Steel cable for cable hoist 1.6 t

Stahl Ø 12 mm 40 m

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 12 mm -Length: 40 m -Transport dimensions: 560/220/H500 mm Iedpfx Abjxbx N Douear -Weight: 21.2 kg

Condition: good (used), Tailstock Quill size: MK 2 Quill stroke: 30 mm height-adjustable Tip height of 250-285 mm of - 5 degrees to plus 15 degrees of tilt Floor area 230 x 155 mm Weight 27 kg Iaedpfx Abodlp Txjuer

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Iedpswt Sy Asfx Abuoar Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Iaedpfx Absymznhouer Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Iasdow T Tcwopfx Abuor Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: ready for operation (used), Year of construction: 1984, turning diameter over cross slide: 300 mm, spindle bore: 51 mm, turning diameter: 575 mm, center width: 2,000 mm, spindle speed (max.): 1,600 rpm, overall weight: 2,200 kg, capacity 2000x575 mm diameter 300 mm on cross-slide spindle bore 51 mm Isdpjyar Apofx Abusar external electrical cabinet weight 2200 kg

Condition: used, Year of construction: 2005, AMADA - HFT 80-25 - 2005 - 80 t capacity - 2500 mm table - stroke 200 mm - weight 5750 kg - under power - used machine, good condition Iaodpeytrwtsfx Abujr

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2410, Year 2001 with Fanuc Deco and 10 axes Fully inspected and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1500 kg Customs tariff number: 8458.11 20 Dimensions: 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard execution) Headstock (Z1 axis) (+C axis optional) Maximum bar passage diameter: 10 mm Maximum workpiece length, depending on guide bush: 60/90 mm Programmable spindle speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of transverse drilling/milling tools on turret: 4 Programmable rotation speed: 0-12,000 rpm End-working attachment (X3/Y3) Max. number of end-working tools: 3 Programmable rotation speed: 0-12,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C axis optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or rotating spindles: 4 Maximum spindle speed: 9,000 rpm Tornos-Bechler/Fanuc specific CNC control Processor type: 486 DX2 Iedpsw T Tfrefx Abuear Number of simultaneous axes: 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details are subject to verification and provided without guarantee.

Condition: good (used), Year of construction: 1957, Ref. -No.: 10573 Manufacturer: VDF Type: W 40 Year of construction: 1957 Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Machine-No.: 030XXXX Turning Diameter: Ø 960 mm Ijdpfsxmd Upox Abuear Turning Length: 4500 mm Spindle Speeds: Ø 105 RPM Turning diameter over cross slide: Ø 600 mm Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1982, functionality: fully functional, pressing force: 90 t, stroke length: 100 mm, operating speed: 7 mm/s, reverse speed: 80 mm/s, overall weight: 5,000 kg, CNC Hydraulic Press Brake Brand: Mebusa Model: PH 90-25 Year: 1982 Weight: 5,000 kg Mebusa/Mecos control, model M202 *Capability to create programs with multiple steps. Bending length: 2,500 mm Force: 90 tonnes Axes: 2 (Y, X) Throat depth: 400 mm Iajdpfxsx Scv Eo Abujr Stroke: 100 mm Approach speed: 45 mm/sec Working speed: 7 mm/sec Return speed: 80 mm/sec Delivered with: - New four-sided mono-V die (V16 mm, V22 mm, V32 mm, and V50 mm) in 835 mm sections - Set of punch tools for 2,500 mm at 35 degrees - Various batches of Promecam punches, 90 degrees (see photos of punches on pallet)