Haul Off for hose extrusion line

SICA C800

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t Bedpjwtpfpefx Aafslc ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: new, Year of construction: 2025, functionality: fully functional, The granulate mixer is available in 6 versions: Design can be stainless steel or painted steel: Technical specifications : MV 2 The MV 2 for the complete mixing of all plastic granules, due to the forced guidance by screw sleeve. Tank capacity : 120 kg/ 200L L x W x : 700 mm x700mm x height: 1050mm/ 1250mm - screw, removable - Control for mixing times - suction device Bjdpfod R Atrjx Aafelc - 1 drain - Underframe mobile, castors 100 mm, all with locking brake.

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % Bljdpfx Aew Nhavoafoc L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125 Bedevryhyspfx Aafelc

Year of construction: 2009, condition: good (used), Load capacity: 30 t Bsdpfx Aaoqiz N Rsfslc Fine lift Lifting height 9 meters

Year of construction: 2009, condition: reconditioned (used), 100t turning roll, rollerbed workpiece diameter 500mm-7.500mm speed 130-1.250mm/min Bljdpjmk Iktjfx Aafsc availible for renting

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Bodpfx Aaeduyyzefelc

Year of construction: 1982, condition: good (used), machine/vehicle number: 82-540, Offer 18474 Technical data: - Flat steel shears cuts flat up to 100 x 18 mm - blade length approx. 250 mm - Profile steel shear cuts angles - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar steel shears cut round steel 90° up to 36 mm - square steel 90° up to 30 mm - Notching device sheets up to 8 mm Bjdpfx Ajg Eubneafjlc - Hole punching machine - pressure capacity approx. 50 t - throat 350 mm - punches in steel up to 20 mm Ø in 15 mm - drive 400 V / 3 kW - space requirement approx. W 1100 x H 1700 x D 2300 mm - weight approx. 1900 kg

Condition: good (used), Electric transformer E.R.E 1 250 kva Year 2002 Blodpfx Asr I Sm Esafec

Year of construction: 2026, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg Blsdpod Tyaasfx Aafsc - immediately available- Will be shipped for 90,- Euro net within Germany