Wood shredder

WEIMA WL 8

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design Nkodpfx Ahsmhh Idevju A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Comes to stock 54634 Bitburg

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 12786 040, overall weight: 20,000 kg, rotor diameter: 640 mm, total length: 4,900 mm, total height: 2,600 mm, total width: 4,100 mm, rotor width: 2,000 mm, power: 203 kW (276.00 HP), rotational speed (max.): 340 rpm, input current: 415 A, Equipment: rotational speed infinitely variable, The Vecoplan VAZ 2000 M F-T is a powerful single-shaft shredder. Nkjdpfx Asurkc Rjhvsu This robust shredder offers an efficient and reliable solution for a wide range of applications. Possible applications: - Household waste - plastics - paper With its proven technology and high throughput of 4-5 tons per hour, the VAZ 2000 M F-T is the perfect choice for shredding and volume reduction in disposal and recycling processes. The pictures are examples. The pictures do not show the machine as it is offered, they only serve as an example of what the machine will look like after the overhaul. Price on request.

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 Nkedspdqzxspfx Ahveu height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Nkedpfswnx Uiox Ahvsu Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm 22 kw motor Nedpfx Ast Tvk Ashvsku with discharge auger

Condition: excellent (used), Year of construction: 1986, Opening : 1000 x 800 mm Rotor diameter : 200 mm Number of knives : 18 pc. trapez ( 40 x 40 mm ) Engine size : 15 Kw Nkodpfolkdclsx Ahvju Siewe hole diameter : Ø 20 mm Machine measures : L 2100 x W 1500 x H 1800 mm Est. Weight : 2000 kg.

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Njdpfegmh H Tsx Ahvsku Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, Year of construction: 2018, rotor diameter: 368 mm, rotor width: 1,500 mm, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Motor output 90 kW Throughput capacity approx. 5 tons per hour (depending on material) System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC Built-in screen with 20 mm screen hole diameter Replacement screen with 50 mm screen hole diameter The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Weight approx. 12500 kg Nkodpfxsxwdiuo Ahvju Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. See PDF-file below for more detailed information. Nkodsvt Tptjpfx Ahveu

Condition: used, Year of construction: 2011, operating hours: 4,950 h, functionality: limited functionality, machine/vehicle number: 80, rotational speed (min.): 16 rpm, power: 261 kW (354.86 HP), We purchased the machine new in 2011. Since the end of 2020, we have had a new unit and have barely, if at all, used the VZ 750 D since then. The machine is still operational and can be demonstrated. The combs are new, and the belts are in good condition. The engine (CAT C9) runs and delivers power; it smokes under full load, as there is no exhaust aftertreatment system installed. The Arjes can be inspected by appointment. Please submit your questions in German; we will respond promptly. Sale is exclusively to commercial businesses with headquarters in the EU. Nsdpfxox Tp T To Ahvsku