Used sealing machines for sale (93)

Condition: used, Year of construction: 2009, functionality: fully functional, total height: 1,850 mm, total width: 2,500 mm, total length: 1,000 mm, input voltage: 400 V, compressed air connection: 4 bar, Emerito 0.8 lid spout / capper for RTS/ TO82 (glass) jars. 1 speed, 24/bpm. - Multiple sizes of parts available for high and low lids. - Machine can be seen working. - Machine is made to vacuum seal, we have not used this option. - Machine can also close RTS/ TO66. We do not use this option either, changing between two sizes is a lot of work. Sale: "as is, where is" However, telephone assistance is possible up to 2 months after sale. Lsdpfx Abeub Sk Hj Aeah

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Laedsx R Dh Hepfx Ab Aoh Documentation available

Condition: ready for operation (used), Year of construction: 2010, A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Lsdeuxu Ifepfx Ab Asah

Condition: ready for operation (used), Year of construction: 2021, Nordson Hot Melt Glue Pump Type: MESA 6 Year 2021 Power 200/240 V Lajdpey R Ecrjfx Ab Aeh 50/60 Hz, 15/18 A Dimensions: 750 mm x 350 mm x 570 mm.

Condition: used, Year of construction: 2020, Manufacturer : Hagmann Tec AG Model: MEDIMAT 711-45 Year : 2020 Type : Heat sealer / Sealing machine Laedex R Dfrjpfx Ab Aoh Maximum power : 8 kW Pressure : 6,0 - 8,0 bar Format : interchangeable sealing plate Sealing surface 550x350mm Sealing temperature up to 250°C Sealing force 10-70 kN Sealing time up to 9.9 seconds Documentation available

Condition: good (used), Machines are in good working condition. There are 4 tray sealer machine. Ledozqugqopfx Ab Aoah

Condition: excellent (used), ANGELUS 40P Automatic Can Seamer with 21-Piston FMC Filling Unit – Stainless Steel Automatic can filling and seaming unit consisting of an FMC filling unit with 21 pistons and an ANGELUS 40P seamer, designed to continuously perform the operations of product dispensing and hermetic sealing of cans in industrial canning lines. The filling unit incorporates 21 pistons, providing repetitive volumetric dispensing before transferring the cans to the ANGELUS 40P seamer, where the sealing is performed by double seaming between the body of the container and the lid. The combination of FMC and ANGELUS technologies provides an industrial solution especially suitable for production lines that require continuity, consistent filling, and reliable container sealing. MAIN FEATURES -Seamer: ANGELUS -Model: 40P -Filling unit: FMC -Number of filling pistons: 21 -Type: Volumetric filler + automatic can seamer -Automatic and continuous operation -Dispensing by pistons -Volumetric filling system -Automatic can feeding -Synchronized transfer between filler and seamer -Lid feeding and positioning -Automatic sealing by double seaming -Construction mainly in stainless steel -Protective enclosures -Access for inspection, cleaning, and maintenance -Robust industrial structure -Integrable into complete canning lines PROCESS The cans are automatically fed into the FMC filling unit with 21 pistons, where they are positioned and receive a controlled amount of product via the volumetric dispensing system. Once the filling is complete, the containers are automatically transferred to the ANGELUS 40P seamer. The lid is positioned on each can, and the seamer performs the necessary operations to form the hermetic double seam, leaving the container ready for subsequent processing and conditioning stages. It can be integrated with: -Can depalletizers -Container washing/rinsing machines -Product feeding systems -Liquid topping dispensers -Vacuum equipment -Filled can washers -Autoclaves/retorts -Pasteurizers -Cooling systems -Labeling machines -Cartoning and palletizing machines APPLICATIONS Especially suitable for canning industries and canned food manufacturers who need to automate the filling and seaming operations together. The 21-piston FMC system can work with different food products, depending on their viscosity, particle size, container format, and installed configuration. It may be suitable for various vegetable preserves, prepared foods, sauces, and other foods compatible with volumetric dispensing in cans. The combination of the 21-piston FMC filler and the ANGELUS 40P seamer constitutes a robust solution for industrial can filling and seaming lines. Machine available for inspection. Ledpfx Aswn Dl Heb Ajah Additional technical information, can formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), Year of construction: 2011, A tray sealing machine for the food industry is offered. Tray formats: Format A X/Y/Z: 267mm/326.5mm/65mm, Format B X/Y/Z: 227mm/178mm/35mm, Format C X/Y/Z: 106mm/145mm/36mm, VG function, Busch R5 vacuum pump. Inspection by appointment possible. Laedpfey A Sl Djx Ab Aeh

