Condition: new, Exhibition compressor from our showroom | Like new Advantages: Deln Ntsvap U Eokfokl * HANDIER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency * With sound insulation hood, extremely quiet * The sound-insulating hood enables installation even in sensitive areas * Container with baked-on inner coating * 15-year guarantee on container against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * Space-saving solution with upright container Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Vessel volume 90 l Weight 162 kg Noise 69 dB(A) Dimensions (WxDxH) 775x740x1275 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4.0 kW Volume: * Sound pressure level LPA: No manufacturer specifications at a distance of 4 m according to 79/113 EEC, L(PA4) * Sound power level LWA: 69 dB(A) according to DIN EN ISO 3744 (RL 2000/14/EG) * The following correlation is important in practice: The sound power level of technical sound sources at a measuring distance of 1 m is usually approx. 10 to 15 dB higher than the sound pressure level. Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon. - Fri. from approx. 7 am - 5 pm, delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you do not receive a shipment yourself

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER industrial piston compressor with refrigeration dryer Demonstration machine Suction capacity 700l/min (delivery 570l/min) Dsln Ned Dhwnetkfskl Maximum pressure 10 bar Pressure tank 270l Motor power: 400V 4.0 kW, Dimensions: 970 x 795 x 1880mm upright design for industrial applications, robust belt guard, galvanized compressed air tank according to AD2000 guidelines (with hand hole) with intercooler and aftercooler, oscillating metals for effective reduction of vibrations, with refrigeration dryer, opt. with automatic condensate drain for refrigeration dryer and tank; various other versions available

Condition: excellent (used), Year of construction: 1988, We are offering two identical compressors from the reputable manufacturer Mannesmann Demag AG, model SE116S, manufactured in 1988. Both units are well-maintained and in good working condition, ready for industrial use. Specifications: Volume flow: 11.2 m³/min Operating pressure: 10 bar Motor power: 75 kW Rotational speed: 1500 rpm Total weight: 1760 kg Dkelnsu Tukys Ntkfel

Condition: used, Atlas Copco GA 410 Deljrw H Daen Ntkfjkl

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 2 control Year of construction: 2022 Operating hours: 1.5 operating hours Deln Nohhiw Nstkfjkl Technical data: Volume flow at 10 bar: 0.67 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 260 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 2011, operating hours: 11,000 h, Functionality: fully functional, machine/vehicle number: 1008570, pressure (max.): 8 bar, Equipment: type plate available, Kaeser SX6 Well maintained bj. 2011 4.0kw Dslju Rruyen Ntkfjkl 8 bar 11.000 Hours Made in Germany

Condition: new, Exhibitor - Atlas Copco screw compressor G 5 - 10FF TM (200l tank) Condition: very good Dslsvap Ufon Ntkfskl Usable volume flow at the outlet of the compact system: at operating pressure 9.5 bar 13.0 l/s 0.78 m3/min Technical data: Intake pressure 1 bar Intake temperature 20 °C relative humidity 0 % Rated motor power 5.5 kW Rated motor speed 2,905 min-1 Compressed air temperature after dryer 25 °C Oil capacity 2.5 l Residual oil content

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, operating pressure: 11 bar, pressure (max.): 11 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Renner REKO 700D/90 - Demonstration machine Djlnju Ttlce Ntkfskl Mobile piston compressor with tank With all safety fittings and electrical connection cable with plug and Condor pressure switch with operating hours counter as standard Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve Fully automatic operation thanks to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use - oscillating metals for stationary installation included in the scope of delivery With V-belt drive, 2 cylinders arranged in series for particularly quiet operation Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Option at extra cost: filter pressure reducer for regulated compressed air and compressed air cleaned of condensate, dirt and oil from a tank volume of 50 liters With device supply line and air outlet via safety coupling NW 7.2 Suction capacity 727 l/min Eff. Delivery rate 570 l/min Nominal power 4.0 kW Voltage 400 V Max. Pressure 11 bar Cylinder/stages 2/2 Speed 1000 rpm Sound level 95 dB(A) Compressed air tank 90 l Dimensions L x W x H 1030 x 483 x 1100 Weight 128 kg

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: APF271056, TECHNICAL DETAILS Dryer type Type: Heat-regenerating adsorption dryer Mode of operation: Moisture removal through adsorption process Control: Smart cycle control algorithm for energy saving at partial load Performance and capacity Pressure dew point: -40 °C (optionally -70 °C) Pressure drop: Minimized by generous design of tank and piping Assembly and installation Base frame: All components assembled and fully wired, ready for installation EQUIPMENT Dkeln Nju Rdfketkfjl Pressure dew point sensor Tank insulation Fan filter

Condition: like new (used), Year of construction: 2017, I. AIR COMPRESSOR ALUPP ALLEGRO 200DW Producer: ALUPP KOMPRESOREN Type: ALLEGRO 200 DW Pressure: 8 BAR Capacity: 36 m3/min. Voltage: 400 V Frequency: 55 Hz Serial No. TRD128835 Motor: 200 kW/ 2983 rpm Dkelsi Ewlqjn Ntkfol Production date: 09/2017 Weight: 4840 kg Counter: 19.782 h AIR DRYER MTA MG090/A Producer: M.T.A. Type: MG 090/A Serial No. 2200224826 Voltage: 400 V Frequency: 50 Hz Max air in: 65 celsius Motor: 13 kW Production date: 2013 Weight: 551 kg Refrigerant: R407 C 9,8 kg *Auxiliary systems available

Condition: as good as new (ex-display), Year of construction: 2022, New speed controlled ALMIG LENTO 22 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control P Technical specifications Type: LENTO 22 LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Dksljh Unpren Ntkfsl Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 3,67 m³/min at 6 bar min/max : 1,00 to 3,46 m³/min at 7 bar min/max : 0,97 to 3,29 m³/min at 8 bar min/max : 0,93 to 3,06 m³/min at 9 bar min/max : 0,90 to 2,82 m³/min at10 bar min/max : 0,87 to 2,58 m³/min elektric motor power: 22 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 67 dB (A) 100% load: 69 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 910 kg Compressed air connection: G 1 inch

Condition: ready for operation (used), Year of construction: 1989, operating hours: 41,309 h, Functionality: fully functional, machine/vehicle number: BS-SERV03, Sn: 2141962, overall weight: 840 kg, total length: 1,575 mm, total width: 1,020 mm, total height: 1,340 mm, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 300 m³/h, operating pressure: 8 bar, Equipment: documentation/manual, type plate available, Kaeser BS50 screw compressor Operating pressure, 7.5 bar Delivery rate, 5 m3/min Main motor, 30 kW Mains connection, 400 V / 50 Hz Dolju Iwn Hon Ntkfokl Soundproof housing Ready for use, currently not under power Maintenance interval, annual maintenance documentation from Kaeser available Last maintenance, 10.06.2024 Motor newly stored and checked at approx. 40,000h Operating instructions included in scope of delivery incl. Funke heat exchanger see photos, Water as heat transfer medium Loading by us with forklift included

Condition: new, Exhibitor compressor Schneider AM B 7-10 Operating hours 4 h Features: Dksln Ntkjvap Uxefsl * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Durable, V-belt driven compressor blocks * AIR ENERGIE CONTROL 3 electronic control unit with direction of rotation control, display of operating hours, service messages, load hours, etc. * 12 months warranty Technical data compressor AirMaster Professional Solo . H707100 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 1.1 m³/min Compressor speed 4,523 min-1 Rated power drive motor (V/Hz) 7.5 kW (400 V / 50 Hz) Motor efficiency 90.1 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,260 m³/h Ambient temperature min. / max. +5°C / +40°C [pressure difference T] +16°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 63 dB(A) Air outlet connection 3/4 "i Tank capacity - Dimensions (W x D x H) 1100 mm x 690 mm x 1100 mm Weight 246 kg

Condition: new, feed pressure 8 bar Effective free air delivery 235/165 L/min Receiver capacity 50 / 10 l / bar weight of the machine ca. 37,5 kg. Number of cylinders 2 Stk. motor 230V / 1,5KW V / KW range L-W-H 790 x 400 x 730 mm This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. Dkolnju Imp Hj Ntkfsl ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: like new (used), Year of construction: 2017, AIR COMPRESSOR ALUP ALLEGRO Manufacturer: ALUP KOMPRESOREN Type: ALLEGRO 200 DW Dkjln Njkx E Rcotkfol Pressure: 8 BAR Capacity: 36 m3/min. Voltage: 400 V Frequency: 55 Hz Serial number TRD128835 Motor: 200 kW/ 2983 rpm. Production date: 09/2017

Condition: as good as new (ex-display), Year of construction: 2024, New speed controlled ALMIG LENTO 37 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control P Technical specifications Type: LENTO 37 LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Djleh Unqaon Ntkfjkl Delivery quantity at minimum / maximum speed: at 5 bar min/max : 2.10 to 6.57 m³/min at 6 bar min/max : 2.04 to 6.29 m³/min at 7 bar min/max : 1.98 to 6.00 m³/min at 8 bar min/max : 1.91 to 5.70 m³/min at 9 bar min/max : 1.85 to 5.30 m³/min at10 bar min/max : 1.79 to 4.98 m³/min elektric motor power: 37 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 68 dB (A) 100% load: 70 dB (A) Length: 2300 mm Width: 1400 mm Height: 2265 mm Weight: 1650 kg Compressed air connection: G 1 1/2" inch

