Condition: new, Year of construction: 2024, machine/vehicle number: TR0067_TA8, New compressed air refrigeration dryer KAESER TA1A with energy-saving SECOTEC control. with electronically controlled condensate drain with cold storage Year of construction: 2023 Technical data: Flow rate: 0.80 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Dsln H Hajhu R Hnsmokl Ambient temperature: +3°C to + 43°C max. Compressed air inlet temperature: + 55° C Compressed air connection: G 3/4" Dimension (W x D x H): 630 x 484 x 779 mm Weight: 80kg electrical supply: 230 V / 1 / 50 Hz Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Condition: used, Bosch valve coil 1824210059 * 2 pieces. Dksln H Helkchksamjl

Condition: ready for operation (used), Year of construction: 2013, operating hours: 52,000 h, Functionality: fully functional, machine/vehicle number: UCV100089, overall weight: 776 kg, power: 45 kW (61.18 HP), pressure (max.): 10 bar, Equipment: type plate available, type: Ingersoll Rand Model: R45N A10 Machine number: UCV100089 Year of construction: 2013 Dksln Hsvmhagj Hamol Operating hours: 52000 Condition: good working order Max working pressure: 10 Bar Power: 45Kw Weight: 776 Kg Voltage: 400 Volt 3Phase/50Hz Compressor has been replaced in working order by a machine with more capacity.

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: SKE000052, total length: 1,070 mm, total width: 1,200 mm, total height: 1,960 mm, cooling capacity: 27.82 kW (37.82 HP), The TCX4-90A series from Atlas Copco is a compact all-in-one chiller with an air-cooled condenser with integrated hydro module. The TCX28A chiller is specially designed for cooling water (or a mixture of water and glycol) for a wide range of industrial processes. Atlas Copco chiller TCX 28 A (indoor installation / +5°C) with integrated tank and 3 bar pump group Cooling capacity: 27.8 kW (37.2 kW) Absorbed power: 9.35 kW (9.33 kW) Water connection 2" Dsln H Hetq Twnjamskl Dimensions: 1067x1200x1960 mm lxwxh Used machine from year of construction 2022, very good condition, fully functional, without warranty

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch Dkoln H Hsfmim Uoamjl - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: excellent (used), Year of construction: 2020, Used refrigeration dryer from NEQXUS Model: NEQXUS QX366R/AC Year of manufacture 11.2020 Power 230V PERFORMANCE 366M³/H For further technical data see photos Dimensions approx: width 56cm depth 58cm height 89cm Last maintenance 08.08.2023 Very good condition New price approx. 3500 euros gross See pictures Viewing and collection possible Shipping Germany (excluding islands) 120.00 euros net The goods can be viewed at the 59379 Selm location by appointment. You will receive an invoice with VAT shown. Delnjvl T Rbj H Hamjkl Payment information: Payment by bank transfer before delivery of the goods. Or cash on collection.

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 102147.10340, overall weight: 4 kg, Kaeser F26KC cyclone separator with ECO-Drain 31 steam trap suitable for up to 2.6 m³/min compressed air. KAESER KC cyclone separators remove condensate from the compressor's compressed air outlet. They are a must for trouble-free and energy-efficient operation of downstream dryers and filters. KC cyclones are supplied with the economical and particularly reliable ECO-DRAIN 31 steam trap as standard – including test button and alarm contact, of course. In addition, they are particularly easy to combine with KAESER filters and can be fixed to the wall with optional wall brackets. This makes installation particularly easy. Specifications: Volume flow 2.6 m³/min Connection compressed air inlet: G 1" min. overpressure: 2 bar Max. overpressure: 16 bar Weight : 4.0 kg Dimensions W x D x H : 241 x 225 x 515 mm Condensate drain: ECO Drain 31 Dkolnovm Ahls H Hamsl Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: used, Pressure gauge BIESSE 2424A0007, Deln Holkchye Hamokl

Condition: good (used), Functionality: fully functional, flow rate 1100l/min Dkelnovcbx Uo H Hamel maximum pressure 16bar year of production 2000 CE-marking power supply 230v

Condition: ready for operation (used), Year of construction: 2012, operating hours: 30,000 h, Functionality: fully functional, power: 37 kW (50.31 HP), fuel type: electric, operating pressure: 13 bar, pressure (max.): 12.5 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco GA 37 VSD FF - used premium screw compressor Speed-controlled screw compressor, air-cooled, oil-injected, full feature incl. integrated refrigeration dryer incl. heat recovery system Used device from year of manufacture 2012, functional, approx. 30,000 operating hours, without warranty Technical data: Motor power: 37 kW Refrigeration dryer: integrated Doln Hovcmwcs Hamokl Compressed air connection: G 1/2" Dimensions in mm (LxWxH): approx. 1766x970x1800 Weight: approx. 1,130 kg Max. pressure: 12.5 bar Volume flow: at 4 bar up to 7.43 m3/min, at 7 bar up to 7.32 m3/min, at 9.5 bar up to 6.40 m3/min at 12.5 bar up to 5.24 m3/min

Condition: used, PARKER HIROSS compressed air dryer for compressor systems Refrigeration dryer with water-cooled aftercooler for removing water vapor and cooling compressed air or gases. 1 aftercooler type WFN009 DHH16 Standard air flow rate: 540 m3/h = 9000 liters/min. Operating pressure air: max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded connection air: G 2" Threaded connection water: G 3/4" Weight of the aftercooler: 11 kg Dimensions of the aftercooler L x W x H 1030 x 850 x 200 mm + 1 piece water separator type CSP 008 Normal volume flow: 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 piece HIROSS SAC 120 mechanical condensate separator Threaded connections: R 1/2" Operating pressure: 16 bar Dkeln H Hajdzqn Usmol Volume: 0.8 liters - Works without loss of compressed air everything mounted as shown in the pictures Height upright mounted 2000 mm Weight complete approx. 40 kg 2 identical units available

Condition: good (used), Year of construction: 1990, Stock number: 2845 Make: Mattei Year of construction: 1990 Dksljtzmp Son H Hamol Type: ERC 120/AP Number: 49540 GEDBCE1B1A On hours: 14,563 h Pressure: 8.6 bar (?) Output: 3.65 m³/min (?) Connection: 22 kW Total dimensions: 1,700 x 800 x 1,500 mm Weight: approx. 0.5 t

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage compression mobile piston compressor The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard Dkjln H Hsvl Ev Aeamel with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 674 l/min., filling capacity 505 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1 , Engine power 4 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: used, * Pneumatic valves suitable for WEINIG type UNIVAR 10 or similar * Standard actuation on both sides or spring return Dkoln H Helkckqoamel * Number: 27, Price per piece: €25.00 + VAT.

Condition: good (used), flow rate 1100l/min Dslsvcbxben H Hamskl maximum pressure 20bar weight 30kg CE-marking power supply 230v

Condition: excellent (used), Year of construction: 2019, 1 x screw compressor Almig first air FAS 7 - 10 Year of construction: 2019 with refrigeration dryer Djln H Haeu Hkchsmekl first air MKE 100 + Kessl sea DR 270 11 Z Nice compact system with few operating hours. The compressor can be inspected under power.

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Ideal for 3 dental chairs – minimal space requirement due to compact design. Specifications: Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Number of steps : 1 Deln Hjvlw Haj Hamjkl Number of cylinders : 2 Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Depth : 500 mm Height : 980 mm Weight : 89 kg Compressed air connection : G 3/8

Condition: excellent (used), Year of construction: 2014, volume flow: 18.4 m³/h, operating pressure: 8 bar, BOGE S 150 screw compressor 110 KW engine Capacity 18.40 m3/min Dslnjt Au Tbo H Hamjkl Pressure 8 bar Year of production 2014 Mileage 18,000 hours THE COMPRESSOR IS FULLY FUNCTIONAL.

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, engine power 3 kW / 400 V Djlovl Euxsn H Hamskl from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: used, power: 5,5 kW Max. operating pressure: 8 bar Compact screw compressor system for generating compressed air for workshops or machines with tank and condensate separator. Fully automatic, soundproofed and vibration-insulated with very few operating hours. Dolotq Nmhjn H Hamokl Optional: Service New (€750.00 plus VAT)

Condition: not inspected (used), Functionality: unexamined, From stock clearance: Festo DNC-50-545 PPV-A with signs of wear due to storage Djln H Hajq Htd Usmokl untested 11 pcs. available

Condition: good (used), Year of construction: 1992, machine/vehicle number: 345782, total length: 1,670 mm, total width: 650 mm, total height: 1,300 mm, power: 4 kW (5.44 HP), fuel type: electric, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (max.): 50 °C, Equipment: type plate available, Type: SB 675-25/350 YEAR OF MANUFACTURE: 1992 Stroke volume: 675 l/min Deln H Hasuiwbtemskl Speed: 700 rpm (RPM)

Condition: excellent (used), 11 kW motor 400l tank Dkslet Agfcsn H Hamol Efficiency 70m3/h

Condition: excellent (used), total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Dkeln H Hajp N H Huemsl Unfortunately no documents available.

Condition: used, Screw compressor KAESER type BS 50 Dkeln Hoiyu Ifj Hamsl Make No. 402852 Year of manufacture 1990 volume flow 5 m³/min. pressure output 7,5 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz connection thread 1 1/2" inch - 1107,90Operating hours read off - 749,00 Load hours read - Soundproofed Space requirement L x W x H 1600 x 1070 x 1350 mm weight 900 kg good condition