Chipboard Floor covering Storage platform Panel

4.000 m², 3.200 mm x 1.000 mm x 38 mm Ausführung: P6

Condition: used, SECOND-HAND BAND SAW CENTAURO MOD. 800 Ffedjr Ilxcepfx Afnet

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: cream white total width: approx. 2.200 mm total height: approx. 1.200 mm mesh size: approx. 60 x 50 mm Frame profile dim. (width): approx. 20 x 20 mm Frame profile dim. (height): approx. 15 x 15 mm wire thickness: approx. 3,00 mm weight/pc.: approx. 8,14 kg Internal designation: RW-2 Ffedpfxsm E I Nvs Afnst

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Ffjdpfjibh S Hjx Afnet Equipped with a ladder.

Condition: new, axle configuration: 2 axles, loading space length: 4,250 mm, loading space width: 2,150 mm, loading space height: 600 mm, loading space volume: 5 m³, color: red, Carrying capacity: 12.000 kg Ffsdpfxoxmu Nws Afnet

Condition: used, mileage: 11,250 km, power: 85 kW (115.57 HP), first registration: 10/2022, fuel type: diesel, next inspection (TÜV): 10/2022, color: orange, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Vehicle without model lettering, metallic paint, metallic paint Sunset Orange Other equipment: Ffodpfx Afjv A Nhqonst Passenger side airbag can be switched off, driver/passenger side airbag, trailer stabilization program (ASL), equipment package: Connected, equipment package: ConnectedDrive Services, electrically adjustable and heated exterior mirrors, BMW Live Cockpit, BMW Live Cockpit Professional, on-board computer, DAB tuner (digital radio reception), Dynamic Stability Control (DSC) with extended scope, Dynamic Traction Control (DTC), electronic. Limited-slip differential, driving assistance system: Active Guard Plus (lane keeping assistant, front collision warning), driving assistance system: attention assistant, driving assistance system: driving experience switch, driving assistance system: Performance Control, electric windows front + rear, Bluetooth hands-free system with USB / audio interface, velour floor mats, 7-speed dual-clutch transmission with Steptronic, urea tank (SCR): 20.5 litres, interior: interior trim in matt grained quartz silver, Isofix mounts for child seat on rear seat, body: 5-door, head airbag system at the rear, head airbag system at the front, steering column (steering wheel) mechan. adjustable, headlight range control, engine 1.5 ltr. - 85 kW 12V turbo diesel, electric parking brake, personalization system (Personal Profile), tire pressure monitoring system, split/folding rear seat backrest, low emissions according to Euro 6d emission standard, heated windshield washer nozzles, front side airbag, service system: ConnectedDrive Services, service system: Intelligent emergency call incl. TeleServices, seat cover / upholstery: fabric grid, start-stop button, start/stop system (function), warning triangle, tinted heat-insulating glazing

Condition: new, Year of construction: 2025, machine/vehicle number: 145568556, Gasparin jaw crusher GI129C Everest mobile jaw crusher on crawler track 55 ton machine with extremely robust crusher and exceedingly high potential. It is characterized by the robust construction in all its parts and is certainly the best answer to the most heaviest applications. Equipped with Grizzly vibratory feeder (GI129C), it is suitable for more traditional applications, with Vibratory feeder and pre-screen, on the other hand, the machine (GI129CV) is suitable for arduous operations with high fines content and high material moisture. Equipped as standard with the patented HCS system (Hydraulic Crushing System), EVEREST is the best answer to quarry requirements. Production capacity: approx. 400 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. gap hydraulically adjustable even during crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Jaw crusher 1150 x 850 mm Ffjdpfx Afohd Na Hjnjt crushing gap from 75 to 200 mm feed hopper 7 m³ - 2850 x 4960 mm Grizzly feeder 1120 x 4250 mm Main conveyor belt 1100 x 10000 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel chain drive 500 x 3900 mm Weight: kg transport length 12950 mm Transport width:3000 mm Transport height 3400 mm More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training Ffodpfsmn Rcqjx Afnot – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: new, Year of construction: 2025, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workfl Ffsdpfjhq A Txsx Afnjt Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility TFON – Surface perfection, every time.

Condition: like new (used), Year of construction: 2024, container length: 40 ft, color: other, overall weight: 30,880 kg, empty load weight: 3,920 kg, loading space volume: 76 m³, loading space width: 2,330 mm, loading space length: 12,015 mm, loading space height: 2,690 mm, 40`HC (High Cube) sea container ONE WAY - used once with cargo by sea freight FOT Depot Hamburg Delivery for an additional charge with valid CSC sticker (for 5 years) "cargo worthy" condition Wind and waterproof Customs cleared for free circulation Net price = 2,950 EUR / in color RAL5010 gentian blue Other colors: RAL7016 anthracite gray = 2,950 EUR net RAL7035 light gray = 3,100 EUR net Also available from FOT Depot Nuremberg / Munich = 3,100 EUR net ITEM DESCRIPTION: - Steel frame construction as a load-bearing element consisting of: 4x corner posts, thickness 6mm and - Roof / floor supports 3 to 4 mm thick - Walls made of corrugated sheet steel 2mm thick - Double-leaf door with all-round rubber seal - 4x galvanized door latches - 4x ventilation openings on the side walls under the roof frame - Floor made of coated wooden panels 28 mm thick, water-resistant - Built according to ISO standards CONTAINER dimensions: - External dimensions (LxWxH): 12,192 x 2,438 x 2,895 mm - Internal dimensions (LxWxH): 12,015 x 2,330 x 2,690 mm - Door opening (WxH): 2,330 x 2,580 mm - Volume: 76 m³ - Dead weight: 3,920 kg - Load capacity: 26,560 kg CONTAINER APPLICATIONS: - additional storage capacity - Material and tool storage - Intermediate moving storage - Transport containers - Workshop - Technical rooms - and and much more\ ADDITIONAL MODIFICATIONS: (excerpt from frequently ordered conversions) - Electrical package / lighting = 850 EUR - Repainting = 1,550 EUR - Installation of passenger door = 950 EUR - Installation of window (1mx1m) = 675 EUR - Shortening container (e.g. to 30ft) = 1,250 EUR OUR SERVICES: Ffjdjgp Aldepfx Afnjt - Container sales: all sizes and types / new and used - Europe-wide delivery by truck / side loader / rail / inland waterway vessel - Container repair - Container conversion - Container accessories and spare parts The containers are located in the empty depot in the port of Hamburg. We have all types of containers. We would be happy to provide you with a personal offer for containers including delivery and possible unloading, free of charge and without obligation. We would be pleased to hear from you. We are happy to answer any questions you may have.

Condition: new, Capacity, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radius difference ----- 50/230 Bending speed/repeatability ----- 230º/s. ±0.05 Length of mandrel ----- 1 000-∞ Ffedpfega T E Asx Afnet Weight ----- 5000kg Machine dimensions ----- 3.0 x 1.6 x 1.5 Tube rotation ----- 0-360°/sec Length feeding ----- 0-1800 mm/sec Degree of tolerance ----- 0,05°/mm Standard components conform to VDMA, ISO and DIN standards OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension