Scraper chain conveyor

WISSMATEC Kratzkettenförderer

Year of construction: 2003, condition: ready for operation (used), Used drum dryer manufactured by SAFEM, extracted from a line of gluten-free products. Fluid: Steam Design pressure: 12 bar Maximum operating pressure: 9,5 bar Test pressure: 24 bar Maximum operating temperature: 192ºC Volume: 4.55 m3 Pressure x Volume: 54.6 bar x m3 Kdjdpfeq Nmuwsx Ah Njg

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including substructure. Dim: 6000 + 620 x 105mm Conveyor belt width 500mm PVC conveyor belt incl. Studs, sidewall and sealing tape Kdedped Ra Uajfx Ah Njg V2A feeding hopper at the beginning of the conveyor belt. * optional with magnetic deflection roller at the end of the conveyor belt. * optionally available as a climbing conveyor * Special designs in all versions possible.

Condition: good (used), Year of construction: 1990, 4-shaft shredder from the well-known manufacturer Untha, type RS 30. 2 x 7.5 kW. The gearbox was overhauled and new cutter discs were installed on the shredder 3 years ago. Since then, it has hardly been used. Repair costs amounted to €5,300. Kdedpfexpn Hnox Ah Nog

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, Kdedpfxeff Sbie Ah Nog fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Kdedpfoihpn Nox Ah Nsg Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden. Kdjdpfxeikvlis Ah Njg

Condition: excellent (used), Year of construction: 2007, High speed moulder infeed comprising a freestanding flat magazine for use in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 11kW hydraulic unit (max 150m/min). 15kW hydraulic unit (max 200m/min) possible to offer also. Suitable for 300mm wide feed material. A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Kdodpfxeggghme Ah Nog

Condition: new, functionality: fully functional, Year of construction: 2025, color: black, overall weight: 1,600 kg, empty load weight: 1,600 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer BLACK, Office Container | Living Container | Construction Container | Model BLACK | 240cm x 600cm | High-Quality and Flexible Solution Available products can be inspected and picked up directly from our warehouse. Our office and living containers provide an excellent solution for a wide range of applications. They stand out with outstanding quality, maximum flexibility, and short delivery times. Technical Details Dimensions: •⁠ ⁠Width: 240 cm •⁠ ⁠Length: 600 cm •⁠ ⁠Height: 250 cm Insulation •⁠ ⁠Ceiling/Walls: 50mm PUR (Polyurethane) •⁠ ⁠Optional: 100mm insulation available with PUR, PIR, or Rock Wool •⁠ ⁠Floor: 16mm fiber cement board + PVC covering High-quality workmanship ensures long-term durability. Equipment: •⁠ ⁠1x Room •⁠ ⁠1x External Door •⁠ ⁠2x Windows with Shutters •⁠ ⁠2x LED Interior Lights •⁠ ⁠2x Interior Power Outlets Colors: •⁠ ⁠Facade Color: RAL 7016 •⁠ ⁠Frame Color: RAL 7016 •⁠ ⁠Customization: Individual design adjustments possible according to customer preferences Stock & Delivery: •⁠ ⁠In Stock: Shipping on the same day •⁠ ⁠Out of Stock: Production time depending on the model, approximately 2 to 4 weeks •⁠ ⁠Worldwide Shipping: We offer professional shipping services to ensure fast and reliable delivery to any country. Custom Sizes: Products can be manufactured according to the customer’s specific requirements. Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen, Germany Kdodpsvv Nqxsfx Ah Nog For further information or customized solutions, please feel free to contact us!

Condition: new, Year of construction: 2024, MONOBLADE EDGER lenht of cut from 4,2 to 8,2 mt Kodpjfw Nv Rjfx Ah Nsdg max depth of cut 160 mm parallel guide hopper

Condition: ready for operation (used), Tilt destacking for layer separation Stacking lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before feeding unit Ksdpouzht Tsfx Ah Nsdg Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine