Conveyor belt, L: 6,100 mm

SPÄTH 1000003874, FB: 600 mm

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. Offer includes. 1. Weinig high speed 820 right angle moulder outfeed. 2. Weinig 811 moulder outfeed, scissors lift with pack chains 3. Weinig additional outfeed pack chains to transfer to a roller conveyor system. System of operation. Prjdpfx Afexftvao Ssb -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° Psdpfx Asd Tyvxof Ssrb - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Year of construction: 2025, condition: as good as new (ex-display), Our mobile winder, is one of our demonstration machines, condition good, slight scratches on the housing and on the chassis, Warranty 12 months, completely checked and serviced. On request with optional accessories such as a wide feeler strap. Warranty: 12 months (single-shift operation), The advantages at a glance: - Working area of only 750 mm around the pallet - Extremely compact design - Patented steering system - Compared to its competitors, it takes up to 40% less space - Easiest handling - German support - Upgrades are also optionally available later The LEO only needs 75cm (about a shoulder width) around the pallet to be wrapped. WORKSPACE Pallet size: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / without limit Width: min. 600 mm / without limit Machine dimension: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (optionally also lower possible) FILM DATA Wrapping programs: - Foot and head wrapping - Cross and one-way winding - with stop for cover sheet support Film width max. 500 mm Core diameter max. 76 mm Outside diameter max. 220 mm MACHINE DATA Tension: - Battery: 2x 12 volts - Charger integrated 220 volts - Drive: 2x 24 volts - Foil slide: 1x 24 volts Foil carriage: Podpfohfc Risx Af Serb - own parameters for up and down movement - Mechanical film brake - stepless adjustment Control: - Touch panel with digital display - Speed dial buttons - Drawbar with navigation buttons - Pallet detection via tactile belt - Emergency switch - 6 storable working modes - Double collision protection Mast: Stationary construction Weight: 195 kg CE marked machine the wrapping of black products or the use of black stretch film. and can be charged with any cable with a Euro mains plug at a 230V household socket. Such a charging cable is of course part of the scope of delivery.

Condition: used, Parquet mosaic production line length 160 mm: Prjdpfx Aetp I Hcef Sjb 1. Schroeder mosaic press MTA-2 PE 1992 r 7,3 KW 2. Schroeder feeder PST 1992 r 3. Schroeder feeder SB35 B 1992 r 4. schroeder feeder BA-2 1992 r 5. schroeder feeder BA-2 1992 r 6. Schroeder feeder SB35 B 1992 r 7. WENIG GMBH P 120 double edging machine 8. WENIG GMBH P121 Thicknessing machine with cutters ( not Hollowing heads) 9. WENIG GMBH P122 multi-saw 10. WENIG GMBH 135 sorter - sorting system for 3 classes with interchangeable magazines (containers). Magazines 200pcs.

Condition: used, Year of construction: 2008, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor Prjdpfeq I Ty Rjx Af Sjb belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2026, condition: used, NEW Automatic loading and unloading station.Suitable for wood, MDF, solid wood, drywall, cement fiberboard, and boards. Examples: Doors, boards, MDF panels, cabinet fronts, drywall, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel Technical specifications: Predpfxjy Iv N Re Af Sjb - Working width 1.300 mm. - Includes belt conveyor, length 3,400 mm - Working height 930 ± 20 mm - PLC control, operated via a touch panel, Siemens S7-1200 - 2-circuit vacuum system - Loading and unloading of parts via vacuum suction cups - Special suction cups with position adjustment - 4 additional suction cups to lift the panels 15 mm on one side before vertical movement. - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 100 kg, continuous operation 85 kg - Max. component width: 1,300 mm - Max. component length: approx. 3,050 mm - Max. conveyor belt speed: infinitely variable up to max. 10 m/min. - Electric motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,500 kg YouTube link:

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 960044/2, functionality: fully functional, input frequency: 50 Hz, overall weight: 1,600 kg, year of last overhaul: 2026, Equipment: CE marking, Available: RBO Transfer machine, year 1996, a robust and reliable industrial machine, immediately ready for use. Key features: CE marking Perfectly functional Robust structure and high-quality industrial construction Complete with 5 discharge tables Ideal for continuous production and intensive operations Psdpfx Ajy S Ua Asf Sjrb This machine is suitable for companies that require an immediate solution, without downtime and without further investment in major overhauls. Condition: excellent – ready for production Available for inspection by appointment Dismantling and transportation are the responsibility of the buyer Attractive price, negotiations are confidential.

Condition: used, For sale is a used gearbox from our stock: • Manufacturer: ZF (No type plate available) • Model/Type: Duoplan 2K300 • Housing number / casting number: 4161 111 065 • Type plate: Not available (type identification based on casting number) • Condition: Used / untested Condition description: The gearbox is in visually flawless, very good condition. For logistical reasons, we unfortunately do not have the possibility to technically inspect the gearbox in-house. Therefore, the sale is expressly made in its current condition ("as is") as an untested item and with the exclusion of any warranty. Advantages & Service: Pedpjy Tht Sefx Af Sjrb • Immediately available from stock • Inspection on-site is possible at any time by prior arrangement • Quick loading with a forklift is no problem for us • We reserve the right to sell the item to another buyer.

Condition: used, functionality: fully functional, conveyor belt length: 5,170 mm, conveyor belt width: 400 mm, conveyor belt speed: 350 mm/s, total length: 5,250 mm, total width: 565 mm, total height: 340 mm, Manufacturer: AXMANN Year of manufacture: unknown Overall dimensions: approx. 5,250 x 565 x 340 mm (LxWxH) Width incl. side panel: 485 mm Side panel height: 120 mm Width incl. drive: 565 mm Conveyor length: 5,170 mm Conveyor width: 400 mm Belt type: PVC, smooth Belt width: 400 mm Substructure: none Drive: head drive Prjdpsw Uit Isfx Af Seb Motor: drum motor Conveyor speed: max. 0.35 m/s, constant Condition: used / fully functional Function test: OK

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 5140-600-500 RA2082 Technical data: Conveyor length (NL): 5140 mm (4640 mm incline + 500 mm arch) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): please contact us Drive: SEW gear motor Pjdpfx Afen Tpvke Sjrb Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics