Condition: excellent (used), Year of construction: 2014, operating hours: 26,000 h, functionality: fully functional, overall weight: 1,603 kg, power: 55 kW (74.78 HP), 2014 Ingersoll Rand R55i Compressor Djdpfszrxhhex Akvowa 55kw screw compressor Full service history Approx 26k hours Very good condition

Condition: excellent (used), Year of construction: 2018, operating hours: 43,309 h, functionality: fully functional, Screw compressor Atlas Copco GA75VSD+FF Inverter and dryer integrated 75 kW 12.75 bar 15.50 m3/min Dedpfozp Urwox Akvswa Year of manufacture: 2018 Operating hours: 43,309

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min - Maximum pressure: 10 bar Dwedpfjzrn Ahox Akvja - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 - Switching range: 8.5–9.5 bar - WILO industrial circulation pump Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Location: 65618 Selters (Taunus), Germany.

Condition: good (used), functionality: fully functional, Sharpening machine for rotary cutting tools. 4 positions. Dwsdpozrnmasfx Akvsa

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Dedpfszrnc Ijx Akvjwa Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. User-friendly in every detail. Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort.

Condition: used, Year of construction: 2021, functionality: unexamined, For sale is a high-quality, oil-free RENNER scroll compressor, model SLDK-S 5.5, with an integrated refrigerant dryer and pressure vessel. Technical data: Year of manufacture: 2021 5.5 kW 627 l/min flow rate 8 bar operating pressure 400 V / 50 Hz / 3 phases Oil-free compressed air generation SCROLLline SuperSilent Dsdjzrl Dvspfx Akvjwa Integrated refrigerant dryer Pressure vessel The compressor comes from a company acquisition. The unit has not been used since August 2022. Therefore, we cannot make any statement about its current functionality and are selling the unit expressly as untested. Visually, the unit is in very good condition. The original operating manual is available. Inspection is possible by appointment. Sale from company stock. The sale is made with the exclusion of any warranty for defects in materials, to the extent permitted by law. If you have any questions or require further information, please send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: L030748, overall weight: 2 kg, warranty duration: 3 months, pressure: 7 bar, The Scell-it® E-312NP pneumatic riveting tool for self-clinching nuts offers reliability, precision, and functionality, making the installation of self-clinching nuts quick and easy. Below, we provide additional information regarding the replacement of the nose/mandrel, stroke adjustment, and self-clinching nut installation, to enable you to fully utilize the potential of this tool. Nose/Mandrel Replacement: Detailed instructions for replacing the nose and mandrel can be found in our comprehensive operating manual. If you intend to use self-clinching nuts of different diameters, it will be necessary to change the nose, mandrel, and adjust the tool accordingly. Consult the instructions to learn how to make these changes and adjust the mandrel length to the size of the self-clinching nut. Self-Clinching Nut Installation: After performing the startup procedures and adjusting the stroke, insert the self-clinching nut into the pre-drilled hole. Place the mandrel in the self-clinching nut and press the tool. The mandrel will automatically seat itself in the self-clinching nut. Press the tool trigger to clamp the self-clinching nut onto the component. The release will occur automatically after the self-clinching nut has been clamped onto the component, allowing you to release the tool. If the tool is not released from the self-clinching nut, press the button on the back of the tool to force the release. Stroke Adjustment: The tool stroke must be adjusted to the component on which the self-clinching nut will be clamped. The E-312NP riveting tool allows stroke adjustment from 1 mm to 7 mm. To adjust it, follow the instructions below: Dsdpfx Akezc Dx Isvswa Precise stroke adjustment is crucial for effective self-clinching nut installation. Here are some tips for controlling stroke adjustment: The stroke can be set from 1 mm to 7 mm. The graduated scale on the tool accurately indicates the set stroke. To increase the stroke, move the adjustment slider towards the front of the tool, while simultaneously turning the knob to the left. Then release the slider, ensuring that it is re-seated on the head. The cursor will indicate the range of the set stroke. To decrease the stroke, follow the same procedure, turning the stroke adjustment knob to the right. Our self-clinching nut riveting tool is designed to allow precise stroke adjustment and ensure optimal installation results. If the stroke is incorrectly adjusted or the self-clinching nut has a quality defect, the mandrel release may be difficult. In this case, use the "anti-block rod," which is included in the kit. Insert it into the hole in the base of the sleeve and turn it to the right to release the self-clinching nut, as shown in the illustration in the manual.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: C00514-202107, overall weight: 2 kg, total length: 250 mm, total height: 94 mm, pressure (min.): 6 bar, ambient temperature (max.): 50 °C, noise level: 82 dB, Equipment: documentation/manual, type plate available, We offer this Chicago Pneumatic CP3550-085AA demo machine, a pneumatic grinder/polisher, manufactured in 2024. Rotational speed (max.): 8500 rpm Replacement packaging – machine used at a trade show, complete with tools and accessories. Manufacturer's warranty: 12 months. If you have any questions or require further information, please send a message or contact us by phone. Dwedpfxezcuw Uo Akvsa

