X-crane traverse with variable chains

SHT X-Traverse STV

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Dksdpfxsinh Rqe Ac Noi Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic handler Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Tyre type front: Pneumatic Tyre size front: 400/70-24 Tyre condition front: 80 - 100% Tyre type rear: Pneumatic Tyre size rear: 400/70-24 Tyre condition rear: 80 - 100% Description: Hydraulic adapter for Manitou 2550 3rd hydraulic circuit, 4th hydraulic circuit, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, exterior mirrors, joystick, beacon, windscreen wiper, LED. Specifications: - Approval as a tractor with possible trailer operation - 20.0 t with 7-pin trailer socket - Fixed Dieci tool carrier mounting plate with double hydraulic quick coupler operated from the cab for attachments, including hydraulic coupling (Forks require an adapter plate for use with quick-change system). Hydraulic single-lever control unit with proportional simultaneous control (flow-sharing). Close-centre system including pressure relief kit for: - Lifting capacity 3,200 kg - Lifting height 8.65 m - Engine KUBOTA 79.5 kW (107 hp) - Displacement 3,769 cm³ - Emissions standard Tier 4f - Steering modes: all-wheel steering, crab steering, front-wheel steering - Rear hydraulics - 40 km/h - Air-suspended seat - Mounting plate with hydraulically operated quick coupler - Steering control warning light. Dkodpsw Eqddjfx Ac Nei

Condition: used, Year of construction: 2010, functionality: fully functional, 1 pc Surface Grinding Machine FS 640 SC with Fagor control Make: Geibel & Hotz Year of manufacture: 2010 Dkodsx Dgvqepfx Ac Nei Technical Data Working Area: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic chuck size 600 x 400 mm - Clamping area (table to spindle center) 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Grinding spindle motor power approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Cross/vertical feed speed 100-1000 mm/min Required space 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Equipment Machine-specific accessories, belt filter system, magnetic separator, extraction unit Magnetic chuck with adjustable holding force, automatic wheel dressing incl. compensation, Dressing diamond, balancing device, clamping device, 4 grinding wheels Technical data subject to change.

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dkodpfx Acokvmi Sj Noi Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Rotary indexing center RT100/12-26 Manufacturer: Pfiffner Serial number 1101141101 Dedpfji Ewn Eex Ac Neki Switch-on hours 42.500 footprint 14m x 8m

Condition: as good as new (ex-display), Year of construction: 2021, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Dkjdpfx Acshyc Nwj Nei Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 111-008668, For sale are two overhead travelling cranes, each equipped with two wire rope hoists per crane, each hoist with a load capacity of 3.2 tonnes, manufactured by ABUS, featuring radio remote control. Bridge span is 14,420 mm. Year of manufacture: 2018, in very good condition. Scope of delivery: 2 overhead cranes with 4 wire rope hoists, each 3.2 t capacity; remote control with charger and spare battery; power supply line MSL 4/100, 58.2 metres; documentation/inspection book. Technical data and dimensions: subject to change. For technical drawings, see the PDF document. Overhead cranes can also be sold separately. Dkedpfoycwxzjx Ac Nei

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 58,000 mm, first registration: 01/2016, mast type: telescopic, Year of construction: 2016, Drive: Wheeled Payload: 65,000 kg Gross vehicle weight (GVW): 42,388 kg Mast: Telescopic (4 sections) Mast length: 58 m Lifting capacity: 65,000 kg Superstructure make: GROVE RT765E-2 Dkodjwud E Tepfx Ac Nji Technical condition: very good Visual condition: very good

Condition: new, machine/vehicle number: 0620, empty load weight: 2,800 kg, maximum load weight: 20,000 kg, overall weight: 22,800 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, loading space height: 640 mm, tire size: 450x300x305, tire condition: 100 %, Year of construction: 2025, operation weight: 22,800 kg, Transportwagen TPW 20 AL-AS Typ: TPW 20 AL-AS Nutzlast: 20.000 kg Baujahr: 2024: Länge Ladefläche: 6000 mm Breite: 2000 mm Höhe: 620 mm Transportboden: 40 mm Fichte Lenkung: Allradlenkung-Achsschenkel-Niederflur Bereifung: 450x300 Zugdeichsel: 1.600 mm Lackierung: RAL 2000 #Schwerlasttransport #Innerbetriebliche Transportsysteme #Schwerlastanhänger 6-100 Tonnen #Schwerlastanhänger ab 3 Tonnen bis 100 Tonnen #Schwerlast Transport Plattformwagen #Plattform Schwerlastanhänger #Allradlenkung #Transportwagen #Niederflur Dodpfxohbh Rto Ac Nski

Condition: used, Distance between centers: 1000 mm Maximum external grinding diameter: 320 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø127 x 80 mm Maximum internal grinding diameter: 200 mm Center height: 175 mm Control type (CNC/manual): CNC CNC brand: FANUC CNC model: 16GC Maximum grinding length: 1000 mm Maximum workpiece weight: 130 kg Main motor power: 7.5 kW / 2870 rpm Total power: 30 kW Internal grinding spindle power: 15 kW Max. workhead spindle speed: 30 - 750 rpm Voltage: 380 V / 50 Hz X-axis feed: 0.0001 – 5,000 mm/min Z-axis feed: 0.0001 – 10,000 mm/min Air pressure: 1.5 - 3 bar Coolant flow rate: 100 L/min Max. Z-axis travel: 1050 mm Max. X-axis travel: 275 mm Max. worktable swivel: 8.5º Workhead internal taper: M 5 Tailstock taper: M 3 Tailstock quill travel: 35 mm Dimensions (L x W x H): 3,687 mm x 2,000 mm x 2,090 mm Dsdpfxoxxmcgj Ac Njki Weight: 5,200 kg