Silicon Plus

Year of construction: 2019, Condition: good (used), Eliog KU 200 - 15 - 10 - 10 Drying oven - Forced Air Batch Furnace Temperature range: 70 - 200 C Bkndg7Qppy Air flow: horizontal. Heating performance: 36 kW. Connected load: 38 kVA. Rated voltage: 3 x 400 V / 50 Hz / PE. Type of protection: IP 54 / IP 20 (heating). Acoustic emission: 70dBA. Door leaf 2 . Mean velocity in the processing chamber: 0,5 ... 0,75 m/s. Weight: 750 kg. Processing chamber features - 1 pair of recessed floor rails, rail gauge 600 mm - 1 pipe duct DN 25 on the left side - shutter wall on the left side - rope pull switch for door release. Processing chamber dimensions: H1500 x W1000 x D1000 mm. External dimensions: H2408 x W1889 x D 1443 mm. Switch cabinet mounting with telescopic rails. On stock 3 pcs ready for delivery.

Condition: new, Year of construction: 2025, Functionality: fully functional, coil width: 200 mm, overall weight: 80 kg, material width: 200 mm, roll width: 64 mm, sheet width: 200 mm, material thickness: 3 mm, brake voltage: 220 V, warranty duration: 12 months, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. Vmeh0Cof0 – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,200 h, Functionality: fully functional, overall weight: 600 kg, input voltage: 400 V, Model: BAS 120. Automatic Flash Butt Welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Automatic annealing temperature by Siemens control. Hydraulic weld de-burring tool. Year of manufacture: 2003. Nominal primary voltage: 400 [V AC]. Max. welding rating: 45 [kVA]. Welding ranges: Band saw blades for wood: 25-120 [mm]. Bi-metal bandsaw: 25-105 [mm]. Hoop knives: 25-60 [mm]. Weight: 600 [kg]. Dimensions: 1000*1350*1700 [mm]. Mdt7Ybmwc Instructions and packing included.

Condition: reconditioned (used), Functionality: fully functional, ram adjustment: 40 mm, installation height: 2,500 mm, pressing force: 30 t, ram stroke: 40 mm, High Speed Automatic Punching Press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with twin synchronized double rolls feeds for strips widths from 5 mm – 150 mm. PLC touch screen logical interface control. Numerically controlled stamping process (NC). With stroke and speed counter, programmable length, auto stop. Three working modes: Manual, One stroke and Automatic. Pneumatic clutch and brake. Operator’s instruction manual in English. Stroke power: 300 [KN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Im0Ivoh0O Table: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute up to 10 in one second. Maximum strip thickness 2.5 [mm]. Central lubrication. Power consumption 5.5 [kW] Technical Air 5-10 [bar]. Warranty: 1 year. Two feeders are used when you need to stamp very thin, soft strip or very heavy strip, to secure precise feeding. All specifications non-binding , subject to change without notice.

Condition: used, Year of construction: 1988, Functionality: fully functional, Ideal BAS 120. Flash Butt welding Machine for Band Saw Blades. Year of manufacture: 1988. Hydraulic clamping. Annealing pyrometer. Blade positioning device. Cj22Jenb Blade width up to 120 mm. Painted used machine in working condition. Delivery from stock. Voltage: 440 V (USA grid). Transformer for 400V attached (EU grid).

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. B30Tu0Bv High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: good (used), Functionality: fully functional, BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Cqqmbl0Gpu Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 mm max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm.

Condition: used, Year of construction: 2012, Functionality: fully functional, Decoiler with interlayer rewinder EW. Brand: Soprem. Model: H100/J2/10M/U - EW/J1/N0/XX. Serial no.: 20120014/2. Year of manufacture: 2012. Decoiler information: Loading capacity maximum: 100 kg. Outside diameter of bobbin maximum: 800 mm. Inside diameter of bobbin: 360 mm. Core diameter of hole: 50 mm. Bobbin width: 120 mm. Speed decoiler: 1 - 15 rpm. Speed production line: 1 - 15 m/min. Interlayer rewinder information: Loading capacity maximum: 15 kg. Outside diameter of bobbin: 300 mm. Cdppy3Yytm Bobbin width maximum: 80 mm. Rotation speed: 2 - 140 rpm. Adjustable torque: 12 - 180 n/cm. Electricity: 230 V / 60 Hz / 8.1 A / 0.25 kW. Dimensions: 980 x 650 x H1720 mm. Loopcontrol on separate stand. Loopcontrol dimensions: 450 x 450 x H1330 mm. Made in Switzerland. Complete documentation in German and English. No clear sign of use, machine came from production that never started. More stamping equipment made by Bruderer, Bihler, Schaal, Mabu available in our stock for immediate delivery.