Condition: new, Exhibitor compressor Schneider compressor AM B 5-10 Screw compressor Condition: like new Features: * Simple handling and maximum ease of use thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Durable, V-belt driven compressor blocks * AIR ENERGIE CONTROL 3 electronic control unit with direction of rotation control, display of operating hours, service messages, load hours, etc. Technical data compressor AirMaster Professional Solo Dkeln Nsufp Hgotkfol . H705100 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 0.7 m³/min Compressor speed 3,175 min-1 Rated power drive motor (V/Hz) 5.5 kW (400 V / 50 Hz) Motor efficiency 89.2 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,080 m³/h Ambient temperature min. / max. +5°C / +40°C [?T] +14°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 62 dB(A) Air outlet connection 3/4 "i Tank capacity - Dimensions (W x D x H) 1100 mm x 690 mm x 1100 mm Weight 241 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 7 h, machine/vehicle number: MA0036_S0053901, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) Year 2024 / IMMEDIATELY AVAILABLE! Hours: 7 h Technical specifications Type: BELT XP 8 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 0.99 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 800 mm Dkslnsd S Dq Es Ntkfel Width: 670 mm Height: 1100 mm Weight: 274,5 kg Compressed air connection: G 3/4 "

Condition: new, Exhibitor compressor Schneider compressor AM B 4-10 Condition: very good * Simple handling thanks to easy-to-understand electronic controls * Little space required due to compact dimensions * Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct Dkslnsufpz Re Ntkfsl * Durable, V-belt driven compressor blocks * AIR ENERGY CONTROL 3B electronic control unit with display of operating hours, service messages, load hours, etc. Technical data compressor AirMaster Professional Solo . 4152052419 Compression end pressure 10 bar Working pressure Volume flow at working pressure (ISO 1217) 516 l/min Voltage 400 V Drive power 4 kW Weight 120 kg Noise 62 dB(A) Air outlet 3/4" Dimensions (W x D x H) 620mm x 630mm x 950mm

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, volume flow: 124 m³/h, Exhibit: RENNER RKT + 0125 compressed air dryer with level-controlled condensate drain Year of manufacture: 2022 Volume flow: 2.08 m³/min (at 7 bar and ambient temperature of 25°C) Pressure dew point: 3°C Dkeln Ntksu Iwc Refol max. pressure: 16 bar Connection thread: G 1 1/4" Dimensions: Length: 345mm Width: 525mm Height: 851mm Weight: 45kg Convenient leasing for new machines is possible through our bank. Visit our store. We always have a large selection of new and used compressors in stock! Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Condition: new, Exhibitor compressor Features: * Durable, V-belt driven compressor blocks * Motor and compressor protection against overheating * With integrated refrigeration dryer mounted on tank and fine filter * Ready-to-use system thanks to integrated refrigeration dryer * Optimum work results thanks to dried compressed air * Low space requirement due to compact dimensions * Time and cost savings in case of maintenance due to easily accessible arrangement of all maintenance parts * Low noise due to soundproof housing * Simple installation of an exhaust air duct * Prevents expensive damage during commissioning thanks to integrated direction of rotation control Technical data compressor: . H705106 Compressor discharge pressure 10 bar Working pressure 9.5 bar Volume flow at working pressure (ISO 1217) 0.7 m³/min Compressor speed 3,175 min-1 Rated power drive motor (V/Hz) 5.5 kW (400V/50Hz) Motor efficiency 89.2 % Protection class drive motor IP 55 Required cooling air requirement (20°C ambient temp.) 1,080 m³/h Ambient temperature min. / max. +5°C / +40°C Oil capacity 3.1 l Sound pressure level (LPA1 -DIN 45635 T13) 62 dB(A) Air outlet connection 3/4 "i Tank capacity 270 l Dimensions (W x D x H) 1550 mm x 690 mm x 1560 mm Weight 338 kg Technical data refrigeration dryer DK 1200 SMART: Dsln Ntjufp Hmjkfokl Volume flow at pressure dew point +3°C 1200 l/min Pressure 7 bar Pressure loss 0.25 bar Voltage 230 V/50 Hz Max. Power consumption 0.27 kW Air connection 3/4 "a Refrigerant charge R134a

