle - Collet chuck Hainbuch 80 mm Axfix for counter spindle

Condition: used, Year of construction: 2012, turning length: 500 mm, turning diameter: 530 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 550 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, controller manufacturer: MAZATROL, controller model: MATRIX, number of spindles: 1, CONTROLS .. CNC controls MAZATROL MATRIX BASIC FUNCTIONS .. number of spindles: 1 WORKING RANGE TURNING .. turning diameter (max): 530 mm .. bar diameter (max): 65 mm .. worpiece length max.: 500 mm MAIN SPINDLE .. spindle revolutions (max): 5000 /min .. c-axis: yes X/Z SLIDE .. Z-axis travel: 550 mm .. X-axis travel: 450 mm .. Y-axis travel: 2000 mm .. rotating range B-axis up to: 190 ° .. - rotation speeds (max): 12000 /min TOOL MAGAZINE .. number of positions: 72 .. tool diameter max.: 90 mm .. - with free neighbour positions: 125 mm .. tool length max.: 210 mm ATTACHMENTS (TURNING) .. tailstock: yes .. bar magazine: yes .. - bar length (max): 1200 mm .. - bar diameter (max): 65 mm .. workpiece unloading system: yes .. thread cutting attachment: yes Gjdpfx Afoxm Rrnoijkc .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. coolant through turret: yes .. through spindle coolant attachment: yes .. aspiration unit: yes .. hydraulic system: yes .. European CE standards: yes

Condition: excellent (used), Year of construction: 2004, The machine can be inspected under power. Gkodjxmttnepfx Afijc

Condition: excellent (used), Year of construction: 2012, Offered here is a Doosan Puma TT1800SY-GL CNC lathe including portal loader. The machine is in good condition and can be inspected under power in our warehouse. The scope of delivery includes various static tool holders and 4 driven tool holders. The machine will be loaded free onto truck by overhead crane. Make: Doosan Model: Puma TT 1800SY-GL Control: Fanuc 31i Year of manufacture: 2012 Technical Data: Turning diameter (lower and upper turret): 230 mm Turning diameter over bed: 230 mm Turning diameter over slide: 230 mm Recommended turning diameter: 210 mm Chuck size (both spindles): 210 mm/ 8 inch Spindle bore: 65 mm Travel: X1-Z1 (upper turret): 165x700 mm X2-Z2 (lower turret): 190x720 mm Y (upper turret): 100 mm A (sub spindle): 770 mm C-axis: 360° (0.001° increment) Feed rates: X1-X2-Z1-Z2: max. 20 m/min Y: 7.5 m/min A: max. 40 m/min Spindle speeds (both spindles): 6000 rpm Spindle power S1: 22/19.6 kW Spindle power S2: 22/18.5 kW Torque (both spindles): 208 Nm Godpfx Asxmkfhefiokc Number of tool stations: 24+24 (lower and upper turret) Rotational speed of driven tools: max. 6,000 rpm Torque driven tools: 5.5/2.2 kW (7.4/3.0 kW) Power consumption: 64.86 kVA Dimensions: 3905x2250x2600 mm (machine only) + portal loader

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm Gkjdpfx Aoxmirgjfisc - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm Gjdpfxsxmilyj Afiekc spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: excellent (used), Year of construction: 2015, Data Fanuc 32i B Chuck: 250 mm / 170 mm Bar passage: 65 mm Gsdpfxjxmid Ne Afiskc Y-axis: 120 mm Turret: 20 positions Tool measurement Parts catcher Chip conveyor

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter Gsdpfx Afoxmhdnsiekc - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Gsdpfsxmd Txex Afiskc Number of spindles: 6 Pcs Guide rod length: 3,3 m

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2200 mm Measurements depth 3000 mm Measurements height 3300 mm Machine weight 13000 kg Gsdpfx Afoxmbx Sjiokc Main Drive Spindle bore 100 mm Number of axis 2 Movement X-Axis Movement 350 mm Z-Axis Movement 790 mm Tools Max tool diameter 50 mm This HWACHEON VT550R was manufactured in 2008. It features a hydraulic chuck diameter of 500 mm, a maximum turning diameter of 650 mm, and a spindle speed up to 1,500 RPM. The machine includes a 12-position turret and a chip conveyor, ensuring efficient operation. Consider the opportunity to buy this HWACHEON VT550R turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2002, turning diameter max. 300 mm turning length max. ca. 550 mm control PC Fusion CNC 640 T standard turning dia. 276 mm swing diameter max. 525 mm Distance Spindlenose - turret face 115 - 690 mm turning speed range - main spindle 35 - 4.000 min/-1 power capacity - main spindel 22 kW max. Torque 351 Nm spindle nose A2-6" spindle bore 76 mm max. usable bar diameter 64 mm chucking diameter max. 250 mm C-Axis 360 ° number of toolpositions 12 pos. tool taper VDI 40 Shank diameter 25 mm Drill shank diameter 40 mm turret change time 0,2 / 0,6 sec. Spindle speed - driven tool pos. 25 - 4.500 min -1 power capacity - driven tool pos. 3,7 kW max. Torque 35 Nm Spindle speed range subspindle 35 - 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 57 Nm chucking diameter max. 150 mm x-axis 190 (185 + 5) mm z-axis 575 (580 + 5) mm Traverses Subspindle B: 585 (580 + 5) mm C-Axis 360 ° rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 rapid traverse B: 18 m/min feed range X/Z: 0 - 5.000 mm/min feed range C: 1 - 2.000 °/min total power requirement 34 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle - Tool-Drive Godjxmaguspfx Afiekc - C-Axis