Condition: used, Year of construction: 2012, Functionality: fully functional, coil weight: 30 kg, coil outer diameter: 800 mm, coil width: 45 mm, Double – decoiler with interlayer rewinder EW. Brand: Soprem. Model: 2H30/J2/10M/L3.N1 – 2EW/J1/N0/XX. Serial no.: 20120014/5. Year of manufacture: 2012. Decoiler information: Loading capacity maximum: 30 kg (x 2). Outside diameter of bobbin maximum: 800 mm. Inside diameter of bobbin: 360 mm. Core diameter of hole: 50 mm. Bobbin width: 45 mm. Speed decoiler: 0.3 – 4 rpm. Speed production line: 0.3 – 5 m/min. Interlayer rewinder information: Loading capacity maximum: 15 kg. Dpkv2H Outside diameter of bobbin: 300 mm. Bobbin width maximum: 80 mm. Rotation speed: 2 – 140 rpm. Adjustable torque: 12 – 180 n/cm. Electricity: 230 V / 60 Hz / 9.4 A / 0.18 kW. Dimensions: 1840 x 650 x H2100 mm. Made in Switzerland. Complete documentation in German and English. No clear sign of use, machine came from bankrupted production that never started. More stamping equipment made by Bruderer, Bihler, Schaal, Mabu available in our stock for immediate delivery.

Condition: used, Type: SMH 060 Band saw blade grinding machine. Strip width up to: 60 [mm]. Power: 400 [V] / 50 [Hz]. For removing the weld bur from butt welded joints. In used condition, cleaned, repainted and tested.  3 pcs on stock. Bwpj2V7G8U

Condition: good (used), Year of construction: 1990, operating hours: 39,687 h, Functionality: fully functional, Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 - 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm H8Lj3Eayd Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Condition: used, Year of construction: 1982, operating hours: 24,864 h, Functionality: unexamined, total height: 1,800 mm, ram adjustment: 50 mm, total width: 1,250 mm, table length: 250 mm, table width: 460 mm, Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. Packing and loading included. Feeding device not included, if needed contact for more information. Gc3Twkvnv

Condition: good (used), Year of construction: 1998, Functionality: fully functional, ram adjustment: 40 mm, installation height: 2,400 mm, total width: 17,000 mm, table length: 400 mm, table width: 400 mm, pressing force: 25 t, stroke adjustment: 17 mm, sheet width: 200 mm, overall weight: 2,500 kg, year of last overhaul: 2023, power: 0.003 kW (0.00 HP), Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]). Speed range: 80-400 [spm]. Completely rebuilded Dec. 2023 Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. E2M7Vgm Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available on our stock for sale.

Condition: good (used), Year of construction: 1993, operating hours: 59,000 h, Functionality: fully functional, machine/vehicle number: Revised 2024, table length: 760 mm, table width: 650 mm, BRUDERER BSTA 50 High Speed Automatic Punching Press Max. Pressure: 500 kN 50 T Speed range: 100 – 1070 SPM Year of production: 1993. Revised 2024 Hour-meter: 59295 h Machine tested with non-stop run 1.000.000 strokes Fitted with roller-gripper feed unit BBV 190/85 on left-hand side. Max. strip width: 160 mm Max. strip thickness: 4 mm Max. feeding pitch: 85 mm Feeding cycle: 180 Degrees. Strip running height from clamping plate: 60 – 140 mm Ram height adjustment: 64 mm Bolster (Clamping) plate dimensions: 760 x 650 mm Hole in table: 310 x 90 mm Bed opening: 730 x 250 mm Max. Tool width clearance between columns: 770 mm Max. Strip clearance width: 256 mm Bjd2Fbik0Cf Connected load: 25 kW Power: 380 V 50 Hz Control voltage: 24 V Machine dimensions: H 3040 x W 2400 x D 1278 mm Weight of machine: cca. 7800 kg Electrical cabinet and control. Fault monitoring system. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass. Also on stock high speed presses: Mabu, Schaal and other Bruderer models.

Condition: good (used), Year of construction: 1996, operating hours: 51,573 h, ram adjustment: 51 mm, table length: 510 mm, table width: 400 mm, input voltage: 400 V, Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Mbawvyqg Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. CABIN ON PHOTOS IS NOT INCLUDED (optional cost of cabin only 8.000 EUR) Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Condition: good (used), Year of construction: 1997, Functionality: fully functional, overall weight: 500 kg, total width: 1,000 mm, working width: 100 mm, saw blade diameter: 100 mm, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Hydraulic weld de-burring tool. Blade positioning device. Year of manufacture: 1997. Automatic annealing temperature control. Mojdswso7T Welding strip up to 100 [mm]. Bimetal strip up to 80 [mm]. Connection: 400 [V]. Weight: 500 [kg]. Dimensions (W*D*H): 1400*900*1500 [mm]. Operating instructions and packing included.

Condition: used, Year of construction: 1994, Model: BAS 100. Fzfmlcs Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Hydraulic weld de-burring tool. Blade positioning device. Year of manufacture: 1994. Automatic annealing temperature control. Welding strip up to 100 [mm]. Bimetal strip up to 80 [mm]. Connection: 400 [V]. Weight: 500 [kg]. Dimensions (W*D*H): 1400*900*1500 [mm]. Instructions and packing included.

Condition: good (used), Year of construction: 2010, BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Isseqza Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Condition: used, Year of construction: 2000, Machine for setting and induction flex hardening of HSS hand hack saw blades Bcja3Rug0P7 Brand: ALO Center (ALO Teknik) Model: 690-81 Serial no.: 200026 Pay off magazine. Setting machine type ALO 681. Hardening generator. Collect magazine. Machine in used untested condition. Sold as is on pictures. Schematics of generator included. Packing included.

Condition: excellent (used), Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1993. Completely revised in 2023 with new Siemens PLC control. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 300. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Cyoj3Zwhoe Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 - 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 5,5 [kW]. Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Including operating instructions in German and English and schematics included. Also on stock high speed presses: Mabu, Schaal, Bihler and other Bruderer models. Also Ideal BAS welders.

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Magic Wave 2200 Job G/F Arc welding machine. Cvolfxlg Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Strip length: 15 – 80 mm. Strip width: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Year of construction: 2012, Condition: used, Rofin DQ x80 Laser source Laser disconnected from bankrupt solar panel production in California in 2015. Unused from then on. On stock available 2 x DQ x80 and 2 chillers. Year of manufacture: 2012 and 2010 Voltage: 480 [V] Frequency: 50/60 [Hz] Current: 31,2 [A] Weight: 875 [kg] Ctjknmgb2E Indicated price includes: 1x Rofin DQ x80 1x Chiller Galvo head Optics

Condition: ready for operation (used), Year of construction: 1976, Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Cq0Vxe3Zoq Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 23000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass. Machine dismantled ready for delivery. Came from running production.

Condition: excellent (used), Sound insulating cabins. For Bruderer high speed automatic presses. On stock available cabins for machines: BSTA 25 BSTA 41 BSTA 50 BSTA 60 BSTA 80 Cabins sold refurbished, carefully disassembled and packed for transport. Painted in white and anthracite (or colors requested by customer). Cabin is equipped with all needed holes for easy use of a Bruderer press. Front and rear doors with inspection glass. Air ventilator for climate control on top cover. Qot8Xlwb For more information don't hesitate to contact us. We have on stock Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, also Mabu and Schaal automatic punching machines.

Condition: used, Year of construction: 1992, Schaal SEP 40 control unit. Only control cabinet without machine. Qwler In tested working condition as seen on video. Disconnected from machine and in storage. Including original technical documentation. We have on stock more Bruderer, Mabu and Schaal high speed presses.