Crane truck

Volvo FH 16.750 8x4 HIAB 638 E-8 + JIB 150X-6

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Rcodpfxjt N Ante Acdob Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system. Rjdotp Dhpepfx Acdocb  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: excellent (used), mileage: 493 km, power: 368 kW (500.34 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, operating hours: 1 h, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Power-assisted brakes - Low noise - Speed limiter - LED lights - Alloy wheels - Air horn - Particulate filter - Side skirts - Sun visor - Stability control - Power Take-Off (PTO) = Additional Information = Transmission Gearbox: I-Shift, automatic Axle Configuration Front axle 1: Alloy wheels; Steering Front axle 2: Alloy wheels; Steering Rear axle 1: Twin tires; Alloy wheels Rear axle 2: Twin tires; Alloy wheels Weights Unladen weight: 21,160 kg Functional Mast: Telescopic (8 sections) Mast length: 22 m Lifting capacity: 18,000 kg Lifting height: 2,200 cm Crane: HIAB X-HIPRO 548 E-8, mounted behind the cab Body manufacturer: HIAB X-HIPRO 548 E-8 CE mark: yes Condition Technical condition: very good Visual condition: very good NEW VOLVO FMX 500 8X4 WITH HIAB OPT25S56 ROLL-OFF TIPPER + HIAB X-HIPRO 548 E-8 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 AP AXLES LEAF SUSPENSION WHEELBASE 510 CM NEW FMX MODEL CAB WITH AIR CONDITIONING AUTOMATIC GEARBOX WITH ENGINE BRAKE ALCOA WHEELS HIAB 25 TON ROLL-OFF TIPPER TYPE: OPT25S56 ADJUSTABLE UNDER-RUN PROTECTION HIAB X-HIPRO 548 E-8 CRANE 8X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5TH AND 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 18,000 KG MAX WORKING HEIGHT 2,200 CM MAX LIFTING CAPACITY AT 1,960 CM 1,720 KG 4X OUTRIGGERS NEWLY FITTED UP TO 2023!!! 2 AVAILABLE FROM STOCK FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL Rcsdeuxviqepfx Acdjb WE SPEAK ENGLISH

Condition: excellent (used), mileage: 252,000 km, first registration: 07/2015, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,100 mm, Year of construction: 2015, operating hours: 2,708 h, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Low noise - Speed limiter - Refrigerator - Alloy wheels - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Auxiliary heater - Xenon lighting - Power take-off (PTO) - Central lubrication - Towing jaw = Further Information = Axle configuration: Front axle 1: Alloy wheels; Steering Front axle 2: Alloy wheels; Steering Rear axle 1: Alloy wheels; Suspension: Air suspension Rear axle 2: Alloy wheels; Lift axle; Steering; Suspension: Air suspension Weights: Unladen weight: 19,355 kg Payload: 15,645 kg gross vehicle weight (GVW): 35,000 kg Redpfsutkz Ajx Acdscb Functional: Crane: EFFER 395-8S, year of manufacture 2015, mounted behind the cab Superstructure brand: EFFER 395-8S CE marking: yes Condition: Technical condition: very good Visual condition: very good

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Rcjdpfx Acoxp Rb Isdsb

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine. Rodpfx Aceri Slmsdocb

Condition: good (used), mileage: 109,000 km, power: 405 kW (550.65 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 6,000 mm, Year of construction: 2016, operating hours: 7,962 h, Equipment: trailer coupling, = Additional Options and Accessories = - Aluminium fuel tank - Brake booster - Low noise - Refrigerator - Air suspension - Reversing camera - Sun visor - Xenon lighting - Tow hitch Rcjdpfx Acoy Amzysdob = Further Information = Axle Configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle Weights Unladen weight: 25,715 kg Payload: 13,285 kg Gross vehicle weight: 39,000 kg Functionality Body brand: EFFER 955/8S + JIB 6S CE marking: yes Condition Technical condition: good Visual condition: good Financial Information Price: On request

Condition: excellent (used), mileage: 15,210 km, first registration: 04/2022, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, retarder, soot filter, spoiler, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - High beam - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Particulate filter - Reversing camera - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Towing hitch = Additional Information = Transmission Gearbox: OPTICRUISE GEARBOX, automatic Axle configuration Front axle: steered Rear axle 1: twin tyres Rear axle 2: twin tyres Rear axle 3: lift axle; steered Weights Unladen weight: 23,160 kg Functional Boom: telescopic (11 sections) Boom length: 31.8 m Lifting capacity: 9,270 kg Lifting height: 3,180 cm Crane: HMF 5020-K6 + JIB FJ1000-K5, mounted behind the cab Body brand: HMF 5020-K6 + JIB FJ1000-K5 CE marking: yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request SCANIA R530 V8 NGS 8X4 TRIDEM WITH HYVA 2Z TIPPER + HMF 5020-K6 CRANE + JIB FJ1000-K5 EURO 6 L PACKAGE V8 530 HP DRIVE 8X4 LAST AXLE STEERED AND LIFTABLE 10 TON FRONT AXLE DIFF LOCK WHEELBASE 395 CM AIR SUSPENSION CR20L SLEEPER CAB WITH AIR CONDITIONING, NAVIGATION, REFRIGERATOR, LEATHER, CAMERA AUTOMATIC TRANSMISSION RETARDER TRAILER COUPLING ADJUSTABLE UNDERRUN PROTECTION HYVA 2Z TIPPER WITH FRENCH DOORS DIMENSIONS: 600 CM X 246 CM X 100 CM HOOK EYES HMF 5020-K6 CRANE + JIB FJ1000-K5 TOTAL 11X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 9,270 KG MAX LIFTING CAPACITY AT 2,850 CM 575 KG Rcedpfxjuxv Sxs Acdeb MAX WORKING HEIGHT 3,180 CM CRANE CAN WORK OVER THE CAB. SEE LOAD CHART IN PICTURES 4X OUTRIGGERS VEHICLE IS COMPLETELY BUILT FROM STAINLESS STEEL!!! FIRST REGISTRATION 22-04-2022 WITH ONLY 15,210 KM!!! FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINES FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 251 h, load capacity: 8,000 kg, lifting height: 4,490 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 2,400 mm, empty load weight: 16,850 kg, total length: 2,640 mm, drive type: Elektro, construction width: 2,140 mm, Electric 4-wheel forklift Load center: 900 Mast type: Triplex Condition: As good as new Technical condition: very good Front tires type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Rjdpfx Aexxdy Nscdecb Battery Volt: 80V Battery year of construction: 2020 Sideshift, Fork positioner, 3rd valve, 4th valve, heating, STVZO, full cab, full free lift, CE certificate,

Condition: used, Empty weight: 6.000 kg Dimensions (LxBxH): 340 x 210 x 190 cm Price: On request - Documentation available: No - CE certificate present: No - Max. working width: 860 Rcodpfoxbf Iaex Acdsb - Transport dimensions: 3400mm x 2100mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels