Combined machine

Steko 228 P.B.S. Pressen - Schleifen - Sägen

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Nkjdecnw U Depfx Ahvsu Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: excellent (used), Year of construction: 2019, For sale is a used Hammer B3Winner Comfort circular saw and router with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: - Circular saw and router tiltable 90-45° - Sliding table 2000 mm - Outrigger table with degree grid index - Miter stop 1300 mm Nkjdpjv Sbpxsfx Ahveu - 4 routing speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each with 5.5 HP (4 kW) 400 volts - Year of manufacture 2019 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, milling machine, combined machine, combination machine Reference: R-L0AHG

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Kubota engine 18.2 kW * Operating weight 2,100 kg * Lifting capacity 2,260 kg * Tyres 27x10.50-15 SKID (machine width 116 cm) * 1st auxiliary circuit (DW) proportional on joystick incl. continuous operation Nodpfxsw Hxtij Ahveku * ROPS cab including heating/2 mirrors/2x halogen work lights front & rear/radio – mechanically suspended, adjustable comfort seat with seat belt + armrest * StVZO package up to 20 km/h * Road lighting (halogen) * Mudguard extensions * Rear counterweight plate (90 kg) incl. shunting coupling * Standard bucket 1,200 mm wide and pallet forks 1,000 mm

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Njdpfspfatpox Ahvjku Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: new, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: 268955558, GREMAC e1 trommel screen Tandem chassis / axles 2x kg ( permissible total weight) Nedsl Hbcfopfx Ahvoku kg empty weight without aggregate Overrun brake Vehicle lighting according to StVzO TÜV acceptance Drum length: mm Diameter: mm 4,0 kW electric drive speed adjustable with frequency converter driving screw adjustable cleaning brush hopper with conveyor belt rubber belt with chevron profile 0,75 kW electric drive speed adjustable with frequency converter Fine grain collecting belt Movable suspension Rubber belt in smooth design 1,5 kW electric drive Speed adjustable with frequency converter Fine grain belt Movable suspension Rubber belt with chevron profile 2,2 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Over-grain stockpile conveyor Movable suspension Rubber belt with chevron profile 1,5 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Control system PLC Siemens Logo Control panel with buttons and potentiometers 400V load circuit 24V control circuit Main switch Ceekon 16A socket EMERGENCY OFF relay Without generator Cladding Hot galvanized frame parts painted drum cladding powder coated in RAL7005 and 5018 Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 74-4-10, functionality: fully functional, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer Nsdpeipvrbsfx Ahvsku 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: new, Year of construction: 2023, power: 7 kW (9.52 HP), planing width: 520 mm, number of blades: 4, overall weight: 483 kg, height adjustment type: electric, planer shaft diameter: 120 mm, planing height: 240 mm, SCM MiniMax s 52es thicknesser Specifications: - condition - new - manufacturer - SCM - width of the thicknesser table - 520 mm - length of the thicknesser table - 850 mm - minimum thickness of the element - 3 mm Nksdsqu U Dnjpfx Ahvju - maximum thickness of the element - 240 mm - maximum thickness of the thicknesser harvest - 5 mm - motor power - 7 kW - supply voltage - 400 V - shaft for 4 conventional knives - diameter of planer shaft - 120 mm - rotational speed of the planer shaft - 5000 rpm - maximum planing width - 520 mm - feed speed - 5 / 8 / 12 / 18 m/min - diameter of the exhaust stub - 120 mm - weight (net) - about 493 kg - overall dimensions - 144 x 108 x 110 cm ( W x L x H ) Additional information: - machine brand new - pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transport costs - available from stock in Italy

Condition: used, Thickness planer: Max planing width: 400 mm Max planing height: 240 mm Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Cutter shaft guard Extraction port: 2x120 mm Tilting fence Supply voltage: 400 V Motor power: 5 kW Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm Nkjdpfxoxwvqdo Ahvju

Condition: new, Year of construction: 2026, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table Nksdpfx Aehp Rdlohvsu High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Year of construction: 2022, condition: new, angle: 0° - 90° max cutting length: 1370 mm Nkedji Ezr Nspfx Ahveu