Meta Cnc Technology San. Tic. Ltd. Sti.

Condition: used, Year of construction: 2010, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 810 D 3D ShopMill Siemens turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm Chedpfx Aoz I Dy Eofgoc tool taper SK 40 DIN 69871 table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change time 1,6 sec change-time chip to chip 7,0 sec rapid traverse 25 m/min total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V Ecoline - only 2,300 spindle hours - only 13,700 power-on hours

Condition: used, Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, The used KONDIA HM-1060 high-speed vertical machining center is a medium-sized, numerically controlled machine with a cast iron gantry structure, weighing approximately 7,300 kg. It has travels of X 1,000, Y 600, Z 510 mm, a table size of 1120 × 600 mm, and a load capacity of 660 kg, with rapid traverse rates up to 24 m/min. It features a cast iron structure with support on 3 points for improved thermal compensation, a SELCA 4045 CNC control with a color LCD, a network interface, a hard disk, and a BT-40 spindle at 10,000 rpm, cooled by a dedicated chiller. It also includes an 18-position pick-up tool changer, a remote handwheel, and a conveyor chip evacuator. Codpfjz I Dvaex Afgjhc Year of manufacture: 2006, complete with manuals and certification.

Condition: used, Year of construction: 2011, operating hours: 13,600 h, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. Chodpjz I Du Aofx Afgjc It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Complete with manuals and CE certificate.

Condition: used, Year of construction: 2006, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 15425021604, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,700 mm, total length: 2,800 mm, total width: 2,800 mm, table length: 1,200 mm, rotational speed (min.): 12,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,075 h, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: DC, Equipment: documentation/manual, DMG Deckel Maho DMC 1035 V vertical machining center, year of manufacture 2006 The machine has only processed plastics – in good condition! Year of manufacture: 2006 Machine number: 15425021604 Condition: Good Delivery terms: Free loading onto truck Location: 72178 Waldachtal !!!!!The machine must be collected on 21.10.2026! We can offer transport if required!!!!! Payment terms: Payment in advance – by bank transfer Internal number: 180-1 Can be inspected while powered on: Yes Technical data: - Operating hours (machine on): approx. 39,447 h (will increase slightly) - Spindle hours: 16,075 h (will increase slightly) - Tool holder: SK40 - Max. spindle speed: 12,000 rpm - Tool magazine: 30 positions - Table dimensions: 1200 x 560 mm - Control system: Heidenhain iTNC 530 - Travels X / Y / Z: 1035 / 560 / 510 mm - 400 V / 50 Hz / 35 kVA Scope of delivery: - Manuals and documentation - Wireless measuring probe Heidenhain TS640 - Handwheel - Programmable 4th axis Lehmann - Angle plate - Manual dividing head - Swivel vice Note: The vices on the machine table and the tool holders in the magazine are not included in the scope of delivery! Dimensions & weights: - Installation dimensions L x W x H approx.: 2800 x 2800 x 2700 mm - Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Chodpfx Afoz I Dl Isgsc Additional information: ►If required, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with exclusion of all warranties. ►Technical data without guarantee. ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, 4-axis machine X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Control system: Heidenhain TNC 426 Cjdpfxoz Izc Do Afgehc Spindle nose: 100-700 mm Work table: 1,080 x 580 mm Maximum workpiece weight: 550 kg T-slots: 7 T-slot width: 14 mm Tool magazine with: 36 positions Maximum tool weight: 8 kg Maximum tool length: 340 mm Machine weight (approx.): 6.2 t Space requirement (approx.): 4,790 x 5,330 x 2,905 mm

Condition: good (used), Year of construction: 1997, Machine type: - Kondia HM 1060 - Year of manufacture: 1997 Control system: - Heidenhain iTNC 410 - Electronic handwheel Tool changer: - 18 magazine slots Travel distances: - X 1000, Y -600, Z -600 mm Main spindle: - Max. 6000 rpm Table: - Clamping area: 1120 x 600 mm Coolant: - IKZ 20 bar Accessories: - Chip conveyor Availability: Chodpfx Afez Iyqtsgsc - Immediately available

Condition: good (used), Year of construction: 1998, Deckel Maho DMC 103V Year of manufacture: 1998 Control system: Codpfxoz Iyqao Afgshc - Siemens 810D Main spindle: - max. 8,000 rpm Travel distances: - X-1000, Y-600, Z-600 mm Work table: - Clamping area 1200 x 600 mm - max. table load 800 kg Tool changer: - 24 magazine slots Availability: - Immediate

