Die-Cutting-Machine

Sanwa TRP-820-SE SOPHIA

Condition: excellent (used), Year of construction: 2011, Screen PT-R 4300E Year of manufacture: 2011 SCL automatic plate loading Plates imaged: 114,000 Fuji 1-Bit Tiffbox Good condition. Dedpfxox T Tfte Alfjwd

Condition: new, - Motor power 7.5 kW - Cutting force 20 tons Cutting channel designed for: - max. roll length 1100 mm - max. roll diameter 900 mm - Machine weight approx. 2500 kg - Tank capacity approx. 100 liters - Hand protection guard in the area of the control panel and opposite Dwjdpoftnt Nsfx Alfed - Color scheme: Housing RAL according to customer requirements Protective guard/knife bar RAL 1028 melon yellow Made to order Price and further information on request.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder Dwjdpet H Nhhsfx Alfsd 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Year of construction: 2013, condition: used, Sewing machine Müller Martini Ventura MC (3215) Year: 2013 Description: - Colour monitor with touch screen - Semi automatic setting - Feeder - ASIR Automatic Signature Image Recognition: Asir III - 2 + 2 opening possibilities - Book block separator - Book stacker - Roller table delivery Dedpsrmyp Rjfx Alfjwd - PIAB/Venturi

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 160 t, Hydraulic 160 T double cylinder insertion press Double column press- two cylinder press with 160 T capacity at 250 bar. a) idle speed downward 9,8 mm/sec. b) upward speed up to 15,0 mm/sec. c) table size 1500x600x100 mm, height adjustable d) ram plate, 1500x600x100 mm e) year of construction 12/2020 f) motor power 11 KW g) pump capacity 22 L/minute h) travel limitation by cam switch i) Open height 700 mm j) ram travel 500 mm k) Remote control via two-hand operation l) Pressure setting via rotary control from approx. 30 to 160 T m) Approx. height 2800 mm n) T-slots according to customer requirements Dedpfxsgz H Dhs Alfowd o) Weight approx. 4,200 kg p) Oil tank with approx. 200 L volume q) Painting in RAL 5005 ( royal blue ) or according to customer's request. r) For safety reasons the ram plate is painted orange RAL 2009 or signal yellow RAL 1023 s) Assembly, commissioning, instruction can be provided at a separate charge. The travel can be adjusted by cam switches. The ram/table size of the machine shown is 1600x600x100 mm.

Condition: excellent (used), Year of construction: 2007, Print counter (m): ca. 70 Power: max. 15.000 sheets/hour Format (mm): Max. Paper Size: 750 x 600 mm // Min. Paper Size: 280 x 200 mm Max. Printing Area: 745 x 545 mm Printing: 5/0 or switchable 2/3 Dwedpfx Aljz N Egkjfjd Paper Thickness: 0,04 – 0,6 mm Dampening preparation: Filmfeuchtwerk RYOBI matic New ink application rollers

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker Dwedpfx Aozlqzgslfed - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Dwedpfx Aoyz Adnolfjd Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Djdpoyuztgsfx Alfjwd Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: used, Gullotine Wohlenberg WP 115 MCS-2 TV with Light guard and air bed. Schneidmaschine / Gullotine Wohlenberg WP 115 MCS-2 TV Baujahr / Year 1994 - Serial-No. 3563-009 Schnittbreite / Cutting width max. 1150mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Dodpfx Ajyc Ul Ejlfowd Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test