Geared motor 0.37 kW 43 rpm

SEW-EURODRIVE RF27 DT71D4/TF

Condition: good (used), geared motor, electric motor -Speed: 430 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm Gbsdpfx Agob A R Aqebeg -Protection class: IP 54 -Weight: 11 kg

Condition: ready for operation (used), Used machine Injection molding machine Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Bar spacing (mm) Installation height (mm) 250 Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Injection pressure (bar) 1878 Displacement (cm³) 275 Gedpou Ti Srefx Agbsbg Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons More photos on request.

Condition: used, machine/vehicle number: YS2R6X2000122xxxx, mileage: 600,000 km, Year of construction: 1997, Please contact ATS Norway for more information Please provide reference number upon request: 20740 Specifications: Km: Approx. 600,000, printer has been replaced Manual transmission Suspension: Steel - Air Tires (see pictures) 20T hook w/knuckle Multilift superstructure Trailer hitch Bed Ready for delivery Notes: Driveable on the surface, doesn't pull uphill as it should Some costs must be calculated here. Gedpfx Aewvy Itegbsbg Km: 600000 Technical approved: no EU-approved until: 10.06.2022 Own weight: 11500 Total Weight: 29000 Payload: 17425 Width: 250 Length: 820 Euro: 2 Gearbox: Manual

Condition: used, machine/vehicle number: YS2R6X2000200xxxx, mileage: 1,100,000 km, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 21048 Specifications : - 2005 model - Mileage: approx. 1,100,000 - Not EU approved since 2016 - Euro 3 - Wheelbase: 490 cm - Tires (see pictures) - Tool cabinet - Broken taillight - Automatic - 2x beds - Radio - Delivery by appointment Description : 2005 Scania R500 container truck with lift. ECT. The reason for the repair object is that the car has not been used for 9 years and it must be expected to cost money to get it in order. The car is big, but the owner says it only needs a booster to get it started. Delivery by arrangement. Km: 1100000 Gbsdjw Ia E Ujpfx Agbsg Technical approved: no Own weight: 1 Model: R500

Condition: used, machine/vehicle number: YS2R6X2000200xxxx, mileage: 700,000 km, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 21047 Specifications : - 2005 model - Km: approx. 700,000, new engine approx. 220,000 - Not EU approved since 2016 !! - Wheelbase: 470/136 cm - Tires (see pictures) - Spring: air - Retarder - Battery back - Tool cabinet - Automatic - Bed - AC/climate - Radio Gjdpfow Ia Enjx Agbebg - Delivery by appointment   Description : 2005 Scania R500 container truck with lift and replaced engine. ECT. According to the owner, the car has done 700,000 km, it is very old so this should be double checked. The car has had the engine replaced which Owner says it has done around 220,000 km. The reason for the repair object is that the car has been standing for 10 years, which must be taken into account in the cost of the car to get it EU-approved. Delivery by arrangement. Km: 700000 Technical approved: no Own weight: 1 Model: R500

Condition: new, Year of construction: 2025, Fully automatic liquid filling machine with 6 filling heads for filling volumes of different alternative ranges e.g. 50-500ml – customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder – uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: number of filling heads: 6; max. speed of the machine in neutral: 35 cycles/minute; accuracy: depending on chosen filling range and real filling volume; stainless steel version SS304 – all parts in contact with the filling material are made of SS316; power: 220V, 0.5kW; compressed air: 4-6bar, 0,4m³; machine dimensions LxBxH: 3500x1350x1800mm; weight: 850kg. - Mounting of servo motors instead air cylinders for dosing possible at a surcharge. Machine dimensions of servo version LxWxH: 3500x1350x1900mm. Gbsdjv Nk Rtepfx Agbeg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Motovario NMRV 050 angular gear i=5.0 , serial no. according to photo , hole spacing of mounting holes: 53 x 53 mm, Ø bore for input shaft: 25 mm (input side) , hole spacing of mounting holes: 92 x 92 mm, Ø bore for input shaft: 14 mm (output side) ,used, minor signs of wear, 100% functional Gbodpfsi D I Txsx Agbjg