Column-Mounted Slewing Crane

Schmiedl Typ 2/Typ 3

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. Lredofz I Ehopfx Adkjw with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: good (used), For sale is a container bundle consisting of 3 x 20-foot containers. The units are insulated office or residential containers, each featuring a single-leaf entrance door and a secondary door with wind protection on one end, as well as two tilt-and-turn windows on the opposite end. The containers are fully equipped and ready for use, with electrical wiring (including fuse box), multiple power outlets, lighting, and electric radiators. Previously used as residential containers, they are in good, weather-tight condition. Each container features an exterior 400-Volt connection (with pass-through available). The listed price applies to all three containers when purchased as a package. Transport can be arranged upon request. The containers can be delivered to your desired location and positioned precisely using the crane mounted on the delivery vehicle. Any additional transport costs due to distance will need to be clarified in advance. Ljdpfx Ash Hx Nhedkorw

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 12/2026, total width: 1,380 mm, total length: 950 mm, total height: 1,980 mm, input frequency: 50 Hz, overall weight: 258 kg, electrical fuse: 32 A, power: 21 kW (28.55 HP), Hobart universal dishwasher XL Model: UXTLS - Basket size: 1140 x 680 mm - Insertion height: 850 mm - Simple operation with 3 programmes and colour display - Drain pump - Detergent dosing device - Rinse aid dosing device Dimensions: 1380 x 950 x 1980 mm (W x D x H) Connection: 400V, 32A CEE plug Used machine, cleaned Options: Delivery service Water filter Maintenance contract Service package Instruction & commissioning Find your dishwasher with us! Ljdpfxewmvz Do Adkjrw

Year of construction: 2002, condition: good (used), machine/vehicle number: SIKBK, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Lrodpfxemqf Nbj Adkow Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,400 mm, spindle diameter: 100 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, The machine is in good technical condition, currently disconnected. Heidenhain TNC 530i control system, chip conveyor, tool magazine 40 pcs. Lrodpfxov Upbne Adksw

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Ledpfx Adsrt Ip Nokorw Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Lodpfx Adewl Ag Dekjrw Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Condition: ready for operation (used), Load capacity: 5000kg. Lsdpfx Aet H Rfbsdkjrw

Condition: used, Year of construction: 2008, Technical details: x-travel: 6500 mm Lsdpovmz I Rsfx Adksrw y-travel: 1400 mm z-travel: 1000 mm table surface area: 7000 x 1100 mm milling head speed: 15 - 4000 U/min spindle taper ISO: 50 rapid speed: 20 m/min feed speeds: 1 - 10000 mm/min total power requirement: 75 kW weight of the machine ca.: 30 t with CNC SIEMENS 840 D autom indexing head 0,001 x 0,001 autom toolchanger 100-pockets through spindle coolant 30 bar chip conveyor *

Condition: excellent (used), Year of construction: 2007, Lot of 36 pillar cranes Lifting capacity 500 kg to 2000 Kg Price 89.000 Euro Lrjdpfx Ael R Izbodkow