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, total length: 326 mm, total height: 119 mm, air pressure: 6 bar, spindle motor power: 1,500 W, spindle nose: 5/8, tool weight: 3,500 g, We offer this demonstration machine: ATA RA6AVH angle grinder, 230mm (7") disc, manufactured in 2026. Manufacturer: ATA Model: RA6AVH Year of manufacture: 2026 Disc diameter: 230 mm Power: 1500W (on the spindle) Anti-vibration handle included as standard Djdpfxjzcuy Ns Akvswa The machine is covered by a one-year manufacturer's warranty. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 9 kg, total length: 500 mm, pressure (max.): 8 bar, noise level: 102 dB, spindle nose: 1'', spindle torque (max.): 2,400 Nm, Equipment: documentation/manual, type plate available, We offer this new Chicago Pneumatic CP7783-6 impact wrench, manufactured in 2025. Manufacturer: Chicago Pneumatic Model: CP7783-6 Year of manufacture: 2025 Category ID: 651 Dwodpfx Aezcutcskvoa Type ID: 649 Type: Impact wrench If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ITJ371074, overall weight: 431 kg, total length: 195 mm, total width: 65 mm, total height: 170 mm, space requirement length: 195 mm, space requirement width: 65 mm, space requirement height: 170 mm, operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Schneider Screw Compressor 4152009631 - Durable, V-belt driven compressor units - Motor and compressor protection against overheating - With integrated refrigerant dryer / ready-to-use system - Compact dimensions - Low noise due to sound-insulated housing - Integrated direction of rotation control The machine was purchased as a spare unit in 2020 and is new and has not been used. The machine was never used in production and was only stored. The machine is being sold as part of the liquidation of our carpentry business. Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our premises in Stemwede. Dwjdpfxjziukys Akvja

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar (also available as a 7.5 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure vessel refrigerant dryer fine filter Dwjdpezpxx Iofx Akvja New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,500 h, functionality: fully functional, overall weight: 898 kg, power: 75 kW (101.97 HP), volume flow: 476 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Well-maintained, fully functional screw compressor, 75 kW, with frequency control. Dsdpezrihrofx Akvowa

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AII362754, power: 37 kW (50.31 HP), operating pressure: 7 bar, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA37 oil-lubricated compressor is a powerful and reliable machine designed to deliver optimal performance in various industrial environments. This used model, with a power rating of 37 kW, can operate at a pressure of 7.5 bar, making it ideal for applications requiring constant pressure and energy efficiency. Dwodpfx Akjzpxnvevja Manufactured by Atlas Copco, a leader in the compressed air solutions industry, the GA37 is known for its durability and robust design. Thanks to its advanced technology, it ensures quiet operation while guaranteeing the production of high-quality compressed air. Perfect for companies looking to improve their productivity while minimizing operating costs, this compressor is a wise choice for various industrial sectors. Overall, the Atlas Copco GA37 compressor combines performance and reliability, while also offering excellent value for money for a used unit. It is a smart choice for those seeking a proven and efficient solution in the field of oil-lubricated compressors.

Condition: excellent (used), Year of construction: 2012, operating hours: 36,734 h, Atlas Copco GA55FF screw compressor Dsdpszphrwsfx Akvewa Integrated dryer 55 kW 9.80 bar 8.87 m3/min Year of manufacture: 2012 Operating hours: 36,734

