Grill-type bag machine

Wuxi Hongchang Precision Machinery Co. L GSN-400BL

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m Bsdpfx Aev Dvfrja Esld The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Bsdpfxowu Spto Aa Esld Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible. Bledpfevtqrfox Aa Esd

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Bljdpfx Aodnxydsa Eed Reduced saw blade should be used with not more than 350 mm main shield.

Condition: used, Year of construction: 2006, Configuration: • Unwinder • Teknek web cleaner • Corona treatment • 6 flexo print stations • 6 × IST UV dryers • Cold foil module • Cold foil unwind/rewind • Lamination module • Laminate unwinder • Die-cutting section with 3 stations Bedpoxzq T Ujfx Aa Ejld • EL camera system • Rewinder Tooling included: • Print cylinders + magnetic cylinder + varnish roller: o Sizes: Z87, Z96, Z110, Z132, Z140 o 5 print cylinders of each size o 1 varnish cylinder for print station 6 • 16 anilox rollers Additional information: • End of 2024: full revision of the printing units and related tools completed.

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Blodsfp A I Espfx Aa Esd Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Bjdexuwanopfx Aa Eeld Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: new, Year of construction: 2026, The Mobile Fruit Processing Line is designed to conveniently accommodate all the machines necessary for juice production and a smooth work process. It contains: -Fruit and vegetable washer elevator mill MAXIMILL 3000 -Belt press POWERPRESS 1500 -Transporter for leftover mash -Stainless steel tanks -Diesel pasteurizer -Semi-automatic Bag in Box filler -Juice filters -Sink with a stainless steel table Capacity: 1500 kg/h. Other available capacities: 400 kg/h, 800 kg/h, 1200 kg/h. Features: -The mobile juice line conveniently contains all the machines required for fruit processing & juice production. -Requires only 1 person to operate the whole line. -Mobility is the biggest advantage which eliminates costs for premises and provides the ability to change location. -The juice yield from apples is ~75 % . -All machines are interconnected and controlled automatically. -The mobile juice production unit includes a Bag in Box filler which fills the juice into both Bag in Box and Stand up Pouch packages. -The mobile juice line can be customized on client’s request. -The line is easy to operate and maintain. -The mobile fruit processing line is installed in a specially made trailer which can be easily opened for work and shut when needed. -The biggest advantage of our Mobile Fruit Processing Line is the ability to produce juice anywhere you like. This way the client avoids additional expenses for premises and gets the ability to change work location. Bsdpfxeq Nl Afo Aa Esld Mobility is the key aspect here which provides the client with more possibilities, such as developing a juice pressing service business at various apple farms or different towns.

Condition: new, Year of construction: 2025, Cardboard Core winder maschine for Toilet Tissue paper rolls Specifications Blodeit N Rvopfx Aa Esd • Carton web width 60 - 76 mm • Production speed 35 - 40 m / min • Core i. diameter 40 mm - 80mm • No. of plies 2 , 3, 4 plies. (more optional) • Cut off length 600-2900 mm Features • Operation with either hot or cold glue. • Exchangeable mandrels. (for different core size) • Crush cutting by two or three circular cutters with synchronized movement. • Variable speed – electronic. (three phase)

Condition: good (used), Traypacker / wrap arround packer Bedpofxypiefx Aa Eeld Trays and wrap-around boxes minimum packaging size L x W x H = 190 x 140 x 80 mm maximum packaging size L x W x H = 460 x 350 x 250 mm 4 lane machine Hotmelt machine was rebuild in 2018 siemens s7 plc controlled easy format change as-is or adjusted to customer needs