C400 combi machine with 5 operations

Sicar C400

Condition: new, Year of construction: 2024, functionality: fully functional, PILLAR table length 2600mm undercutter blade angle adjustment Iasdpfx Ahovitbue Nol up/down blade adjustment maximum blade diameter 300mm MILLER spindle diameter 35mm spindle revolutions 2000/3100/4400/7000 rpm up/down spindle adjustment LEVELLING AND THICKNESSING MACHINE working width 410mm 3-knife shaft length of worktops 1800 rpm maximum height of material 220mm feed 1 gear HORIZONTAL DRILLING MACHINE

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Ijdpfjff Hdpjx Ah Nsal Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 533 S. Heavy professional design with high dead weight for maximum running smoothness especially smooth and precise running thanks to torsion-free machine housing large dimensioned cast iron saw table in one piece, tiltable from 0° to +20° with ground and polished surface patented table tilting device with hand wheel and toothed rack saw band quick clamping ceramic saw band roller guide large cast iron parallel fence fast and precise cutting height adjustment via handwheel and toothed rack with millimetre scale safety switch for automatic shut-off when opening the door large cast iron parallel fence standard with angle stop flywheels made of grey cast iron with special coating on the running surfaces Inspection window for checking the saw blade running Professional saw table guide the heavy, massive saw table made of grey table is easily and comfortably adjusted by a handwheel rack and pinion guide system the inclination is steplessly adjustable from 0° to +20°. Patented working table dimensions 750 x 530 mm cutting speed 1400 m/min. Iodpfx Aheb S Uzke Njal flywheel Ø 530 mm max. cutting height 350 mm max. cutting width with fence 465 mm max. cutting width without fence 510 mm band saw blade length 4190 mm precision guide top / bottom saw table inclination 0° - +45° motor power 400 V/50 Hz/P2 4,0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Suction port diameter 2 x 100 mm Location: ex stock Bitburg

Condition: excellent (used), 5-axis combined machine (thickness planer, jointer, mortiser, saw, and router) Iaodpswh U Eqsfx Ah Njl Thickness planer: Usable width: 310 mm Usable height: 230 mm Cutter block: 3 planer knives Joint planer: Usable width: 310 mm Table length: 1400 mm Shaft diameter: 70 mm Router: Spindle diameter: 30 mm, length: 125 mm Table width: 800 mm Router stop Saw: Saw blade diameter: 250 mm, pivotable by 45°. Cutting height with 250 mm blade: 80 mm Table width: 800 mm Rip fence length: 635 mm Mortise drilling machine: Mortise milling from (0 to 16 mm) Power and motors Voltage: 380 V Connection: Three-phase Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, The Meisterturn 400 V is a state-of-the-art conventional horizontal lathe designed for precision machining in the realm of engine lathes. This machine ensures high accuracy in single parts and small batch production, making it ideal for tool and mold construction, as well as training applications. Equipped with features like an infinitely variable spindle speed reaching up to 2,500 rpm and an integrated constant cutting speed function, the Meisterturn provides optimal performance during face turning, comparable to CNC capabilities. Its robust design includes a heavy cast-iron bed with dual v-guides, a high-capacity spindle for efficient clamping, and safety features such as electromagnetic brakes and an enclosed oil bath for gears. With an ergonomic machine enclosure, user-friendly control panel, and an extensive equipment package including a 3-jaw chuck and cooling system, the Meisterturn is perfectly tailored for demanding production environments. You can request a quote for this exceptional engine lathe today. Iedpfx Ajqzhhlsh Nsal

Condition: new, Year of construction: 2026, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table Iasdpshp Rdljfx Ah Njl High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Iaodexrr Uzopfx Ah Njl Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Technical specifications: Main saw blade diameter (mm): 550 Panel cutting with pull-out fence and sliding table 3200 mm: 3200x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scoring blade motor power [S6 -40%] Hz50 kW: 9 Cutting width at rip fence (mm): 1000 Standard equipment and accessories: - Optimizer/processing control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machinery fleet and materials or panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), and import cutting lists * Optimize cutting lists by selecting one or more proposals from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to the simple and intuitive graphics of the 3D sequencer that guide the operator through every step * Print barcode labels for marking different parts via Bluetooth with compatible label printers - 10-year warranty on the sliding carriage system - Maximum saw blade diameter: * Up to 450 mm with scoring saw blade mounted * Up to 550 mm without scoring saw blade - eye-S 15" electronic control system including: Ijdpfx Ahoxavrgs Nsal * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Rip fence adjustment - Scoring blade height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cutting operations * Storage capability for up to 1000 programs with corresponding images * Storage for up to 1000 different tools with corresponding images * Cutting sequence management for preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut App * USB port * Prepared for network connection - Auxiliary function of the electronic control system, including: * Determination of the correct stop position on the longitudinal fence for panel machining with tilted saw blade * Determination of the correct stop position on the longitudinal fence for angle cuts with the mitre fence on the work table with or without tilted saw blade - Swivelling control panel above table

Condition: used, color: other, Year of construction: 2011, operating hours: 2,496 h, GVW: 950 kg Make of engine: Kubota D1105 Serial number: 9K12421 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. Iajdpfxewai Hms Ah Nsl All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: new, functionality: fully functional, Year of construction: 2024, The Rotection flow packaging machine is suitable for packaging various products. A big operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Operating display: 10" touchscreen, can be swiveled using the extension arm for comfortable operator handling Drives: Servo Packing length: 900-450mm Packaging width: 35-200 mm (depending on film width) Packing height: 5-80 mm (depending on forming shoulder) Speed: 30-100 bags/min. in continuous operation Speed: up to 60 bags/min. Intermittently Film width: 90-400 mm Ijdpfjq Ikhhjx Ah Njal Consumption: approx. 8 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 800 kg System dimensions: approx. 4370 x 1020 x 1550 mm (LxWxH) Error rate: < 5% Print mark sensor: Yes Winding shaft: fixation of the roll by hand without compressed air including roll stop for precise application Roller mount and guide: Overhead Printer holder: possible for an extra charge We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.