Wheel loader

Volvo L180F

Condition: good (used), Gabbiani SA 300 multi-saw - Italian production TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm spindle diameter 50 mm sleeve diameter 70 mm 3 upper pressure rollers Hsdpfehcwrkox Ah Njfb minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: used, mileage: 167,000 km, power: 88 kW (119.65 HP), first registration: 12/2018, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,999 mm, total width: 1,956 mm, total height: 1,951 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, soot filter, Special equipment: * Rear parking assistance * Wooden floor in the cargo area * Mobile office package 1 * Full wheel covers * Spare wheel with road tires * Trim in cargo/passenger area Additional equipment: * Driver's airbag * Traction control system (ASR) * Exterior mirrors electrically adjustable and heated * 85 Ah battery * On-board computer * Rev counter * Automatic headlight activation * Rear wing doors without glazing * Cabin filter: pollen filter * Body type: panel van * Fuel tank: 80 liters * Adjustable steering column (steering wheel) * Engine: 1.6 L - 88 kW dCi diesel * Rear fog lamp * Wheelbase: 3098 mm * Low emissions according to Euro 6 standard * Sliding door right side cargo/passenger area * Seat upholstery: fabric, Seats in driver's cabin: driver's seat comfort, 3-way adjustable * Daytime running lights * Lashing rings on the side walls and on floor of cargo area * Pre-installation for body electrics Hsdpfxoww Sgdj Ah Nsfb * Heat-insulating glazing * New tow bar * Note: Increased oil consumption (2 l / 1000 km), vehicle is drivable but needs repair, possibly turbo. Engine smokes slightly during cold start phase, then runs clean. If you are interested in this panel van, please contact Mr. Krey Monday to Friday from 9 am to 6 pm, otherwise please send me an email and I will get back to you promptly. I speak German, English spoken, on parle français. Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, mileage: 511,000 km, power: 367.75 kW (500.00 HP), first registration: 11/2020, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, spoiler, SCANIA 500 S Full-Air Suspension 2+2 - First registration: 11/2020 - Mileage: 511,300 km - Retarder: - Stationary air conditioning - Leather interior - Navigation system - Double fuel tank - Double bunk beds - Tyres: 50% FINANCING OR CUSTOMIZED LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – OFFICIAL DEALER FOR MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 – 377 7064530 OPENING HOURS: MONDAY–FRIDAY: 8:30–19:00 Hfedpswav N Isfx Ah Nsb SATURDAY: 08:30–14:00 WE OFFER A WIDE SELECTION OF MULTI-BRAND USED COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500–V8–650–580–730–S500–S 500–S500 – Stralis – Man – Nissan V8 – Intarder– 770s – Limited Edition – 660 S – Semi-Trailer – Refrigerated Semi-Trailer – Tipper – Lamberet – Schmitz – Isuzu – Fixed Platform – Crane – Tipper – 4 Axle – 4 Rear Axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way Tipper – V8 – Scania – Frost Edition – Curtainsider – Box Body – Tail Lift – Refrigerated Compartment – Insulated with Fridge – Van Domenico Truck Srl declines any liability for discrepancies in technical specifications, options, and features that may differ from those indicated in the description. Please check the actual characteristics of each vehicle.

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. Hfedpeilk H Tjfx Ah Nob - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Hoder A Eifjpfx Ah Nefb

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm Hfsdpfxeuz Hmxj Ah Njb - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: ready for operation (used), Wide Planer Hedswg S Tvopfx Ah Nefb

Condition: used, Technical data: Track width: 400 mm Max cutting height: 150 mm Max saw blade diameter: 450 mm Min element length: 700 mm Smooth feed regulation Automatic lubrication system Antireflection protection Extraction port: 300 mm Safety switch Power supply: 380 V Main engine power: 55 kW Overall dimensions: Length: 2000 mm Width: 2120 mm Height: 1860 mm Hodpfx Aheh Tkbke Nefb

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Hfedpfsxdl U Esx Ah Njb

Condition: good (used), Year of construction: 1985, functionality: fully functional, type of input current: three-phase, Lenght :10400mm/ piece Roller lenght: 1000 mm Roller diameter : 90 mm Space between rollers: 120mm Hedpodbacvjfx Ah Nsfb Weight cca: 1800kg Stock: approx. 70m!! diferent sizes.