Screw compressor

BOGE S 150-3

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Tjdpfx Amoxp Rb Ieyja

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, overall weight: 5,770 kg, total length: 15,050 mm, load capacity: 12,500 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: double-girder – Capacity: 12,500 kg – Lifting height: 6 m – Year of manufacture: 2018 – Hoist type: steel wire rope – FEM/ISO hoist: 1Am / M4 Dimensions – Span: 15,050 mm centre-to-centre – Installation height: 970 mm – Width of wheel set incl. buffers: 3,370 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Total weight: 5,770 kg (of which trolley 846 kg) Speeds – Hoisting: 5/0.8 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Specifications – Control: Abus radio control, including spare transmitter – Crane manual available: yes – Dismantled: yes, available immediately – Hour meter: 306 hours (as of 26/6/2025) Todey T Hfgjpfx Amyoa – Last service: 26 June 2025 – Condition: in very good condition, well maintained

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Tedpfxsy D Npio Amysa Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Tedornnt Ijpfx Amyja Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Tedjt A Uyuopfx Amyja Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Year of construction: 1989, condition: reconditioned (used), The filter press was revised and checked by our workshop in 2023. Name: Chamber filter press Manufacturer: Passavant Type: AX1200 Year built: 1989 / 2023 Construction form: Bridge beam press Filter pressure:: 15 bar Press content: Approx. 2200 liters Cycle: Closed Tsdpfol Uvxkox Amysa Filter area: Approx. 155 m2 Plate size: 1200 x 1200 mm Number Plates: 62 Plate material: Polypropylene Plate Transport: Automatic Plate pack length: Approx. 4200 mm Cake thickness: 30 mm Dimensions: L 7600 x W 1600 x H 2250 mm Message: Workshop revised in 2023 Accessories: A control cabinet and a hydraulic system Condition: Used good Price: On demand

Condition: used, Year of construction: 2019, CNC gantry plasma cutting machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle, 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) Tsdpfxoyay H Aj Amyoa 1 x Nesting program on the CNC control ä22726

Condition: excellent (used), Year of construction: 2013, overall weight: 755 kg, volume flow: 316.2 m³/h, PROD. KAESER TYPE - ASD47 SFC S/N - 3068 YEAR - 2013 POWER (kW) - 25 OUTPUT. (m3/min) - 1.07-5.27 CIS (bar) 8.5 WAVE - yes Todpfora Akzsx Amyea BUILT. DRYER - no EXCHANGER - yes

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to spend three minutes on a phone call than to exchange emails for three days. TSWi 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is installed in the wall Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust pipe: 400 Ø mm Depth: 900 mm Double filtration: Paper filter + Paint stop filter mat Clamping bar (+ EUR 150.00 net) Options/additional cost for: Transition from square to round: EUR 150.00 net Tjdpfsfr T Eqex Amyoa Paint stop filter mat with clamping bar: EUR 150.00 net Side guide plates with hinge: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with a supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning, in very good condition. Filter area: 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan, drive power: 22 kW; volume flow: 6700 m³/h; pressure: 8000 Pa Compressed air valves: ASCO 24 Volt Number of filter pockets: 48 Tedpfofg Iphox Amyja Filter medium: no longer available Insulation: Yes With differential pressure measurement Dimensions L/W/H: 3000 mm / 1700 mm / 2100 mm (up to outlet) The filter consists of 2 modules that are divided in the middle. Also available: Stainless steel cooling screw conveyor, diameter 400 mm, length 4100 mm.