High-bay warehouse pallet racking system

Vogelsang NS/ Regallänge: 13,92 lfm. St.: 6.200 x 1.100 mm/ St.: 2.700 mm

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Balz BG 90 with feed block conveyor Still in use today Min. log diameter: 140 mm Bwodpfx Ajygli Njlbon Max. log diameter: 900 mm Shortest wood length: 2000 mm Feed speed: 10 or 16 m/min Rotor with 5 knives

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Number of spindles 4 Spindles bottom 1 Spindles right 1 Spindles left 1 Spindles top 1 Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Bedpfx Asuygcwolbswn Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Bsdsvbdyxopfx Albswn Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 370, total width: 2,500 mm, total height: 4,000 mm, total length: 7,000 mm, overall weight: 14,000 kg, type of input current: three-phase, space requirement width: 2,500 mm, space requirement length: 7,000 mm, space requirement height: 4,000 mm, input voltage: 380 V, oil tank capacity: 200 l, pressure: 300 bar, operating pressure: 250 bar, power: 37.51 kW (51.00 HP), year of last overhaul: 2023, noise level: 80 dB, Equipment: cooling unit, emergency stop, *For sale: Mobile wood briquetting plant. *Ruf RB440 press > 2 hours/1 ton. *Press completely overhauled with all supporting documentation. *Truck roadworthiness certificate (TÜV) valid until Jan. 2026, ready to drive and permitted for use in environmental zones/Green badge/Tax-exempt!!! Special-purpose vehicle—work machine!! *PE packaging bags for approx. 90 tons included. *Hydraulic pump (Linde) > New. *Discharge gearbox > New. *Intake blower motor > New. *Complete hydraulic oil change, 200L > New. *Many spare parts available due to business closure. *Truck: MAN 14.232 / 335,937 km, year of manufacture: 1990. *Truck with new, reinforced flatbed! Manufacturer: Suhr. *Roadworthiness certificate (TÜV) > New. *Tires (all 6) > New. *Front axle brakes relined. Bsdpswhw Sysfx Albjwn *Sale includes full operation instruction/training. *If interested, please contact by email.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Aligning roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Bodpfey Uzhfex Albown - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, Lift table with a built-in chain conveyor. Load capacity 3 tons. Bwjdpfx Aofhbupslbsn Platform size approx. 3200 x1200mm. Technical description : Single scissor lift table type TT3000Bsp. - 3000Kg load - useful stroke 1600mm - Height 350mm - platform approx. 3200 x1200mm - Hydraulic unit drive with 2.2 KW motor - Switch up / down with manual switch Chain conveyor with 3 conveyor chains installed on the lifting table. - Length about 3200mm - Distance of the outer chains is 1100mm. - Drive gear motor SEW 1.1 KW - Drive is installed under the lifting platform. - Conveyor chains 3 x 1½ "roller chain German quality - conveyor speed approx. 7m / min - Stable cover plates between the conveyor chains, accessible, closed form. - Electrical switching manually via manual button dead man's switch, with function forwards / backwards. - Construction height about 300mm. Base frame substructure with adjustable feet can therefore be driven under with forklift forks. Overall height: approx. 750 mm 1 pc = Lifting table + chain conveyor + floor frame.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Bodpfx Alex Svm Robjwn Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: dd2d22d, ELECTRONIC CONTROL SYSTEM FOR X-RAY CUTTING LINE Wood type: Pine, Spruce Scanner functionality Bwodpsxvxrnofx Albon Acquisition of measurement signals from the multi-sensor scanner. Processing (D) of the 3D map from the laser triangulation signal. Processing (S) of the fiber deviation map from the laser scatter signal. Processing (R) of the roughness map from the laser triangulation signal. Processing (C) of the normalized color map from the high-resolution RGB signal. Integration of 3D data, fiber deviation, roughness profile, and color map information into a coherent multidimensional image.

Condition: used, Year of construction: 1995, machine/vehicle number: 15809, functionality: not functional, Vacuum Dryer / Drying Chamber DWT / IWT MD 2600 x 15000 Used Compact System The machine is still connected to power and heating but has not been in use for the past 6 months. *PLC control renewed in 2014* *Vacuum pump defective* Dryer diameter: 2600 mm Dryer length: 15000 mm Package length: 15000 mm Package width: 1200 mm Package height: 2100 mm Gross capacity: 38 m3 Net capacity: 25 m3 of sawn timber or 18 m3 of log wood Electrical connection: 50 kW Power consumption: 18 kWh Drain: 50 mm Water connection: 25 mm Heat connection: 87 kW, 85 °C hot water at the dryer Heat consumption: 500 kcal per liter moisture or 0.6 kW per liter moisture Including heating boiler operated with heating oil (*approx. 15-20 years out of service*) Hydraulic, fully automatic boiler closure Boiler material: solid stainless steel according to DIN, x5 Cr Ni 189 150 mm insulation, sheathed with 1 mm galvanized steel sheet 1 rail bridge in front of the boiler 5 trolleys for loading and unloading, each approx. 3000 mm long 15 fans with Siemens motors Heating register as stainless steel finned tubes with aluminum fins, approx. 180 m long, surface area 280 m2, diameter 25 mm Supply and return pipes, diameter 80 mm Heating medium: 85 °C hot water at the user Circulation pump capacity: 75 m3/h 3 fans for steam condensation Rails in front of the dryer: 16000 x 600 mm The entire system stands on a concrete foundation and can be lifted and loaded as a single unit with a crane. Dimensions for transport: approx. 21000 mm long, 3050 mm high (without cooling system) Bwsdpfx Aley Aawnsbon Sale from location 52146 Würselen, without dismantling, without transport and installation. Dismantling, loading, and transport by us optionally available. Subject to error in description and price. To avoid possible misunderstandings, inspection on site by appointment is possible and recommended. Sale as is.

Condition: used, mileage: 140,000 km, power: 338 kW (459.55 HP), first registration: 04/2019, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, MAN TGS 35.460 First registration: 04/2019 !!!!! ONLY 140,000 km !!!!! 8x4 Manual transmission Retarder/Intarder Air conditioning Euro 6 Crane: Fassi 365 Bodpfx Ajy Ha E Holbown Hook height 28m Extensions 6 + 4 on the fly jib Grab control Radio remote control Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 € Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer to Munich Airport or Passau train station