Condition: excellent (used), Year of construction: 1997, Pago-label dispenser double unwind product length min. 50mm width max. 320mm Ledpfxoh Eh Nws Ab Aoah BB version - film feed from below for packaging sticky or difficult to feed products

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Lsdpfx Abjzca Uxo Aeah

Condition: excellent (used), Twist-Off Automatic Capping Machine EMERITO 2.8 – Jar Sealer The EMERITO 2.8 automatic Twist-Off capping machine is designed for the automatic placement and sealing of Twist-Off metal caps onto glass jars in industrial food packaging lines. Manufactured by EMERITO, the machine automates the process of feeding, positioning, and sealing the caps, providing a uniform and continuous seal for the containers before subsequent processing, labeling, or packaging stages. Its construction, primarily in stainless steel, integrated conveyor, and automatic sealing system make it particularly suitable for canning and professional jar packaging lines. MAIN FEATURES -Manufacturer: EMERITO -Model: 2.8 -Type: Automatic Twist-Off capping/sealing machine -Application: jars and glass containers -Sealing with Twist-Off metal caps -Automatic container feeding -Automatic cap positioning and sealing -Integrated container conveyor -Continuous industrial operation -Motorized sealing system -Construction primarily in stainless steel -Integrated control panel -Adjustments for adaptation to the installed format -Hygienic design for the food industry -Integrable into automatic filling and packaging lines APPLICATION The EMERITO 2.8 is designed to automate the sealing of jars using Twist-Off caps. The pre-filled containers are transported to the sealing area, where the cap is positioned on the jar and subsequently adjusted using the capping system. Once sealed, the containers automatically continue to the next stage of production. It can be integrated with: Filling and dispensing machines Cap feeders Jar conveyors Inspection systems Container washers and dryers Lasdpfxszw Hngo Ab Ash Pasteurizers Autoclaves Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Especially suitable for canning industries, manufacturers of sauces, jams, pickles, vegetables, prepared dishes, and other foods packaged in glass jars. The EMERITO 2.8 provides an automatic solution for lines that require continuous, uniform, and reliable Twist-Off sealing, and can be integrated into both existing facilities and complete packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2000, Single-head capping machine Zalkin TM125 La cadence maximale de cet équipement est d’environ 3000 flacons / heure L’introduction des bouteilles se fait par accumulation. Sens gauche -> droite Current format: Plastic capsule: diameter 60.5 mm x 4.5 mm Aluminium capsule: diameter 62 mm x 4.5 mm Possibility of changing the capping head. Roue 16 alvéole : diamètre primitif 530 mm / diamètre alvéole 56 mm Ledjx Rz Htjpfx Ab Aoah - Distributeur de capsule (Bol vibrant + goulotte de distribution prise à la volée) type ADV N°6430 et 6428. - Table tournante : alimentation flacons Inlet belt: 2000 mm / width 110 mm Inlet belt on the machine: 1500 mm Outlet belt: 500 mm Crimping head 104 Tension : 380 Volts 50 hz coffret électrique coté sorti. 1 cellule de contrôle présence flacon capsule plastique 1 cellule de contrôle présence flacon capsule aluminium. 1 cellule détection d'accumulation 1 cellule détection de bourrage

Condition: used, Year of construction: 2014, Ulma packaging line Lajdpfexnkg Ijx Ab Aeh

Condition: excellent (used), FMC 652 Automatic Can Seamer – Stainless Steel The FMC 652 automatic can seamer is designed for continuous, hermetic sealing of metal containers using a double seaming process in industrial production and canning lines. The equipment receives pre-filled cans, positions the lid onto each container, and mechanically performs the closing operations necessary to securely join the can body with the lid. Its automatic configuration allows it to be directly integrated with fillers, depositors, and other equipment in a canning line. MAIN FEATURES -Manufacturer: FMC -Model: 652 -Type: Automatic can seamer -Application: Metal containers -Automatic and continuous operation -Mechanical double seaming system -Continuous can feed -Lid feeding and positioning system -Synchronization between container input, lid, and closing operation -Motorized industrial drive -Adjustment according to installed format -Integrated control panel -Construction primarily in stainless steel -Protective casings in mechanical areas -Compact and robust structure -Designed for continuous industrial operation -Integrable into automatic canning lines PROCESS Pre-filled cans arrive automatically at the FMC 652, where they are separated and positioned for sealing. The corresponding lid is fed and placed onto the container body. Subsequently, the closing mechanism performs the successive operations necessary to form the double seam, creating a hermetic seal between the lid and the can. Once sealed, the containers are automatically discharged and can continue to: Can washers Laodpfx Abewn Dmdo Ajh Seam inspection systems Weight checkers Autoclaves/retorts Pasteurizers Coolers Labeling machines Case packers Palletizers APPLICATIONS Especially suitable for canning industries processing fish, meat, vegetables, legumes, prepared meals, and other canned foods. The compatible can diameters, heights, and formats will depend on the tooling and adjustments currently installed in the seamer. The FMC 652 is a compact industrial solution for automating one of the critical operations in a canning line: achieving a uniform and hermetic mechanical seal of the metal container. Machine available for inspection. Additional technical information, can formats, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 1996, Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps. Additional title: aluminum screw caps Capacity approx.: 20000 bottles/h Length: 1,9 m Width: 1,25 m Height: 2.2 m Ledpsyzh Ixefx Ab Ajah Features: 8 capping heads