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 7 h, Functionality: fully functional, Demonstration machine (prototype / zero series) available immediately (Plug and Play): Frequency-controlled RENNER RSF-PRO 7,5 - (6 at 10 bar) oil-injected screw compressor Control: -RENNERtronic touch Operating hours: 7 Pressure: 6 to 10 bar Rated power: 7,5 kW Delivery quantity: 0,42 to 1,37 m³/min ( 6 bar) 0,41 to 1,30 m³/min ( 7 bar) 0,39 to 1,24 m³/min ( 8 bar) 0,36 to 1,18 m³/min ( 9 bar) 0,33 to 1,09 m³/min (10 bar) Sound level: 62 dB (A) Compressed air outlet: G 1/2 " Dimensions length x width x height: 824 x 553 x 1014 mm Dkoln Nju Ivyhotkfol Weight: 237 kg

Condition: new, Exhibitor compressor Advantages: * HANDIER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency * Tank with baked-on inner coating * Comes with all fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain valve and stopcock * Equipped with rubber oscillating elements as standard * With refrigerant dryer and bypass line * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for simple connection of an Ecomat condensate drain * High-performance refrigeration dryer with Super-Dry Technology and ECO switch-off * Start-up via an automatic star-delta switch is mandatory for all compressors and units from 5.5 kW. This is not included in the scope of delivery, but the start-up relief is: * 15-year guarantee on containers against rusting through * The low speed reduces vibrations, protects the compressor components and reduces noise * Better compressed air quality and work results * Intercooler and aftercooler ensure rapid cooling of the compressed air produced * The refrigeration dryer removes the condensate from the compressed air Dkeln Nteufp Idjkfsl * Equipped with a bypass line as standard * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) Technical data Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Vessel volume 270 l

Condition: new, Exhibitor compressor Advantages: * HANDLICHER - with lower ball valve and higher positioned hand hole * COMFORTABLE - with rubber swing elements Features: * V-belt driven 2-cylinder unit with two-stage compression for 10 bar or increases performance and ensures high efficiency * Tank with baked-on inner coating * 15-year guarantee on tank against rusting through * All fittings as standard: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensation drain cock and stopcock * Equipped with rubber oscillating elements as standard * Electrical connection 400 V/50 Hz (three-phase current) * For compressors with a 4 kW motor, the regulations of the local electricity company must be observed * For all compressors and units from 5.5 kW, starting via an automatic star-delta switch is mandatory. This is not included in the scope of delivery, but the starting relief is * Intercoolers and aftercoolers ensure rapid cooling of the compressed air produced * The low speed reduces vibrations, protects the compressor components and reduces noise * Large fan flywheel for optimum cooling * Easily accessible condensate drain under the tank. Also suitable for easy connection of an Ecomat condensate drain * Easy retrofitting of a refrigeration dryer possible * Easy retrofitting of a sound insulation hood possible (for compressors with 4 kW motor) * Space-saving solution with upright tank Technical data Dkslnjufp Ikj Ntkfjl Pressure 10 bar Suction capacity 660 l/min Speed 1025 min-1 Volume 500 l Weight 215 kg Noise 78 dB(A) Dimensions (WxDxH) 850x850x1945 mm Eff. delivery 520 l/min Air outlet 3/4 "i Drive power 4 kW Please note that this item is delivered by a forwarding agent, usually 1-3 working days after receipt of payment. The delivery times of the forwarding agents are Mon.- Fri., from approx. 7 a.m. - 5 p.m., delivery days and times depend on the route planning of the forwarding agent, we have no influence on this. Saturday delivery is not possible. If you are unable to accept a shipment yourself, please ask a roommate or neighbor to accept it: If you refer to a neighbor, it makes sense to leave a note for the carrier on the front door or doorbell sign on the expected delivery days. Please be sure to include a telephone number with your order. Thank you very much.

Condition: new, Exhibitor - Schneider compressor AM D 7-13 XVSDK Screw compressor Condition: Very good Features and benefits: * The graphically structured AIR ENERGIE CONTROL 3+ control unit makes it easy to operate the compressor * Extremely quiet compressors thanks to special noise insulation * Quiet and extremely efficient operation thanks to directly driven compressor stages with or without gearbox. * Highest economic efficiency High volume flow with low energy consumption - the variants are therefore BAFA-compliant * Easy maintenance Time and cost savings during maintenance due to easily accessible arrangement of all maintenance parts. No V-belt replacement necessary thanks to direct drive Technical data AirMaster Variable Speed compressor: Doln Ntkjufpzqefokl . 4152017980 Compression end pressure 13 bar Working pressure 5 - 13 bar Volume flow at working pressure 7 bar (ISO 1217) 270-1224 l/min Voltage 400 Volt Drive power 7.5 kW (400V/50Hz) Weight 281 kg Noise 64 dB(A) Air outlet 3/4" Dimensions (W x D x H) 1415 mm x 655 mm x 1045 mm