Generators

WMT SL 3000

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Ppsdpfjg A D Anjx Amyjw Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Ppedpfx Amsi Dfidsysw Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 Podpfot Akcfex Amyopw 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Condition: used, mileage: 248,000 km, power: 115 kW (156.36 HP), first registration: 10/2009, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, emission class: euro5, number of seats: 9, total length: 6,215 mm, total width: 2,205 mm, total height: 3,090 mm, Equipment: ABS, parking heater, soot filter, Engine brake, differential lock, sun visor, roof hatch, high roof, electrically adjustable exterior mirrors, shelving units, twin tires, used vehicle Ppjdpfx Amow E A D Ajyow Vehicle no. 2387, ABS, rear axle differential lock, high roof, wheelbase 3,700 mm, roof hatch, 90L diesel tank, engine brake, EURO 5, auxiliary heater, towing hitch (jaw-type) with air and electrical connections, reversing camera, revolving beacons, 9-seater (1+4+4), shelving installation in cargo area, registered as special vehicle construction crew van (SO-KFZ Bautruppwagen), for inquiries please, side doors ('Schwedenklappen'), subject to errors and prior sale.

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Pedpfx Aewf Anhjmyopw Good working condition. Please check out our other listings as well.

Year of construction: 2008, condition: not inspected (used), Emergency power generator Geko 6401 ED-AA/ZEDA, year of manufacture 2008, 2050 operating hours, diesel, 220/400 volts, serial number 100821, engine runs but does not generate electricity. Ppsdegqfxrepfx Amyjw

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Psdpfx Ajyayumemyjpw Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: used, mileage: 41,682 km, power: 115 kW (156.36 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 7,260 kg, maximum load weight: 230 kg, overall weight: 7,490 kg, wheelbase: 3,700 mm, fuel: diesel, color: blue, driver cabin: other, gearing type: other, emission class: euro5, suspension: other, number of seats: 3, total length: 6,215 mm, Year of construction: 2011, construction height: 2,970 mm, Equipment: parking heater, trailer coupling, Body variant: high roof, heated exterior mirrors, wing doors (opening angle 270 degrees), sliding door on the right-hand side of the cargo area, side collision protection, fog lights, rear fog lights, reversing lights, seats in the driver's cab: double passenger seat, anti-lock braking system (ABS), disc brake on the front axle, disc brake on the rear axle, axle load on the front axle 2.5 t, hydraulic steering, battery 74 Ah, 6-speed gearbox, fuel tank: 90 litres, permissible Total weight 7.49 t, Drive type: rear-wheel drive, Body/structure: high-space box, Driver's cab: basic, Suspension: leaf / leaf, Engine 4.3 ltr. - 115 kW Diesel (OM 904 LA), power steering, emission standard EURO 5, wheelbase 3700 mm, trailer coupling: ball head, generator 100 A, trailer socket 13-pin, windscreen tinted, sliding door loading area left, heat-insulating glazing, airbag driver's side Tires: 205/75R17.5 124/122M Goodyear M+S, rotating beacons round speed cameras, auxiliary heating Webasto, reflective warning strips, vehicle interior fittings control room, weather protection aluminum flap foldable up, lifting and lowering device with electric chain hoist, intercom, rear surveillance camera, Water tank approx. 90 liters with pump, control panel coded/ semi-professional, control panel extension for EX protection testing, rear area control, EDP mixer type SG-KST, slip ring cable reel 20 BSR, special camera cable 400m, camera trolley "Turbo 2", rotating and swivel head camera type "RZL-LED", rear area monitor, battery unit 24V/ 675Ah, battery charger, sine voltage converter output 24V/ 1600W, temperature and inclination measurement in the camera trolley Turbo 2, radio Ppodpfxsr Uzn De Amysw accessories, digital tachograph, vehicle TV system JT-elektonik GmbH: MB Vario 816 KA for examinations from DN 200mm - DN 1800/2000mm Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Subject to error and prior sale

Condition: excellent (used), functionality: fully functional, working width: 1,400 mm, plate length: 3,500 mm, stroke length: 450 mm, Automatic Hydraulic Pressing Line with Heated Platens – Excellent Condition We offer a complete industrial pressing line with a fully automatic continuous cycle (loading – pressing – unloading and stacking), ideal for the production of 2- and 3-layer parquet, veneering, engineered flooring, and other wood-based applications. Technical Specifications: Work platen dimensions: 3500 x 1400 mm Heavy-duty drilled solid steel platens Opening stroke: 450 mm Heating system: diathermic oil boiler (capacity: 200 liters) 6 large-diameter pistons – top-down pressing Psdpfjwiw Uqjx Amyjpw Platen height from floor: 800 mm Platen closing time: 1–2 seconds Opening/closing cycle time: 2–3 seconds Working pressure: 10 kg/cm² Installed power: 10 kW Automatic loading conveyor Unloading roller conveyors Robust frame made of seamless steel sheets Independent electrical control panel The machine is in excellent working condition. Its heavy-duty construction ensures reliability and durability in demanding industrial environments. Price: negotiable Feel free to contact us for more information, photos, or to schedule a machine inspection

Condition: used, mileage: 248,000 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 10/2009, emission class: euro5, color: red, number of seats: 9, total length: 6,215 mm, total width: 2,205 mm, total height: 3,090 mm, Equipment: ABS, parking heater, soot filter, Engine brake, differential lock, sun visor, roof hatch, high roof, electrically adjustable exterior mirrors, shelving installations, twin tires, used vehicle. Ppedow E A Easpfx Amyjw Vehicle No. 2746, ABS, rear axle differential lock, high roof, wheelbase 3,700 mm, roof hatch, 90L diesel tank, engine brake, EURO 5, auxiliary heater, Maul trailer coupling with air and electrical connections, rearview camera, beacon lights, 9-seater (1+4+4), shelving system in cargo area, registered as SO-KFZ construction crew vehicle. For inquiries please, Swedish flaps. Subject to errors and prior sale.