Condition: ready for operation (used), Year of construction: 2006, A semi-automatic tray sealer Multivac is available. Cycle performance: 3-12 tray cycles/min, max. tray dimensions X/Y: 380mm/300mm, max. tray height: 110mm, max. film width: 450mm, max. film diameter: 250mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1650mm, weight: approx. 300kg. An on-site inspection is possible. Lasdjxapg Rspfx Ab Aoh

Condition: ready for operation (used), Tray dimensions X/Y 1: 250mm/180mm, tray dimensions X/Y 2: 357mm/265mm, max. film width: 400mm, packaging output: approx. 6–8 cycles/min. Machine dimensions X/Y/Z: approx. 5000mm/900mm/2000mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Lodpfx Abextfgao Aeah

Year of construction: 2011, condition: like new (used), Ross Industries A10 Tray sealer Serial: 406 Ljdpfx Aolnp Agjb Aeah 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Condition: ready for operation (used), GehoTM 800 D Film Sealing Machine / Foil Sealer Foot Pedal Operation Seam Length: 820 mm Seam Width: 3 mm With integrated cutting device You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided that a valid VAT ID number is available. Subject to prior sale. Visit our shop and browse our additional offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Lsdpsxfh D Ejfx Ab Asah Technical specifications and item descriptions may be subject to errors or deviations. We reserve the right to make changes.

Condition: like new (used), Soco Case / Carton Sealer & Packing Station (Like New) Model T10 Lodpfxjrza Nco Ab Aeah With infeed and outfeed gravity conveyors Top and bottom tape heads Top box flap closer facility Adjustable box side guides Box holder on infeed conveyor for packing station use All mobile on castors In excellent working condition, Like new

Condition: good (used), Year of construction: 2005, Film wrapping machine; Machine number: H05 - H0N40008; Year of manufacture: 2005; Pack length: 100-250mm; Pack width: 100-250mm; Pack height: 20-160mm; Output max. 80 packs/min; Packaging material: Polyethylene (PE), polypropylene (PP), oriented polypropylene (OPP), other heat-sealable materials; Product infeed: Manual or automatic via upstream folding machine (Also for sale, Servotec servo-flex 800A) High-performance film wrapping machine for packaging cosmetic tissues, handkerchiefs and napkins in all standard product dimensions. It impresses with its simple and clear design. Laedet H Iwbspfx Ab Aoh All NW-6 models are characterized by fast format changeovers, simple operation, high stability and excellent packaging quality.

Condition: used, Year of construction: 2001, Uncorker Manufacturer: Rink Model: KM 670/2K Year of manufacture: 2001 Additional title: cycled uncorker Capacity: 30000 Bottles/h Power: 6,5 kW Current: 10 A Voltage: 230/400 V Frequency: 50 Hz Length: 2800 mm Width: 1000 mm Height: 2300 mm Formats: 0.33 l bottles, 0.35 l bottles, 0.5 l bottles, module box Running direction: from left to right Operation / Control: Simatic S5 Position: free standing Base construction: Square frame construction painted on dome feet Features: Crate transport, format sets/corker heads for 2x20 bottles and 2x24 bottles, housing with doors, protective grille, control cabinet with operating front, various spare parts Layer patterns: 2x20 bottles, 2x24 bottles Lodpfx Abew Ta D Uj Ajah

Condition: excellent (used), NORDSON PROBLUE 7 HOTMELT GLUE UNIT IN EXCELLENT CONDITION Lsdpfsrtnv Djx Ab Aoah

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 serial number: 10172/4184 year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm Laodpfxeyxgxws Ab Aeh

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Gas injection and closure machine for nitrogen gas flushing of round cans for powder and coffee. Technical specifications as per original manufacturer: - Diameter range: 56 mm – 86 mm - Height range: 45 mm – 200 mm Laodpfjw I Ax Rex Ab Aoh - Production capacity: up to 50 cans per minute - Number of fumigation heads: 10 - Number of seaming heads: 1