Condition: used, Year of construction: 2017, power: 55 kW (74.78 HP), pressure (max.): 8.5 bar, ambient temperature (min.): -10 °C, ambient temperature (max.): 45 °C, We offer this used Kaeser CSD 105 screw compressor, manufactured in 2017. Compressor type: CSD 105 Djdezrgmxjpfx Akvswa Material number: CSD.4C Serial number: 1328 Year of manufacture: 2017 Rated power: 55.0 kW Motor speed: 2975 rpm Maximum working pressure: 8.5 bar Ambient temperature range: -10°C to 45°C Option: K1 C3 11,000 operating hours If you have any further questions or require more information, please send us a message or call us. We also have used BS51 and BS61 compressors, a TD61 dryer, and a 2000L pressure vessel in stock. Prices are negotiable. You can also purchase a complete set of machines at a favorable price. The machines are used and do not come with a warranty.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3 h, machine/vehicle number: SX8T_8, pressure (max.): 8 bar, Exhibit: Compressor Kaeser SX 8 T (8 bar) with integrated dryer with SIGMA CONTROL 2 Year of construction: 2024 Operating hours: 3 Bh Techn.Daten: Volume flow at 8 bar: 0.80 m³ / min Motor power: 5.5 kW pressure dew point: +3°C Electrical connection: 400 V / 3/50 Hz Dwjdevntmuopfx Akvoa Dimension W x D x H: 590 x 915 x 970 mm Weight: 200 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V with autobalancer with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Dwsdpfjvptx Tox Akvoa Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: as good as new (ex-display), Year of construction: 2024, new compressed air tank 1500 litres standing, galvanized 11 bar (with fittings) incl. container papers Year of construction: 2024 High-quality VIG compressed air tank in galvanized design. Specifications: -Volume: 1500 liters -Ab. Operating pressure: 11 bar -Medium: Air -Diameter: 900 mm -Container height: 2381 mm Dodpsvzw Ipofx Akvowa -Weight: 379 kg -Connection compressed air inlet: 2 x G 2" -Connection compressed air outlet: 2 x G 2" -Connection safety valve: 2 x G 1/2" -Connection condensate drain: G 1 1/2" -Maintenance opening: 2 x hand hole 100x150 mm Manufacture and testing according to EC Directives 2009/105/EC & AD 2000 Design temperature: -10 °C to + 50°C Surface coating: galvanized Visit our shop. We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2025, new compressed air tank 1000 litres standing, galvanized 11 bar (with fittings) incl. container papers Year of construction: 2025 High-quality VIG compressed air tank in galvanized design. Specifications: -Volume: 1000 liters -Ab. Operating pressure: 11 bar -Medium: Air -Diameter: 800 mm -Container height: 2348 mm -Weight: 200 kg -Connection compressed air inlet: 2 x G 2" -Connection compressed air outlet: 2 x G 2" -Connection safety valve: G 1/2" -Connection condensate drain: G 1 1/2" -Maintenance opening: 1 x hand hole 100x150 mm Manufacture and testing according to EC Directives 2009/105/EC & AD 2000 Design temperature: -10 °C to + 50°C Djdpfev Ak Tnsx Akvswa Surface coating: galvanized Visit our shop. We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, machine/vehicle number: 101957.01, Exhibit available immediately: New Kaeser SK 25 - 8 bar screw compressor Controller SIGMA CONTROL 2 Pressure: 8 bar Nominal power: 15 kW Delivery rate: 2.52 m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Weight: 320 kg Operating hours: 2.0 Dsdpfx Akov Ammkjvewa Visit our store. We always have a large selection of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New 7,5 kW variable screwcompressor FirstAir FAS SC 7 Type: FAS SC 7 Year of construction: 2024 technical spezifications: operating pressures of the system: 10 bar(ue) Dwjdov Dkplepfx Akvsa at 10 bar : min.: 530 l/min max.: 1050 l/min Installed power: 7,5 kW speed drive motor: 2930 1/min SProtection class / Insulation class Drive motor: IP55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 68 +/- 3 Compressed air connection:G 3/4" Length : 880 mm Width : 880 mm Height : 1075 mm Weight : 300 kg Visit our store !

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request. Dodpfxov Im Ncs Akvewa

Condition: as good as new (ex-display), Year of construction: 2025, direct-drive Screw compressor ALMIG GEAR XP 22 - 10 bar (air cooled) Year 2025 Time of delivery: 3 weeks Technical specifications Type: GEAR XP 22 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 3.20 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 22 kW Dwsdpfx Aksd Dpvfjvsa Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 73 dB (A) Length: 1250 mm Width: 880 mm Height: 1515 mm Weight: 670 kg Compressed air connection: G 3/4 "

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MA0138_MAXXI4,0D_270st, Demonstration machine: new piston compressor available immediately (Plug and Play): AIRKO MAXXI 4.0 D - 270 ST - 10 bar with standing 270 liter compressed air tank The compressor has 1 operating hour and is available immediately. 2 cylinders Pressure: 10 bar Rated power: 4.0 kW Delivery quantity at 7 bar: 495 l / min Sound level: 78 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 155 x 59 x 113 cm Weight: 134 kg Dedpfx Aod Hy T Askvjwa Convenient leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.