Drive battery

*Sonstige 48V Batterie 775AH NEU Bj.2026

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR55 Ricardo Motor Newpower Generator Generator set Maximum power: 40kW / 50 kVA Engine : Kofo RIcardo N4100ZDS-42, 4 cylinder water-cooled Connection: circuit breaker Psdomgbayopfx Af Sjrb Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2280x1030x1260 mm Weight: approx. 1020kg Diesel tank: 118 L. At 100% load: 8.5 L/h At 75% load : 6.5 L/h At 50% load : 4.4 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm Pjdedmbrxspfx Af Sjrb centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min Prsdpfx Ajzd Sg Isf Seb tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine approx.LxWxH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: new, Year of construction: 2024, saw blade diameter: 315 mm, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, rotational speed (min.): 17 rpm, rotational speed (max.): 33 rpm, BERG+SCHMID vertical circular saw model VKS 315 Speed: 17+33 rpm Podpfxerrvn Ao Af Sorb - Miter left 60° + right 45° - Clamping vice with double clamping arm (4-fold fixed) for low-burr cuts and quick lateral movement - Saw table with large turntable and particularly stable vice for optimum material clamping - Robust prismatic guide of the saw head (adjustable dovetail guide) - Automatic cooling system - Machine base frame with chip drawer - Metal handle for high clamping force - Counter holder with spring assembly a. Saw blade dimensions: 315x40mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW Pedofgpdlepfx Af Serb weight of the machine ca. 0,38 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 18105876-5772, shaft diameter: 360 mm, roller diameter: 800 mm, overall weight: 46,000 kg, total length: 4,500 mm, total width: 4,850 mm, total height: 3,750 mm, operating speed: 6 mm/s, Certified shafts made of forged NiCrMo alloy steel + Protected with height adjustment system (PHAS) Quick bending roll configuration change system (TIMS Technology) Side guide rollers adjustable in 6 directions with fully hydraulic controls Steplessly adjustable rotation speed and simultaneous shaft movements Operating switches on a centrally movable control panel Prjdpfx Aswayt Ref Sob

Condition: ready for operation (used), Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting range at 90° rectangular: 90 x 90 mm Predpfx Afjl Ra Uio Ssb Cutting range in mitre at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 upm Drive motor: 380 V, approx. 1.3 kW Required space: 850 x 600 x 1600 mm

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm Prjdpfx Ajy Ty Ihsf Seb max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: new, Year of construction: 2021, functionality: fully functional, turning diameter over cross slide: 1,000 mm, spindle bore: 110 mm, turning diameter: 1,300 mm, center height in crank: 710 mm, center width: 890 mm, turning length: 6,000 mm, total length: 11,920 mm, total width: 3,600 mm, total height: 2,760 mm, spindle speed (max.): 1,000 rpm, CNC LATHE GURUTZPE GL 13 (BRAND NEW) TECHNICAL SPECIFICATIONS Pedpfxszqfi Nj Af Ssrb CNC lathe GURUTZPE Model GL13.10.6 CNC FAGOR 8065 Distance between centers: 710 mm Maximum turning diameter over carriage: 1000 mm Maximum turning diameter over bed: 1300 mm Distance between centers: 6000 mm Maximum load between centers without steady rest: 10 tons Automatic turret, 4 positions – Baruffaldi 265 Manual chuck: 800 mm X-axis travel: 675 mm Z-axis travel: 6000 mm Bar capacity: 110 mm Spindle speed: 0-250 / 0-1000 rpm Main motor power: 28 / 34 Kw Rapid traverse: X-Y-Z: 8000 mm/min Footprint dimensions: 11920 x 3600 x 2760 mm Approximate total weight: 17,000 kgs PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST.

Condition: excellent (used), Power source 250 Amp (60% duty cycle) WELDKAR WK MIG 250 DUAL PULS, suitable for industrial use. In continuous use, the maximum welding current is 195 A. The MIG 250 Dual Pulse welding machine is versatile and is suitable for MIG / MAG, TIG (lifting arc) and MMA (electrode) welding. Equipped with various synergic welding programs for steel, stainless steel, aluminum and CuSi3. In addition, this welder is equipped with the Pulse and double pulse function. Up to 100 welding programs can be saved and recalled. Parameters can also be manually adjusted by the welder if required. The power source is equipped with a digital control panel where various parameters can be easily set and read. Including gas flow, soft start, combustion, downward slope, gas flow and pulse rate control. The latter is necessary for thin-walled welding. The 2 - 4 stroke setting provides extra convenience when welding longer parts. Partly due to the 4-roller wire feed system, a long and trouble-free wire feed is guaranteed. With the MMA function, coated electrodes can be welded. To further optimize the weld, hot start arc force parameters can be set. The welder is portable and available in a mobile frame. Furthermore, they are CE and EMC certified and suitable for use with generators with a minimum power of 12.5 kVA. WELDING MACHINES ARE COMPLETELY NEW, POST-EXHIBITION. Prsdpfxsd Nzlxj Af Seb