Roller conveyor

unbekannt -

Condition: excellent (used), length 340 mm diameter - cutter standard 210 mm weight 25 kg dimensions 0,5 x 0,3 x 0,3 m Master gear for gear checking machines. Gjdoy Ivdnjpfx An Rebl Neccessat´ry for calibration!

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Gbsdpfx Aned Du T Io Rol Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: used, Jaw width: 155 mm jaw height: 55 mm Clamping length (without special jaws): 170 mm Vertical swivel angle: + 90/- 15°. Height horizontal: 200 mm Required space: 650 x 380 mm Gedpfx Aec R Slqen Rjbl

Condition: used, Outer-Ø: 350 mm Gbodpfoc Snupex An Rel inner-Ø (passage): 125 mm Overall height: 100 mm

Condition: new, Year of construction: 2023, arm reach: 1,400 mm, load capacity: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Type: AB6-C1400 Gbsdpfxjqnt N De An Rel -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding source: TIG WSM400R -Cooler

Condition: used, Jaw width: 130 mm Jaw height: 43 mm Gedpfx Ansb Eg Rho Rsbl Clamping length: 100 mm Overall height: 175 mm Vertical swivel angle: + 15/- 45

Condition: used, gr. working width: 1020 mm for sheets (steel sheet) up to: 1 mm Gbedpfxeb Hlyrs An Rel space requirement: 1420 x 650 x 1160 mm Weight: 250 kg

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Gbjdpfx Aouddcasn Rjl Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: used, Load capacity approx.: 4 t Platform size: 1500 x 3000 mm Platform height: 600 mm Gbedpfoc H Tmtjx An Rjl Weight approx.: 600 kg

Condition: used, gr. working width: 1040 mm Folding width approx.: 12 mm for sheet thickness up to approx.: 1 mm Gbedpfxocaxtxo An Rel Drive motor, gear brake motor: 380 V, 0,55 kW space requirement: 1300 x 480 x 960 mm Weight: 334 kg

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min Gbjdpfx Ashpktvon Rol total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: used, Jaw width: 150 mm Gjdpfeb Eg Rcsx An Rebl jaw height: 45 mm clamping length: 130 mm overall height: 185 mm Vertical swivelling: + 20/- 45°.

Condition: used, Technical details: voltage: 220 V / Hz Gbodpfx Asu Ngx Djn Rjl revolution per minute: nicht bekannt U/min weight: 59 kg dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding block mounted on stand, foot mounting possible *

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm Gedpfog U Uv Rex An Rebl 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S