Ballistic separator

Stadler

Condition: used, Hinge, door hinge, folding hinge, steel hinge, side wall hinge -Manufacturer: Stadler, hinge stainless steel with extendable pin -Type: 2-part 100/50 mm height 30 mm see photos Dsdpfx Aksulp A Ascecg -Article No.: 10002174 -Number: 14x hinge available -Price: per piece, minimum order 2 pieces. -Total dimensions: 100/50/H30 mm -Weight: 0.2 kg/piece

Condition: good (used), tem: D-7856-Samson-steam Valves Diverse steam valves made by Samson complete with control box! For more informations please contact us! DN 20/DN40/DN50/DN65/ Dcedpsirfb Eofx Akcjg

Year of construction: 2012, condition: used, Technical details: Number of working hours: ca. 700 h number: Rotormesserhalter: 5 number: Stattormesserhalter: 4 Rotor-Ø: 440 mm material: PET Dcjdpfeu Nw Ebjx Akcog control voltage: 24 VDC kW Cutting mill (shredder) The plastic granulator is intended for industrial use. Application: Size reduction of all kinds of plastics, such as ABS, POM, PA6, PE, PP, PG and PET Plant consists of a granulator with belts and a bottle bunker. Material is fed into the bunker via feeding belt Hopper 20M2 V2A complete with gear motor 7,5 kW, The screw conveyor is activated by the control system of the granulator. Bucket volume approx. 20 m³, HxWxD: 4400x3300x3300mm, weight approx. 27,0 to, Bunker with discharge unit CentriCut 44SR granulator 55 kW, granulator 55 kW (50Hz, 400Volt) and feed screw 55 kW (50Hz, 400Volt) Grinding chamber: rotor knife length 272mm, weight approx. 2.0 to Conveyor belt NT9, belt length 3500mm, useful belt width 416mm, (guide profile height 60mm, driving bar height 60mm, driving bar distance approx. 500mm) total length 3550mm, total width 780mm, total height 2350mm, weight 250kg Sound insulation LxWxH: 2700x2300x2500mm, weight 1,3 to Tunnel detector 600 is integrated into the CentriCut cutting mill on the control side, scanning side 600mm, passage width 840mm, passage height 400mm, weight approx. 150kg The plant is ready for transport and for sale. i.D. *

Condition: good (used), functionality: fully functional, 2 Pcs. “Steinert NES 200 220 E 5009” for Sale Djdpfsxb Tbzjx Akcscg Manufacturer: Steinert Type: NES 200 220 E 5009 Belt widthness: 2.000 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features: - Large loading opening for cardboard - Possibility of automatic feeding (e.g., via conveyor) - Manual wire tying (4 wires) - Pallet lock and hydraulic doors for bale removal Advantages of this press: - Large bales – fewer transports - High pressing force Djdpfora Dddsx Akcecg - Designed for continuous operation Available production years: 2016–2020

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Dedsfhb Tkspfx Akcocg

Condition: good (used), functionality: fully functional, “Steinert NES 100 220 E 5009” for Sale Manufacturer: Steinert Type: NES 100 220 E 5009 Belt widthness: 1.000 mm (New belt) With new control-unit. Dedpsxb S Srefx Akcecg Overhauled, balanced, sandblasted and painted.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Dsdpfx Akeqabm Eococg Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Djdovf E Avjpfx Akcjcg Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, Year of construction: 2025, Engine power 7,5kW - Cutting force 30to Cutting channel designed for Dcsdpfxsgl Adzj Akcog - max. roll length 1500mm - max. roll diameter 850mm - machine weight approx. 3500kg - tank capacity approx.110liter - hand guard in the area of the control panel and opposite to it -knife lock -splitter table straight execution -documentation 2-fold German ( 1x text form, 1x CD ) -color RAL 5012 - light blue protective grid/knife bar RAL 1028 melon yellow machine in stock and immediately available Price and further info on request