Condition: excellent (used), Year of construction: 2010, CNC machining center DMG 1035 V ecoline 2010 Siemens 810 D / Shopmill Travel ranges: X-axis: 1035 mm Y-axis: 560 mm Z-axis: 510 mm Spindle: Tool holder: SK 40 Speed range: max. 10,000 rpm Tool magazine: 20 magazine positions Table design: Fixed table Chedjz Iyp Aepfx Afgoc 1200 x 560 mm - Chip conveyor - Internal cooling lubricant system (IKZ) 20 bar

Condition: ready for operation (used), Year of construction: 2000, Available immediately ex-works: CNC vertical machining center, Quaser Type MK 60 II Year of manufacture: 2000 CNC control: Fanuc 18 M Table: 1050 x 550 mm Travel ranges X/Y/Z: 1020/610/560 mm Spindle taper: SK 40 Tool magazine: 36 positions Spindle speeds up to 10,000 rpm Power at the spindle: 15 kW Internal cooling system Chodpfez Ixqxsx Afgoc Weight: 8.5 tons Price: EUR 8,500.00 plus VAT, ex-works.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Machine parameters: Travel in X, Y, and Z axes: 1270 x 670 x 625 mm Table clamping area: 1300 x 670 mm Description: Codpfx Afez Iw Ddsgohc The machine is in good technical condition, and testing is possible by prior arrangement. It features a FANUC control system. The machine has a cast iron construction, linear guides, travel in the X/Y/Z axes of 1270/670/625 mm, table dimensions with clamping "T" slots of 1300 x 670 mm, table load capacity of 1000 kg, and a tool changer with 30 positions. Extensive accessories include: a 4th axis (rotary table), a hydraulic vice, a RENISHAW tool and workpiece probe, an oil skimmer, a three-color light signaling system, a chip conveyor, a Filtermist 6002 emulsion mist extractor, tool holders, etc.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,917 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis Mazak VCN-530C was manufactured in 2017. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine includes a robust worktable size of 1,300 x 550 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-530C vertical machining centre we have for sale. Contact us for further details. • Operating counter (cutting only): 11,917 h • Axis travels (standard VCN 530C): • Distance table surface to spindle nose: 150–660 mm • Distance column to spindle centre: 586 mm • Work envelope / capacities: • Max workpiece length: 1,300 mm • Max workpiece width: 550 mm • Max workpiece height: 570 mm • Max workpiece weight: 1,200 kg • Worktable: • Table size: 1,300 × 550 mm • T-slots: 5; width 18 mm; pitch 100 mm • Note: Table-load rating does not represent rotary table load capacity • Spindle: • Motor power: 18.5 / 11 / 7.5 kW (duty dependent) • Tooling / ATC: • Max tool length: 350 mm • Max tool diameter: 80 mm (125 mm with adjacent pockets empty) • Tool-to-tool change: 1.3 s • Feed rates: • Rapid X/Y/Z: 42 m/min • Cutting feed: 1–42,000 mm/min • Utilities / dimensions: • Coolant tank capacity: 250 L • Floor space (approx.): 2,880 × 3,102 mm • Machine height (approx.): 2,807 mm • Included machine features (PD081 production package): • Workpiece air blast • High-pressure through-spindle coolant • Coolant flushing of machine covers • Synchronous tapping • CNC memory: 8 MB maximum program size • G00 Slope Constant rapid-movement optimisation Additional equipment • Fourth axis: • Tsudakoma NC rotary table, model RNE-200L (Japan), with 250 mm faceplate • Fourth-axis preparation on machine • Chip management: • Left-side Crowther hinged-belt chip conveyor • Preparation for a left-side chip conveyor • Probing: • Renishaw OMP60 workpiece probe • Preparation for OMP60 on machine • Extraction: • Filtermist FX6002 oil mist extraction unit • Other: • Workholding system Cjdpoz Itghjfx Afgjhc • Pneumatically powered coolant wash gun Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,807 mm, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis Mazak VCN-530C was manufactured in 2020. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,300 x 550 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-530C vertical machining centre we have for sale. Contact us for further details. Working area and travels • Table-to-spindle nose: 150–660 mm • Column surface to spindle centre: 586 mmTable • Dimensions: 1,300 × 550 mm • T-slots: 5 × 18 mm; pitch 100 mmSpindle • Drive: Electrically selected two-range • Spindle bearing bore: 70 mm • Acceleration time: 2.0 s • Motor power: 18.5 kW (5 min) / 11 kW (40% ED) / 7.5 kW (S1)Feed rates • Rapid traverse X/Y/Z: 42 m/min • Cutting feed X/Y/Z: 1–42,000 mm/minAutomatic tool changer Chjdpfez Iqy Eex Afgjc • Max tool diameter: 80 mm (adjacent tools) / 125 mm (adjacent pockets empty) • Max tool length: 350 mm (from gauge line) • Tool selection: MAZATROL random memory, shortest-path • Tool-to-tool time: 1.3 sCoolant and chip management • Through-spindle high-pressure coolant: approx. 