Gear motor 0.15/0.28 kW 20/40 rpm

VEM ZG28MREB 71 K 8

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Fedpfx Ahjfc I Hae Nsgc Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH More technical details you found in the Datasheet.

Condition: used, Technical details: lifting capacity in kg: 6600 kg fork length: 1.500 mm Lifting height: max. 3.700 mm track width: vorn: 1.800 mm track width: hinten: 1.400 mm axle distance: 2.200 mm voltage: 15 V / Hz Number of working hours: 416,0 (Stand: 28.07.2025) noch in Betrieb h weight approx.: 9.500 kg dimensions L x W x H: 5,2 x 2,0 x 2,8 m - Mast = Duplex design - Fork carriage width max. 1800mm - Load center of gravity: at 600mm = 6,600kg; at 700mm = 6,105kg and at 800mm = 5,685kg Fgjdpfx Ahju Nwl Us Noc - with coupling (pin Ø 40mm) *

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Fodsu Nu R Ijpfx Ah Negc Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control *

Condition: used, centrifugal pump, water pump -Flow rate: 88 m³/h -Max. H: 50mWs -Motor power: 18.5 kW -Speed: 2935 rpm -Inlet pipe connection: DN 65 -Pipe connection outlet: DN 50 -Number: 1x pumps available -Price per piece -Dimensions: 710/390/H365 mm -Weight: 164 kg Fedocnz E Hopfx Ah Nogc

Condition: good (used), Bookbinding Guillotine Ideal 1046 Fgjdpfsvfukpsx Ah Nsc Cutting line length: 460 mm Maximum cutting thickness: 0.8 mm Type of cutter: scissor Safety Cover: Yes Format limiter: Yes Work table dimensions (W x D): 356 x 510 mm

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Length 1.50 m - PLC-controlled Formats up to B4 Various distances between carriers possible Preset counter, total counter Fgsdpech Iv Nsfx Ah Nsc Control via reading possible (e.g., bundle change)

Condition: used, Year of construction: 2004, Technical details: lifting capacity in kg: 1500 kg Lifting height: 3300 mm weight approx.: 2200 kg voltage: 24 V / Hz Number of working hours: ca. 6090 h dimensions L x W x H: o.Gabeln: 1,8 x 1,1 x 2,15 m voltage: Motor: 24 V V / Hz Fgodpfsu Nv U Usx Ah Noc - Lift mast = Duplex version; attachment U E911 - Fork carriage width max. 750mm - Forks W: 80mm x D: 40mm x L: 1200mm - Chassis: track width front 870mm; axle distance 1.200mm - 2 tires front and 1 tire rear - with coupling pin Ø 25mm accessories: incl. battery type Pp.; 24V; 14,7 kW; capacity 805 Ah; weight 637kg charger RTM Nuova Elettra 3,360 kVA *

Condition: new, SEW Eurodrive K57 DRS71M4BE1/ASE1/TF/Z Motor SN: 01.7566848001.0001.18,unused, 100% functional, scope of delivery according to photos Fgedsl Echwepfx Ah Nec

Condition: excellent (used), Drilling depth 14 cm Drilling height 14 cm Drilling width 23 cm Fedpfxjupz Tze Ah Nogc 2 kW motor Very good condition.

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm Fgodedq Tt Hepfx Ah Nec -Through hole: Ø 80 mm -Weight: 24 kg