2Design druk&projekt

Condition: used, Universelle Faltschachtelklebemaschine / Universal Folder Gluing machine Faltschachtelklebemaschine /  Folder Gluing machine ROPI UKM 380 Baujahr / Year 2003  Format / Size min. 60 x 100mm - 500 x 420mm Geschwindigkeit / (Belt) Speed max. 5.000 cycles/h. Nodpfx Aeznhtfjmyjld Materialgewicht / Materials 150 - 450g/m2 Dispersionskaltleim / dispersion adhesive Saugbandanleger für Non-Stop Betrieb / Suction belt feeder for non-stop operation Maschinendimensions / Machine dimensions Machine L 550cm x W 80cm x H 88cm Maschinengewicht / Machine weight 650kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Maschine zum Herstellen von Mappen, Mailings; Hüllen; Machine for producing folders, mailings, and sleeves; Mappen-Falt Klebemaschine / Folder Gluer FIDIA DORA 76 Baujahr / Year 2000 Flachstapelanleger / Flat Pile Feeder Nedpfx Aeznhr Ujmyeld Format min. 150 x 240mm - max. 760 x 1000mm Heissleim Schmelzgerät / Hot-melt adhesive melter ROBATECH Concept 8 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing Nljdpfx Amjzlqzgsysd - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 12-032-SP, total width: 1,900 mm, total length: 17,370 mm, total height: 850 mm, Linear folding and gluing machine equipped with 4 electronically adjustable glue guns for gluing 4/6-corner boxes (ERO). Nlsdpfezin Hhjx Amysd

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1907, type of input current: three-phase, total width: 2,050 mm, total length: 22,100 mm, total height: 1,350 mm, input voltage: 380 V, power of the servo motor: 10,000 W, overall weight: 6,500 kg, cutting length (max.): 2,300 mm, For sale: high-performance, fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME. Built in 2019, this machine is designed for fast, automated production of large-format packaging. Due to its automated feeding and folding system, it is ideal for demanding industrial operations. Key Technical Specifications: Manufacturer: HEBEI Soome Packaging machinery co., ltd. Machine Type: Folder Gluer (Automatic Type) 1400x2800 SMZX-QZD-2800 Model: 1400 x 2800 Year of Manufacture: 2019 Effective Width: 2,800 mm Voltage: 380 V Nsdpfx Amezimggeysld Condition: Operational, robust industrial design, ready for sale. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), paper slitting and rewinding machine YYS-I, year 2023, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME. 2024 and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are available for sale.

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: SM2021609, type of input current: three-phase, total width: 1,900 mm, total length: 3,800 mm, input voltage: 380 V, power of the servo motor: 4,000 W, overall weight: 2,150 kg, For sale: an exceptionally well-preserved and minimally used semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME. The machine was manufactured in 2021, installed in late 2022, and officially activated for production in 2023. Available now due to plant closure. This heavy-duty machine (over 2 tons) is highly reliable and capable of high-speed gluing for large formats of corrugated board (up to an impressive 2800 mm width). Key Technical Specifications: Manufacturer: HEBEI Soome Packaging machinery co., ltd. Machine Type: SOOME SMZX-2800 Year of Manufacture: 2021 (Activated: 2023) Max Cardboard Width: 2,800 mm x 1,500 mm Nedszil Tlspfx Amysld Operating Speed: 0 - 75 m/min Power Supply: 3×380 V/AC, Installed power 4.0 kW Machine Dimensions: 3,800 x 1,900 x 1,700 mm Machine Weight: 2,150 kg The machine is located in Slovenia (Celje region). The electrical installation was renewed in 2023; the unit is connected to power and ready for inspection. The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), paper slitting and rewinding machine YYS-I, year 2023, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME (2024) and fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME (2019) are also available for sale.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: SM240101, type of input current: three-phase, total width: 3,500 mm, total length: 14,000 mm, input voltage: 380 V, power of the servo motor: 15,500 W, overall weight: 7,000 kg, cutting length (max.): 1,650 mm, For sale: practically new, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME. 2024 model in excellent condition, ideal for high-demand packaging. Type: Automatic Folder Gluer, Bottom Locking Type Year: 2024 Effective Width: 1650 mm Nlodjzil Nyepfx Amyed Power: 15.5 kW Condition: Excellent, like new. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), paper slitting and rewinding machine YYS-I, year 2023, fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019 and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME,manufactured in 2021 are also available for sale.