15 kgf/cm² (~14.7 bar) • Coolant tank: 250 L • Coolant flushing for covers • Manual washdown gun • Workpiece air blast • Preparation for mist extractionControl functions and probing preparation • Synchronous tapping • Maximum program size: 8 MB • G00 Slope Constant (rapid movement optimisation) • Preparation for Renishaw OMP60 workpiece probeMachine dimensions • Floor space: 2,880 × 3,102 mm Additional equipment • Kitagawa NC rotary table, MR250 series (Type: MR250RAE13) • Date of manufacture: Oct 2020 • Weight: 85 kg • Mechanical mounting for MR250 included • CROWTHER left-side hinged-belt chip conveyor • Additional working-area lighting • Three-colour LED signal tower • Polish manuals and safety labels Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2015, MTRent MTCut V110TH - CNC Milling Machine - Spindle mount: SK40 - X/Y/Z: 1100 / 610 / 610 mm - Heidenhain CNC control - Includes milling tools, technical documentation, and operating manual - Operating hours: 21295 h - Spindle hours: 6661 h - Year of manufacture: 2015 Technical Data Axes: - X-axis travel: 1100 mm - Y-axis travel: 610 mm - Z-axis travel: 610 mm - Rapid traverse rate X/Y/Z: 32 m/min - Feed rate: 1 - 12000 mm/min - Positioning accuracy: ± 0.005 mm - Repeatability: ± 0.003 mm Cedpfxjz Iquie Afgshc - Spindle nose to table: 120 - 730 mm - Linear guides X/Y/Z: Linear 45 / 45 / 45 mm - Machine bed: Cast iron Machine table: - Dimensions: 1250 x 610 mm - Max. table load: 900 kg - T-slots in table: 5 - T-slot width: 18 mm H8 - T-slot spacing: 100 mm Spindle: - Speed: 10000 rpm - Torque (40% duty cycle): 256 Nm - Power (40% duty cycle): 24 kW - Spindle cooling: Oil - Tool holder: SK40 - Pull stud: DIN 69871/72 Tool changer: - Tool stations: 30 - Tool change time (tool to tool): 1.5 s - Max. tool weight: 7 kg - Max. tool Ø: 80 mm - Max. tool Ø with free magazine space: 140 mm - Max. tool length: 300 mm Machine data: - Central lubrication: R68 (IS068) - Hydraulic oil: R32 (ISO32) - Compressed air: 3/8" 6-8 bar - Coolant tank: 250 l - Power supply: 400 V / 75 A / 35 KVA - Machine dimensions with chip conveyor (W x H x D): 3521 x 2890 x 3345 mm - Machine weight: approx. 7500 kg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Spindle nose – table: 120–730 mm Table size: 1,250 × 610 mm Chodpfez Im Tnjx Afgec T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW (40 %) Rapid traverse rate X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with free magazine slot: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control system: Heidenhain 530 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air: 3/8″, 6–8 bar Power supply: 400 V / 75 A / 35 kVA Coolant tank: 250 l Guideways X/Y/Z: 45/45/45 mm Machine weight: 7,500 kg Internal cooling (IKZ): 22 bar Program runtime: 12,214 h Spindle hours: 14,123 h Machine operating hours: 39,242 h Control system operating hours: 34,987 h EQUIPMENT Chip conveyor Electronic handwheel Internal cooling (IKZ) 22 bar Oil-cooled spindle Linear guideways X/Y/Z Machine bed made of cast iron Note: Machine is sold without tools and vise.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, SIEMENS 828D control system with USB interface and LCD screen Table dimensions: 1200 x 600 mm Codsz Ih E Eopfx Afgjhc T-slot size: 16 mm Number of T-slots: 5 T-slot distance: 100 mm Max. load capacity: 800 kg X-axis automatic travel: 1050 mm Y-axis automatic travel: 600 mm Z-axis automatic travel: 600 mm Spindle taper: SK40 DIN69871 Speed range: 10,000 rpm Tool magazine: 30-station Drive power: 11 kW Power requirement: 400V / 40 kVA / 3 x 32A Weight: approx. 7000 kg Dimensions (LxWxH): 4319 x 2300 x 3000 mm Features and accessories - SHOPMILL module in the control system - Chip conveyor - Coolant system - Portable handwheel - LED lighting - Spindle cooler - Manuals The machine is being sold due to company liquidation. Very good condition. Under power in our showroom.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 6,700 kg, MAZAK FJV-250 CNC Vertical Machining Center Cedpsz Ihxlsfx Afgshc For sale is a robust and powerful Mazak FJV-250 with a double-column/gantry design. Technical specifications: Manufacturer: MAZAK Model: FJV-250 Year of manufacture: 2001 Control: Mazatrol PC Fusion 640 M Travel ranges: X-axis: 1,020 mm Y-axis: 510 mm Z-axis: 460 mm Table size: approx. 1,200 × 550 mm Max. spindle speed: 12,000 rpm Tool holder: SK40 / ISO40 3-axis CNC machining center The FJV-250 is designed for precise and demanding milling operations thanks to its stable double-column construction. The generous work area allows for the machining of larger and heavier workpieces. The Mazatrol PC Fusion 640 M control system enables both comfortable Mazatrol dialog programming and the processing of CNC programs. The machine can be inspected and demonstrated under power by arrangement. Location: 78120 Furtwangen, Germany Subject to prior sale and errors in the technical specifications.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller model: SIEMENS 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 640 mm Number of pallets: 2 Table size: 2 × 1,000 × 450 mm Table load capacity: 600 kg Codjz Ibb Topfx Afgshc Spindle speed range: 50–10,000 rpm Drive power: 18.5 kW Tool interface: DIN 69871 / ISO 40 Feed rate range X/Y/Z: up to 10,000 mm/min Rapid traverse rate in all axes: 30 m/min MACHINE DETAILS CNC path control: SIEMENS 840 D Number of tool positions: 30 Machine dimensions & weight Machine dimensions L × W × H: approx. 3,605 × 3,041 × 3,220 mm Machine weight: approx. 6,700 kg EQUIPMENT 2-position pallet changer 30-position tool changer Internal coolant supply (ICS) Full enclosure with electrically interlocked safety doors Linear guides with double roller recirculating bearing for even absorption of high torques in all directions Ball screws in all 3 axes Machine bed made of Meehanite cast iron for high precision, rigidity, and vibration damping Swivel chip conveyor with integrated coolant system Preparation for 4th axis CE compliant

