Dust extractor
Spänex SMU-60

Name: Spänex SMU-60
Brand: Spänex
Availability: InStock

Year of construction

2022

Condition

Used

Location

Bad Sooden-Allendorf Germany

Show map

Machine data

Machine type:: Dust extractor

Manufacturer:: Spänex

Model:: SMU-60

Year of construction:: 2022

Condition:: reconditioned (used)

Functionality:: fully functional

Price & Location

Location:: Werrastraße 20, 37242 Bad Sooden-Allendorf, Deutschland

Call

Technical details

Input voltage:: 400 V

Input current:: 16 A

Type of input current:: three-phase

Volume flow:: 6,000 m³/h

Intake manifold diameter:: 300 mm

Total height:: 2,000 mm

Total length:: 3,100 mm

Total width:: 900 mm

Overall weight:: 850 kg

Compressed air connection:: 6 bar

Nominal flow rate:: 5,060 m³/h

Negative pressure:: 2,700 Pa

Nominal power:: 7.5 kW (10.20 HP)

Details about the offer

Listing ID:: A21225602

Reference number:: G7527

Update:: 12.02.2026

Description

Bin volume 3x165 l, jet-pulse cleaning. Housing is vacuum-tight and pressure surge resistant above 200 mbar, equipped with suction connection and non-return valve, antistatic and water- and oil-repellent filter elements with jet-pulse cleaning system. High-performance radial fan with three-phase motor of energy efficiency class IE3 is installed on the clean air side, featuring integrated exhaust silencing and air outlet grille. Unit is mounted on 2 swivel and 2 fixed castors. Includes 3 chip containers with discharge bags, a control system with CEE industrial connector, and integrated fire extinguishing system preconfigured for connection to local water supply (water connection 1/2", min. 0.5 bar). The control is designed for automatic operation. Automatic start control for up to 6 machines and automatic filter cleaning with runtime addition are included. For automatic start-up, either current transformer coils or volt-free contacts from the machine can be used.
Kledpfx Aeyi Efcegzen

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2009

96 listings online

Call

Send inquiry

Telephone & Fax

+49 5652 ... show

Fax:

These listings may also fit your interest.

Listing

Ultrasonic washing machine Glogar ULTRA 200

Linz-Land

18,295 km

Ultrasonic washing machine
GlogarULTRA 200

Call

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift Kedpfx Agsv U A Izjzsln - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration system from the Glogar Technology Center, available immediately

See details

Listing

Deinze

18,734 km

Tube bending machines
ArloSPB60 CNC

Call

Condition: ready for operation (used), total length: 900 mm, total width: 400 mm, total height: 1,100 mm, empty load weight: 140 kg, gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm Klsdpfx Aexllirogzon doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 2,5 rpm video klik hier Motor power: 1,5 kWt

See details

Listing

Cloppenburg

18,378 km

2010 Vollmer CL 200
VollmerCL 200

Call

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Kodpfx Agowp Eblszsln Tooth pitch: 6 - 120 mm Cutting length:

See details

Listing

Hollow face carbide saw grinder VOLLMER MHZ

Suzzara

18,666 km

Hollow face carbide saw grinder
VOLLMERMHZ

Call

Listing

Four Column Press - Hydraulic SORG 500 To Viersäulenpresse S 500-2K

Ennepetal

18,538 km

Four Column Press - Hydraulic
SORG500 To Viersäulenpresse S 500-2K

Call

Condition: refurbished (used), Year of construction: 2020, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi Kedpjffamvefx Agzjln

See details

Listing

Oil temperature control unit Rummel Kunststofftechnik GmbH TEMP2 150 9A SSR

Treuchtlingen

18,496 km

Oil temperature control unit
Rummel Kunststofftechnik GmbHTEMP2 150 9A SSR

€2,400

ONO plus VAT

Call

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay Klodpfoddv Itox Agzjn -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

See details

Listing

Aspiration system 8900 m3/h Optimat OT 8900 m3h

Gorzów Wielkopolski

18,013 km

Aspiration system 8900 m3/h
OptimatOT 8900 m3h

€3,800

EXW fixed price plus VAT

Call

Condition: new, Year of construction: 2026, extraction capacity ~ 8900 m3/h engine power 7.5 kW rotation speed 3000 rpm/m rated voltage 400 V, 50 Hz extraction nozzle 300/200 mm extraction speed 28 m/sec. number of filters 45 Kjdpev Dvbaofx Agzjln filter category G filter material polyester noise level 80 dB without connection / 65 dB when connected via pipe to the machine filter surface 22 m2 dimensions 920 x 2260 x 2250 mm weight 450 kg negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Traction Filter cleaning by vibration system with control + 850 euros for model with fire extinguishing system (Safe System) + 550 euros for model with inverter (speed regulation)

See details

Listing

Mobile dust extractor Schuko Vacomat 200 XPE

Wiefelstede

18,341 km

Mobile dust extractor
SchukoVacomat 200 XPE

Call

Condition: good (used), Year of construction: 2011, Compact dust extractor, dust extractor, dust extraction blower, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, filter system Cartridge dust extraction system, clean air system, clean air dust extractor -Filter system: Höcker Polytechnik Vacomat 200 XPE mobile dust collector -Nominal flow rate: 2260 m³/h -Exhaust fan: 3.7 kW -Intake manifold: Ø 200 mm Klodoxu Dybspfx Agzen -Individual components: electric filter cleaning, 3 chip containers, see photos -Dimensions: 890/2620/H2120 mm -Weight: 440 kg

See details

Listing

Lödige mixer FKM 4200D Lödige FKM 4200 D

Warburg

18,434 km

Lödige mixer FKM 4200D
LödigeFKM 4200 D

Call

Listing

Gerolzhofen

18,473 km

Suction device
AL-KOPower Unit 300P

Call

Condition: used, Year of construction: 2006, Used, in excellent condition Low operating hours Ex-government unit Manufacturer: Alko Model: Power Unit 300 P Year of manufacture: 2006 Clean air unit / negative pressure GS dust certified CE type tested Motor 7.5 kW Connection diameter 300 mm Pressure 2,400 Pa Airflow 6,000 m³/h Collection drums 900x600 mm Kedpfx Asx Nqvhogzsln Filter area 30 m² Automatic/pneumatic filter cleaning Filter pressure monitor Soundproofed Integrated extinguishing system Original price approx. 19,545 EUR Space required approx. 3,000x1,058x2,361 mm Weight approx. 880 kg Storage location: 97447 Gerolzhofen, loaded free, unpacked Handed over in as-inspected condition, without warranty or guarantee.

See details

Advertise here

Dust extractorSpänex SMU-60

Machine data

Price & Location

Technical details

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Dust extractor
Spänex SMU-60