Condition: used, Year of construction: 1995, * Automatic folder gluer * Max width 2050mm Nledpeziarpsfx Amyod

Condition: excellent (used), Year of construction: 2014, type of input current: three-phase, overall weight: 14,000 kg, Paper Bag Production Line – ZBX-300 and ZBX-450 We present a professional paper bag production line, consisting of the main bag forming machine ZBX-300 and the handle making machine ZBX-450. These machines provide high performance, precision, and energy efficiency, meeting the requirements of both small and large production runs. 1. Main bag forming and gluing machine – ZBX-300 • Year of manufacture: 2014 • Weight: 12,000 kg • Power supply: three-phase, 12 kW • Sheet width range: 680 – 1000 mm (depending on the set tabs) • Sheet length: 400 – 600 mm • Bag width: 250 – 430 mm • Paper weight: 80 – 210 g/m² Key features: • Automatic sheet feeding to the forming section, which streamlines and accelerates production. • Centralized lubrication of the slide – ensures smooth operation and minimizes the risk of failure. • Longitudinal forming section – precise shaping of the bags according to the requirements. • Side gluing system – allows for both cold and hot gluing, enabling the production of bags with different properties. • Folding and bottom gluing section – guarantees strong and durable joining, adapted to different bag formats. • Intuitive control – a touch panel and remote control allow for easy operation and configuration of parameters. The machine is distinguished by its energy efficiency, which significantly reduces operating costs. It can operate on various types of paper, including gray, kraft, and coated paper, provided that the paper weight meets the production requirements. 2. Handle making machine – ZBX-450 • Year of manufacture: 2014 • Weight: 2000 kg • Power supply: three-phase, 8 kW This machine enables the automatic forming of handles for paper bags, significantly streamlining the entire production process. Thanks to the use of efficient mechanisms and intuitive control, the machine ensures fast and precise handle production. In addition, the production line is equipped with a paper cord making device, which allows for the comprehensive fulfillment of orders for paper bags with handles. Nlodpfx Amszhwi Nsyed Our paper bag production line guarantees high quality, reliability, and flexible production, tailored to the individual needs of the customer.

Condition: used, Year of construction: 1998, Format: 1100 x 900 mm Equipment: W 1100mm x L 900mm Max format Nsdpfx Amozg Icdsysld W 90mm x L 50mm Min format 200-800gsm plus capable to run E/F Flute Longitudinal seam bonding double longitudinal seam bonding

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, SK-SK Megafold 1850 ref 3007 year: 2018 max width: 1850mm material – flute: E, B, C, EB Nljdpfx Aozb Umtjmyjd alignment after feeder multipoint gluer: – Straight line – Crash lock bottom – 4-corner trays – Squaring system Machine is powered and can be tested.

Condition: new, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, type of input current: three-phase, The MK Diana Smartpacker packs your folding cartons fully automatically into shipping cases in one to four rows downstream of the folder gluer's compression and delivery station. An operator can also feed new shipping cases at a central control station and put sheets into the empty shipping case or insert intermediate sheets. Thus, up to three additional layers can be added semi-automatically. The MK Diana Smartpacker can pack up to 130,000 cartons per hour in shipping cases. It is operated via a touchscreen display. The settings are calculated automatically after entering the production parameters. In addition to placing the folding cartons onto the closure flap in the shipping case, the right and left turning stations allow the cartons to be placed onto crease lines 2 or 4. Nlodpfx Amjzbqwhsyed

Condition: ready for operation (used), Year of construction: 2018, Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible. Nodpfx Aey Sv Syomyjld

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, We are pleased to offer you the following machine, subject to its availability: PETRATTO METRO SD 78 - 2007 Equipment: • FEEDER SECTION: o Friction feeder for thicker paper o Flat pile feeder for thinner paper (envelopes, etc.) • Metro 78 FOLDING AND GLUING UNIT - Metro transport system with 4 programmable outputs - Small plough folder, left and right - Large plough folder, left and right - Folding buckle plate - Folding buckle plate for thinner papers - Turning device - Stream belt delivery with pressure roller • Double-sided adhesive tape applicators x 3 Nljdpfx Amoy Eda Soyed Refurbished, with new rollers, bearings, and belts AVAILABLE: IMMEDIATELY LOCATION: Belgrade, Serbia Installed in Belgrade, Serbia. Testing possible.