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426P, table width: 490 mm, table length: 1,150 mm, table load: 900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, spindle nose: BT 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal X: 1020 mm Transverse Y: 510 mm Vertical Z: 500 mm Rapid traverse rate for X, Y axes: 40 m/min Rapid traverse rate for Z axis: 25 m/min SPINDLE: Spindle power: 19 kW Maximum rotation speed: 10,000 rpm Chodpfx Afez Iadysgoc Spindle taper: BT 40 TABLE: Surface area: 1150 x 490 mm T-slots: 5 slots at 100 mm intervals Maximum load capacity: 900 kg TOOL CHANGER: Magazine positions: 30 Tool change time: 3.5 sec Maximum tool weight: 6 kg Maximum length: 250 mm Maximum diameter: 80 mm Machine complete with: • Chip conveyor • Operating manuals and CE declaration Year of manufacture: 1997

Condition: excellent (used), Year of construction: 2018, operating hours: 4,883 h, CN DMG MORI SLIM line Multi Touch Control 19” (operates on Siemens) Spindle hours: 4883 hours 2770 x 2750 x H2935 mm, footprint 4850 x 6100 mm Weight: 5830 kg Spindle speed: 12000 rpm X-axis: 1100 mm, Y-axis: –560 mm, Z-axis: –510 mm Table: 1400 x 560 mm Rapid traverse: 30 m/min Spindle power: 13/9 kW 30-position tool changer with dual arm Chip conveyor Washing gun Through-spindle coolant Chip conveyor Electronic handwheel Renishaw tool probe and workpiece probe Chodpfxsz H I Nns Afgjc

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, total height: 2,800 mm, table load: 1,500 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 7,000 g, This 3-axis Hurco VMX42T vertical machining center was manufactured in 2007. It features a robust table size of 1,270 × 610 mm, supporting a maximum load of 1,500 kg. Equipped with a high-speed spindle capable of up to 12,000 rpm and a BT40 taper, it ensures efficient machining. The machine includes a 24-tool automatic changer and rapid traverse rates of 24 m/min. Contact us for more information about this machine. • Table: • Size: 1,270 × 610 mm • Spindle: • Lubrication: Grease-lubricated • Through-spindle coolant (CTS): optional • Feed rates: • Cutting feed: up to 20 m/min • Tool changer: • Type: Automatic carousel • Accuracy: • Positioning: ±0.005 mm • Repeatability: ±0.003 mm • Control: • Hurco WinMax CNC Csdpfez Hxpljx Afgjhc • Display: Dual 19" touchscreen Dimensions Machine Depth 2800 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Chsdsz Hxclepfx Afgoc Workpiece clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various SK 40 tool holders Electronic handwheel Coolant system with high-performance pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,649 h, functionality: fully functional, machine/vehicle number: 101161, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 920 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 14,000 rpm, A new spindle was installed one year ago! TECHNICAL DETAILS Travel in X-axis: 1,020 mm Travel in Y-axis: 620 mm Travel in Z-axis: 920 mm Swivel range of B-axis: +30° to -120° Spindle speed range: 1–14,000 rpm Tool holder: SK 40 Tool magazine capacity: 40 Clamping surface of rotary table: 1,200 × 610 mm Csdsz Hwutjpfx Afgehc Diameter of rotary table: 500 mm MACHINE DETAILS CNC control: Heidenhain iTNC 530 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Power: 75 kVA Rated current: 100 A Main fuse: 120 A Machine weight: 8,740 kg Operating hours (according to counter) Spindle running time: 10,649 h Program running time: 11,159 h Machine operating hours: 24,317 h Control operating hours: 26,901 h EQUIPMENT Fixed rotary table NC rotary table WALTER B-axis swivel head with torque drive Vertical tool changer 3D measuring probe Heidenhain Electronic handwheel Fixed full protective enclosure with interior lighting Internal cooling system Coolant system Oil mist extraction Chip conveyor Operating manual

Condition: repair required (used), functionality: limited functionality, Manufacturer: Maschinen Wagner Model: DCE 230 × 1500 Machine type: Lead and feed spindle lathe Chodpfxjz Hpahe Afgsc Machine no.: 2JG0160 Year of manufacture: 1990 Power connection: 380 V / 50 Hz Distance between centers: approx. 1,500 mm Swing over bed: approx. 230 mm* Swing over cross slide: approx. 460 mm* Turning diameter over cross slide: approx. 290 mm* Spindle bore: approx. 60 mm* Max. spindle speed: approx. 1,800 rpm* Main motor: approx. 5.5 kW* Machine weight: approx. 1,800–2,200 kg* Feed: mechanical longitudinal and transverse feed (feed shaft does not rotate, presumably a shear pin has sheared) Thread cutting: functions via lead screw and feed gear Guideways in very good condition. Accessories: Tool holder, tailstock center The machine can be inspected on site.

Condition: used, Year of construction: 2023, operating hours: 2,031 h, functionality: fully functional, machine/vehicle number: 9088000015A, feed length X-axis: 1,100 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, controller model: Sinumerik One, workpiece weight (max.): 1,700 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,700 kg, overall weight: 6,950 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,031 h, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, We offer the transfer of a lease (cession) for a used DMG MORI M2 milling machine. Machine type: M2 Serial number: 9088000015A Year of manufacture: 2023 (first start-up: end of December 2024) Maximum spindle speed: 10,000 rpm Chsdpfsz Hl Ihox Afgec Weight: 6950 kg X/Y/Z: 1100 × 550 × 510 mm Table: 1400 × 600 mm Spindle: up to 10,000 rpm SK40 Sinumerik One High rigidity thanks to the monobloc bed and fixed table (maximum load 1700 kg) First owner Price: LEASE TRANSFER Cession amount: 0.00 PLN Lease installment: 1340 EUR/month (currently the 21st installment out of 72), Total amount of installments to be paid: 68,340 EUR Lease buyout amount: 4200 EUR. The price stated in the advertisement is an indicative value for the entire lease agreement.

Condition: excellent (used), Huron KX30 HSM CNC Vertical Machining Centre Heidenhain CNC control 78.7" x 31.5" x 31.5" travels 20,000RPM spindle 50kW power Chsdpfjz Hdvdox Afgoc 40 Tool automatic tool changer Spindle taper BT40 Year 2001 Chip cnveyor Coolant filtration system Weight 17,000kgs