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos Njdpey Aagiefx Amyjld sold exactly as pictured

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Window patcher KOHMANN - 750 - age 1999 Single Stream Length punched min. 100mm / max. 1020mm Width punched min. 80mm / max. 750mm Film length min. 50mm / max. 720mm Width film min. 30mm / max. 540mm Timed bottom Feeder Nljdpfx Asyzyhwomyjd Large Selection of Operating Cams Slitting/perforating Film unwind, Continuous Belt Delivery, Suck Blow Pumps Electrical Control Cabinet Manuals Tools Located: Europe Western Current State: In production Available: Immediately More pictures and video is available. PRICE under request.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 1044951, Size 90 cm, straight line, lock bottom, 6 feeder belts, vibrator on feeder, pre-fold station, final fold station Nledpfsyx Trdsx Amyed

Condition: like new (used), Year of construction: 2019, machine/vehicle number: 133901, Folder gluing machine for processing straight-line boxes, crash-lock bottom boxes, double-wall boxes, and CD/DVD sleeves. Feeder with vibrating device, infinitely adjustable distance between carton blanks, pre-breaking crease 1+3, bottom disc glue unit, electronic counter with digital display including preset counter, delivery with kick-out device, drying and press section synchronized with machine speed, can be controlled separately, belt speed 150 m/min. Nlodpfxeyx Tn Eo Amyjd

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Bobst Mistral 110 HHS 4 glue nossels Prefold 1/3 Straight line Crash lock 4 points glue 6 points glue Nledpfoym A Hxsx Amysd Max speed 400 meter per minute Till 800 gsm carton , N, F and E Max format 1100 x 800 mm Min format 126 x 60 mm

Condition: used, Year of construction: 2018, operating hours: 69,000,000 h, functionality: fully functional, Folder gluer machine Folding carton with longitudinal seam: max. 1,150 × 600 mm min. 75 × 55 mm min. 45 × 55 mm (with small carton device) Crash-lock bottom carton: max. 1,150 × 600 mm min. 146 × 80 mm 4-corner box (erected): max. 1,150 × 680 mm min. 120 × 110 mm Nljdpfoyg Edgex Amysd 6-corner box (erected): max. 1,150 × 630 mm min. 250 × 130 mm With BELKHOFF control system Roller and drying tunnel TÜNKERS EAS 480 delivery station, right-hand, year of manufacture 2019

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Nlodpex S Uuyofx Amysd Technical Specifications: Convertible stock Solid up to 700 g/m2 Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Length min 60 mm Drive System Inching speed 8 m/min Operating speed 20 - 400 m/min Crash lock bottom device Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Belt pressing system delivery Main motor 21 kW Dimensions Length 14120 Width 2200 mm Weight 7000 - 10000 kg

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 210927, total width: 2,000 mm, total length: 15,000 mm, total height: 1,400 mm, The machine is being sold because our company's processing division has been discontinued. This Jagenberg Diana gluing machine is the ultimate all-rounder for folding carton gluing. Most of our folding cartons had an open size between 14 and 30 cm, but with a maximum width of 125 cm, large formats are no problem either. The machine can handle straight-line, crash-lock bottom, as well as 4- and 6-corner gluing. It was operated in single-shift mode without any technical issues. We retrofitted the quality inspection system from hhs, which includes product type detection with an ejection station and glue application monitoring. All belts were regularly replaced. The electric motor has been completely overhauled with new windings. The machine's main drive is via a robust coupling system rather than belts, as is common with later models. The machine is user-friendly, with all units easily accessible. Its overall condition is excellent, with only age-related signs of use. If interested, we can provide a video via email. Njdpfxox R Sn Io Amyeld

Condition: used, Year of construction: 2020, Two-sheet gluing machine for large format box production Nledpfxex Rc Sds Amyed

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Nlodpfx Aexwcwwemyed Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: used, Year of construction: 2014, functionality: fully functional, Type: Manual Fed In-line folding, gluing and taping machine Nedpjxnzn Nefx Amysld Manufacturer: Lamina system AB, Sweden Model: Gluer 2200GL Year: 2014 Max. format width: 2200 mm Min. format width: 70 mm Gluing unit: Nordson Production speed: 0 – 40 m/min, infinitely variable. Power: 5 kW 20 A Connection: 3x220 VAC PE 50/60 Hz Compressed air: 6 Bar Control console: PLC control with Touch Screen Machine size: W 2800 x L 2550 x H 1450 Weight: 950 kg Brochure find below